02/104236 DC : DRAFT JUNE 2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EN 14487-1 - SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY
09-01-2006
23-11-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 Mix Component
3.2 Product
3.3 Process
3.4 Properties
3.5 Execution
3.6 Operative
3.7 Test/Inspection
4 Classification and designation
4.1 Consistence of wet mix
4.2 Exposure classes
4.3 Young sprayed concrete
4.4 Compressive strength
4.5 Flexural strength
4.6 Fibre reinforced sprayed concrete
5 Requirements for sprayed concrete
5.1 Requirements for constituent materials
5.2 Requirements for sprayed concrete composition
5.3 Requirements on the basic mix
5.4 Requirements on the fresh sprayed concrete
5.5 Requirements on hardened sprayed concrete
6 Specification of sprayed concrete
6.1 General
6.2 Data for specifying designed mixes
6.3 Data for specifying prescribed mix
7 Assessment of conformity
7.1 General
7.2 Inspection classification
7.3 Preconstruction testing
7.4 Production control
7.5 Conformity criteria
Annex A (informative) Guidelines for Definitions, Specifications
and Conformity for Sprayed concrete
Annex B (informative) General Guidelines for Steel Fibres
for Sprayed Concrete
EN 14487-1
| Committee |
B/517/1
|
| DocumentType |
Draft
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 14487-1 : DRAFT 2002 | Identical |
| PREN 14487-1 : DRAFT 2002 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| EN 12390-8:2009 | Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| PREN 14488-4 : DRAFT 2002 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
| ISO 6784:1982 | Concrete Determination of static modulus of elasticity in compression |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| PREN 12620 : DRAFT 2015 | AGGREGATES FOR CONCRETE |
| ISO 758:1976 | Liquid chemical products for industrial use — Determination of density at 20 degrees C |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| ISO 4012:1978 | Concrete — Determination of compressive strength of test specimens |
| EN 934-5:2007 | Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling |
| ENV 13670-1 : DRAFT 2000 | EXECUTION OF CONCRETE STRUCTURES - PART 1 - COMMON |
| EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| PREN 14488-2 : DRAFT 2002 | TESTING SPRAYED CONCRETE - PART 2: COMPRESSIVE STRENGTH OF YOUNG SPRAYED CONCRETE |
| EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| PREN 1504-3 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
| PREN 14488-1 : DRAFT 2002 | TESTING SPRAYED CONCRETE - PART 1: SAMPLING FRESH AND HARDENED CONCRETE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.