13/30280743 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
Hardcopy , PDF
31-05-2015
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information needed for the execution of the works
5 Geotechnical investigation
6 Materials and products
7 Considerations related to design
8 Execution
9 Supervision, monitoring and testing
10 Records
11 Special requirements
Annex A (informative) - Execution methods of micropiles
Annex B (informative) - Minimum cover (in mm) for
reinforcement and bearing element of low
strength steel for cast in situ micropiles
taking into account exposure classes related
to environmental actions as defined in
EN 206-1
Annex C (informative) - Borehole testing and pregrouting
Annex D (informative) - Guideline for a record for micropiles
Annex E (informative) - Degree of obligation of the provisions
BS EN 14199.
| Committee |
B/526
|
| DocumentType |
Draft
|
| Pages |
63
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 14199 : DRAFT 2013 | Identical |
| EN ISO 9692-1:2013 | Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013) |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
| EN 1536:2010+A1:2015 | Execution of special geotechnical work - Bored piles |
| EN 996:1995+A3:2009 | Piling equipment - Safety requirements |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN ISO 18276:2017 | Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017) |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 791:1995+A1:2009 | Drill rigs - Safety |
| EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| EN 445:2007 | Grout for prestressing tendons - Test methods |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| EN ISO 17660-1:2006 | Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006) |
| EN ISO 14341:2011 | Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010) |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
| EN ISO 2560:2009 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 17632:2015 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| EN 447:2007 | Grout for prestressing tendons - Basic requirements |
| PREN 10138-4 : DRAFT 2000 | PRESTRESSING STEELS - PART 4: BARS |
| EN 1537:2013 | Execution of special geotechnical works - Ground anchors |
| EN ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010) |
| EN 13670:2009 | Execution of concrete structures |
| EN 757:1997 | Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
| EN 1998-5:2004 | Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining structures and geotechnical aspects |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.