14/30278953 DC : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
Available format(s)
Hardcopy , PDF
Superseded date
31-07-2015
Superseded by
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative References
3 Terms and definitions
4 Requirements for design analysis and examination
5 Requirements for design and manufacture
of rides and structures
Annex A (informative) - Fatigue analysis
Annex B (normative) - Electrical equipment and
control systems
Annex C (informative) - Control systems - Best practices
Annex D (informative) - Guidance on design of passenger
containment
Annex E (informative) - Device log (log book) for an
amusement device
Annex F (informative) - List of hazards
Annex G (informative) - Guest behaviour
Annex H (informative) - Limited accessibility to
amusement devices
Annex I (informative) - Safety envelope for passengers
Bibliography
BS ISO 17842-1.
| Committee |
MCE/3/4
|
| DocumentType |
Draft
|
| Pages |
183
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| ISO 10547:2009 | Polyester fibre ropes Double braid construction |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| BGR 181 : 2003 | FUSSBOEDEN IN ARBEITSRAEUMEN UND ARBEITSBEREICHEN MIT RUTSCHGEFAHR |
| ISO 1141:2012 | Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes |
| ISO 11666:2010 | Non-destructive testing of welds Ultrasonic testing Acceptance levels |
| ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
| ISO 10325:2009 | Fibre ropes High modulus polyethylene 8-strand braided ropes, 12-strand braided ropes and covered ropes |
| ISO 23277:2015 | Non-destructive testing of welds Penetrant testing Acceptance levels |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 10556:2009 | Fibre ropes of polyester/polyolefin dual fibres |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| ISO/TR 23849:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| ISO/TR 20173:2009 | Welding Grouping systems for materials American materials |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| EN 13889:2003+A1:2008 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 14731:2006 | Welding coordination Tasks and responsibilities |
| ISO 10572:2009 | Mixed polyolefin fibre ropes |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 9554:2010 | Fibre ropes General specifications |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 23278:2015 | Non-destructive testing of welds Magnetic particle testing Acceptance levels |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| DIN 51130:2014-02 | Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test |
| ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 10554:2009 | Polyamide fibre ropes Double braid construction |
| ISO 9692-1:2013 | Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 1181:2004 | Fibre ropes — Manila and sisal — 3-, 4- and 8-strand ropes |
| EN 1069-1:2017 | Water slides - Part 1: Safety requirements and test methods |
| IEC 60364-7-740:2000 | Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ISO 9692-3:2016 | Welding and allied processes Types of joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| EN 50172:2004 | Emergency escape lighting systems |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| AS 3533.1-2009 | Amusement rides and devices Design and construction |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| ISO 2307:2010 | Fibre ropes Determination of certain physical and mechanical properties |
| ISO 1346:2012 | Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) 3-, 4-, 8- and 12-strand ropes |
| EN 1261:1995 | Fibre ropes for general service - Hemp |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| GOST R 53130 : 2008 | SAFETY OF ATTRACTIONS - GENERAL REQUIREMENTS |
| ISO 23279:2017 | Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds |
| ISO 9692-2:1998 | Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| EN 288-9 : 1999 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST FOR PIPELINE WELDING ON LAND AND OFFSHORE SITE BUTT WELDING OF TRANSMISSION PIPELINES |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
| IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| GOST 12.2.049 : 1980 | OCCUPATIONAL SAFETY STANDARDS SYSTEM - INDUSTRIAL EQUIPMENT - GENERAL ERGONOMIC REQUIREMENTS |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| ISO 4018:2011 | Hexagon head screws Product grade C |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.