I.S. EN 13530-2:2002
Current
The latest, up-to-date edition.
CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
English
01-01-2002
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Design
5 Fabrication
6 Inspection and testing
Annex A (informative) - Elastic stress analysis
Annex B (normative) - Additional requirements for 9% Ni steel
Annex C (normative) - Pressure strengthening of vessels from
austenitic stainless steels
Annex D (informative) - Specific weld details
Annex E (normative) - Increased material property for austenitic
stainless steel
Annex F (informative) - Outer jacket relief devices
Bibliography
Describes requirements for the design, fabrication, inspection and testing of large transportable vacuum insulated cryogenic vessels.
| DevelopmentNote |
COR 2006 issued on 05-08-2011. (08/2011)
|
| DocumentType |
Standard
|
| Pages |
143
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 13530-2:2003-01 | Identical |
| EN 13530-2:2002 | Equivalent |
| NBN EN 13530-2 : 2003 COR 2006 | Identical |
| NS EN 13530-2 : 2002 AC 2006 | Identical |
| BS EN 13530-2:2002 | Identical |
| BS EN 13530-2:2002 | Equivalent |
| NEN EN 13530-2 : 2002 C1 2006 | Identical |
| NF EN 13530-2 : 2003 AMD 1 2004 | Identical |
| UNE-EN 13530-2:2003 | Identical |
| EN 1252-2:2001 | Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| EN 1708-1:2010 | Welding - Basic welded joint details in steel - Part 1: Pressurized components |
| EN 288-1:1992/A1:1997 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
| EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| EN 288-4:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURES FOR THE ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| EN 895:1995 | Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| EN 1797:2001 | Cryogenic vessels - Gas/material compatibility |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| EN 1626:2008 | Cryogenic vessels - Valves for cryogenic service |
| EN 12300 : 1998 AMD 1 2006 | CRYOGENIC VESSELS - CLEANLINESS FOR CRYOGENIC SERVICE |
| EN 287-2:1992/A1:1997 | APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS |
| ISO 1106-1:1984 | Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick |
| EN 875:1995 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
| EN 13530-1:2002 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements |
| EN 288-8 : 1995 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 8: APPROVAL BY A PRE-PRODUCTION WELDING TEST |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| EN 10028-4:2017 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
| EN 13068-3:2001 | Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.