09/30167487 DC : 2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS ISO 21457 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
Hardcopy , PDF
30-09-2010
English
01-01-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Ordering information
5 Materials selection report
6 General guidelines for corrosion evaluations and materials
selection
6.1 General
6.2 Internal corrosion in oil and gas production and
processing
6.2.1 Corrosion evaluation
6.2.2 Corrosion mechanisms
6.2.3 Corrosion parameters
6.3 Internal corrosion in injection systems
6.4 Internal corrosion in utility systems
6.5 Sand erosion
6.6 External corrosion evaluation
6.6.1 General
6.6.2 External marine atmospheric environments
6.6.3 External non-marine atmospheric environments
6.6.4 External corrosion for buried and submerged
installations
6.6.5 Corrosion under insulation (CUI)
6.7 Polymeric materials
6.8 Glass-fibre-reinforced plastic
6.9 Mechanical properties and material usage limitations
6.9.1 General
6.9.2 Submerged installations
7 Materials selection for specific applications and/or systems
7.1 General
7.2 Oil and gas production and processing systems
7.2.1 General
7.2.2 Heat exchangers
7.2.3 Wellhead, production and process systems
7.2.4 Flare systems
7.2.5 Produced water
7.3 Injection systems
7.3.1 General
7.3.2 De-aerated seawater
7.3.3 Aerated seawater
7.3.4 Produced-water and aquifer-water
7.3.5 Gas injection systems
7.4 Utility systems
7.4.1 General
7.4.2 Fresh-water systems
7.4.3 Seawater-carrying systems
7.4.4 Other utility systems
7.5 Pipelines and flowlines
8 Corrosion control
8.1 Chemical treatment
8.2 Internal corrosion allowance
8.3 Selection of internal and external coatings
8.4 External splash zone protection
8.5 Cathodic protection
8.5.1 Offshore
8.5.2 Onshore
8.6 Corrosion protection of closed compartments
8.7 Connection of dissimilar materials
8.7.1 Piping systems
8.7.2 Submerged installations
8.7.3 Structural installations
8.8 Sealing materials
8.9 Fasteners
8.10 Weld overlay
8.11 Weld consumables
8.12 Corrosion management
Annex A (informative) - Design basis for hydrocarbon systems
Annex B (informative) - Corrosion monitoring
B.1 General
B.2 Location of probes
Annex C (informative) - Chemical composition of some typical
oilfield alloys
Bibliography
| Committee |
PSE/17/-/7
|
| DocumentType |
Draft
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| ISO 15663-2:2001 | Petroleum and natural gas industries Life-cycle costing Part 2: Guidance on application of methodology and calculation methods |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
| NACE RP 04 03 : 2003 | AVOIDING CAUSTIC STRESS CORROSION CRACKING OF CARBON STEEL REFINERY EQUIPMENT AND PIPING |
| NACE RP 01 98 : 2004 | THE CONTROL OF CORROSION UNDER THERMAL INSULATION AND FIREPROOFING MATERIALS - A SYSTEMS APPROACH |
| NACE SP 01 76 : 2007 | CORROSION CONTROL OF SUBMERGED AREAS OF PERMANENTLY INSTALLED STEEL OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 15156-1:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
| ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.