15/30297232 DC : 0
NA
Status of Standard is Unknown
BS 1363-1 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Conditions of use
3 Terms and definitions
4 General
5 General conditions for type testing
6 Classification
7 Marking and labelling
8 Clearances, creepage distances and solid
insulation
9 Accessibility of live parts
10 Provision for earthing
11 Terminals and terminations
12 Construction of plugs
13 (not used)
14 Resistance to ageing and to humidity
15 Insulation resistance and electric strength
16 Temperature rise
17 Breaking capacity of switches incorporated in
fused plugs
18 Normal operation of switches
19 Connection of flexible cables and cable anchorage
20 Mechanical strength
21 Screws, current-carrying parts and connections
22 Resistance to heat
23 Resistance to abnormal heat, fire and tracking
24 Resistance to excessive residual stresses and to
rusting
25 Electrical and thermal stress of clamp type (screwless)
terminals
26 Overload tests
27 Cyclic loading test
Annexes
Annex A (normative) - The construction and calibration
of a calibrated link
Annex B (normative) - Measurement of clearance and
creepage distances
Annex C (normative) - Determination of the Comparative
Tracking Index (CTI) and Proof Tracking Index (PTI)
Annex D (normative) - Relation between rated impulse
withstand voltage, rated voltage and Overvoltage
Category
Annex E (normative) - Pollution degree
Annex F (normative) - Impulse voltage test
Annex G (normative) - Requirements for incorporated
electronic components
Annex H (informative) - Specific structure of BS EN 50525
and its derivation from British Standards and from
HD 21 and HD 22 (BS EN 50525-1:2011, National
Annex NA)
Annex I (informative) - Recommendations for products that
incorporate BS 1363-1 plug pins
Annex J (informative) - Dimensions for plug profiles
Bibliography
BS 1363-1.
| Committee |
PEL/23
|
| DocumentType |
Draft
|
| Pages |
94
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| BS EN 50525-2-71:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Flat tinsel cables (cords) with thermoplastic PVC insulation |
| IEC 60038:2009 | IEC standard voltages |
| BS EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems Principles, requirements and tests |
| BS 1363-2(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS |
| BS EN 61140 : 2002 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT |
| BS EN 60695-10-2:2014 | Fire hazard testing Abnormal heat. Ball pressure test method |
| BS EN 50525-2-11:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750V (U0/U) Cables for general applications. Flexible cables with thermoplastic PVC insulation |
| BS EN 61032:1998 | Protection of persons and equipment by enclosures. Probes for verification |
| BS EN 50525-2-21:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Flexible cables with crosslinked elastomeric insulation |
| BS EN 60112 : 2003 | METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
| BS 7211:2012 | Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire |
| BS EN 50525-1:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) General requirements |
| BS EN 60695-1-11:2015 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment |
| BS EN 60664-5:2003 | Insulation coordination for equipment within low-voltage systems A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm |
| BS 1363-5:2008 | 13 A plugs, socket-outlets, adaptors and connection units Specification for fused conversion plugs |
| BS 1363-4(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED |
| BS EN 61180-1:1995 | High-voltage test techniques for low-voltage equipment Definitions, test and procedure requirements |
| BS EN 60695-2-11:2014 | Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT) |
| BS 7919:2001 | Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments |
| BS EN 10270-1 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| BS EN 60664-3:2017 | Insulation coordination for equipment within low-voltage systems Use of coating, potting or moulding for protection against pollution |
| BS EN 50525-2-12:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Cables with thermoplastic PVC insulation for extensible leads |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.