12/30260516 DC
Current
The latest, up-to-date edition.
BS EN 15250 - SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of appliances and system boundary
for roomsealed appliances
5 Materials, design and construction
6 Safety
7 Performance
8 Appliance instructions
9 Marking
10 Evaluation of conformity
Annex A (normative) - Test methods
Annex B (normative) - Test fuels and recommended
fuels
Annex C (informative) - Calculation of an approximate
heat release curve against time
Annex D (informative) - Calculation of flue gas
temperatures on basis of DIN 4705,
EN 13384-1 and EN 15287
Annex E (normative) - Possibilities of installation for
roomsealed appliances
Annex F (informative) - Example of a suitable arrangement
for measuring the leakage rate of a
roomsealed appliance
Annex G (normative) - Measuring procedure for nitrogen
oxides (NOx)
Annex H (normative) - Measuring procedure for THC
Annex I (normative) - Measuring procedures for
particulate matter (PM)
Annex ZA (informative) - Clauses of this European
standard addressing the provisions of the
EU Construction Products Directive
Bibliography
BS EN 15250
| Committee |
RHE/28
|
| DocumentType |
Draft
|
| Pages |
122
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Standards | Relationship |
| PREN 15250 : DRAFT 2012 | Identical |
| EN 14989-2:2007 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| CEN/TS 15883:2009 | Residential solid fuel burning appliances - Emission test methods |
| EN 15148:2009 | Solid biofuels - Determination of the content of volatile matter |
| EN 50165 : 97 AMD 1 2001 | ELECTRICAL EQUIPMENT ON NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS |
| EN 1856-2:2009 | Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| ISO 1928:2009 | Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
| EN 14918:2009 | Solid biofuels - Determination of calorific value |
| ISO 334:2013 | Solid mineral fuels Determination of total sulfur Eschka method |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| ISO 7-2:2000 | Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
| EN 13063-3:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| ISO 331:1983 | Coal Determination of moisture in the analysis sample Direct gravimetric method |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 15104:2011 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| EN 14775:2009 | Solid biofuels - Determination of ash content |
| ISO 687:2010 | Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample |
| ISO 501:2012 | Hard coal — Determination of the crucible swelling number |
| EN 14774-1:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method |
| EN 1856-1:2009 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
| ISO 1171:2010 | Solid mineral fuels — Determination of ash |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 562:2010 | Hard coal and coke — Determination of volatile matter |
| EN 1561:2011 | Founding - Grey cast irons |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.