14/30244780 DC : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
Available format(s)
Hardcopy , PDF
Superseded date
30-06-2016
Superseded by
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative References
3 Definitions
4 Comparative performance assessment
at standard reference conditions
5 Performance at site conditions
6 Site conditions and utilities
7 Discharges and emissions to the environment
8 Contract fuels
9 Fuel systems and treatment
10 National regulations, codes and standards
11 Operating requirements
12 Quality
13 Reliability, availability, maintainability
14 Safety requirements
15 Measurement, language, identification and
standardisation
16 Corrosion prevention, painting and finishing
17 Packing and transportation
18 Gas turbine
19 Gearboxes and couplings
20 Air inlet system
21 Exhaust system
22 Civil design and foundation requirements
23 Generator design interface requirements
24 Heat recovery steam generator
25 Combined cycle applications
26 Control and instrumentation requirements
27 Electrical system requirements
28 Maintenance requirements
29 Enclosures
30 Auxiliary equipment
31 Condition monitoring
32 Installation and commissioning
33 Verification testing
34 Design life
35 Technical information and documents
Annex A (informative) - Data Sheets
Bibliography
BS ISO 19859.
| Committee |
MCE/16
|
| DocumentType |
Draft
|
| Pages |
194
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| ISO 10816-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings |
| IEEE 519-2014 REDLINE | IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems |
| ISO 6743-5:2006 | Lubricants, industrial oils and related products (class L) Classification Part 5: Family T (Turbines) |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| EN 50160 : 2010 AMD 1 2015 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| IEC 60038:2009 | IEC standard voltages |
| ISO 14691:2008 | Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications |
| ISO 3977-4:2002 | Gas turbines — Procurement — Part 4: Fuels and environment |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| ISO 19840:2012 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
| IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| AGMA 6011 : I | SPECIFICATION FOR HIGH SPEED HELICAL GEAR UNITS |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| IEC 61000-2-4:2002 | Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| ISO 18752:2014 | Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification |
| ISO 7919-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings |
| ISO 8504-1:2000 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 1: General principles |
| IEEE 762-2006 | IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity |
| ASHRAE 52.2 : 2017 | METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE |
| IEC 60502:1994 | Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| ISO 3977-1:1997 | Gas turbines — Procurement — Part 1: General introduction and definitions |
| ISO 10816-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
| EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
| ISO 11086:1996 | Gas turbines — Vocabulary |
| ISO 7919-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| ISO 12151-2:2003 | Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| IEC 61643-12:2008 | Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles |
| ISO 10814:1996 | Mechanical vibration Susceptibility and sensitivity of machines to unbalance |
| NAS1638:2011 | CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS |
| ISO/TS 81346-3:2012 | Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines |
| IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
| ISO 3977-9:1999 | Gas turbines — Procurement — Part 9: Reliability, availability, maintainability and safety |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| ISO 9613-2:1996 | Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 13480-1:2017 | Metallic industrial piping - Part 1: General |
| ISO 2533:1975 | Standard Atmosphere |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
| IEC 60947-7-1:2009 | Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
| ISO 8501-3:2006 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 4263-1:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
| IEC TR 61000-5-2:1997 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling |
| IEC 60034-3:2007 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| ISO 10005:2005 | Quality management systems Guidelines for quality plans |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| IEC 62040-1:2017 EXV | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| ISO 11124-1:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 1: General introduction and classification |
| IEC 60757:1983 | Code for designation of colours |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| ISO 11126-1:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification |
| IEC 62305-1:2010 | Protection against lightning - Part 1: General principles |
| IEEE C95.3-2002 | IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEC 62040-2:2016 | Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements |
| API 670 : 2014 | MACHINERY PROTECTION SYSTEMS |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| ISO 10380:2012 | Pipework — Corrugated metal hoses and hose assemblies |
| IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| ISO 11042-1:1996 | Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation |
| ISO 21789:2009 | Gas turbine applications — Safety |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| ISO 11042-2:1996 | Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 3977-8:2002 | Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| ISO 16276-2:2007 | Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61786:1998 | Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings - Special requirements for instruments and guidance for measurements |
| EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| ISO 14726:2008 | Ships and marine technology — Identification colours for the content of piping systems |
| ISO 128-1:2003 | Technical drawings General principles of presentation Part 1: Introduction and index |
| IEC 61000-2-2:2002+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| ISO 8501-2:1994 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| ISO 12151-1:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO 19860:2005 | Gas turbines — Data acquisition and trend monitoring system requirements for gas turbine installations |
| ISO 10817-1:1998 | Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration |
| ISO 4261:2013 | Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications |
| IEC 62305-4:2010 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| ISO 10441:2007 | Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications |
| ISO 22266-1:2009 | Mechanical vibration Torsional vibration of rotating machinery Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW |
| ISO 21940-32:2012 | Mechanical vibration — Rotor balancing — Part 32: Shaft and fitment key convention |
| ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| ISO/IEC 90003:2014 | Software engineering Guidelines for the application of ISO 9001:2008 to computer software |
| ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| ISO 3977-3:2004 | Gas turbines — Procurement — Part 3: Design requirements |
| ISO 7919-3:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines |
| EN 50522:2010 | Earthing of power installations exceeding 1 kV a.c. |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 14713-2:2009 | Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing |
| ISO 10396:2007 | Stationary source emissions — Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| IEEE C50.13 : 2014 | CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| EN 1838:2013 | Lighting applications - Emergency lighting |
| ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
| ISO 10494:1993 | Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method |
| ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
| IEC TR 61000-5-1:1996 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.