16/30336914 DC : 0
NA
Status of Standard is Unknown
BS EN 60076-57-129 ED 1.0 - CONVERTOR TRANSFORMERS - PART 57-129: TRANSFORMERS FOR HVDC APPLICATIONS
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Rating data
6 Losses
7 Test requirements
8 Tests
9 Dielectric tests on transformers that
have been in service
10 Sound levels
11 Bushings
12 Tap-changer
13 High-frequency modelling
14 Tolerances
15 Rating plate
Annex A (informative) - In service overloading
of HVDC converter transformers used
with current commutated valves (either
mercury arc valves or thyristors)
Annex B (informative) - HVDC converter transformers
for use with voltage source converters
Annex C (informative) - Design review
Annex C (informative) - Design review
Annex D (informative) - Transformer specification content
Annex E (informative) - Audible sound of converter
transformers
Annex F (informative) - Determination of transformer
service load loss at rated nonsinusoidal
converter current from measurements with
rated transformer current of fundamental frequency
Bibliography
BS EN 60076-57-129 Ed 1.0.
| Committee |
PEL/14
|
| DocumentType |
Draft
|
| Pages |
49
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEC 60076-7:2005 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
| IEC/IEEE 65700-19-03:2014 | Bushings for DC application |
| IEC 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| IEC 60076-5:2006 | Power transformers - Part 5: Ability to withstand short circuit |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE C57.19.00 : 2004 | GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
| IEC 60567:2011 | Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance |
| IEC TS 61973:2012 | High voltage direct current (HVDC) substation audible noise |
| IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| IEC 60076-3:2013 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| IEC 60050-421:1990 | International Electrotechnical Vocabulary (IEV) - Part 421: Power transformers and reactors |
| IEC TR 60146-1-2:2011 | Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guide |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| IEC 61378-3:2015 | Converter transformers - Part 3: Application guide |
| IEC 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
| IEEE C57.130-2015 | IEEE Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests for the Evaluation of Mineral Oil-Immersed Transformers and Reactors |
| IEEE C57.12.10-2010 REDLINE | IEEE Standard Requirements for Liquid-Immersed Power Transformers |
| IEC 61378-1:2011 | Converter transformers - Part 1: Transformers for industrial applications |
| IEC 60214-2:2004 | Tap-changers - Part 2: Application guide |
| IEC 60214-1:2014 | Tap-changers - Part 1: Performance requirements and test methods |
| IEEE C57.131-2012 | IEEE Standard Requirements for Tap Changers |
| IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.