EN 20105-A02:1994
Current
Current
The latest, up-to-date edition.
Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
Published date
30-08-1994
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Principle
3 Describing colour changes in fastness tests
Describes the grey scale for determining changes in colour of textiles in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared. The essential scale (5 steps) consists of pairs of non-glossy grey colour chips (or swatches of grey cloth). In addition, an augmented scale includes four half-steps and, thus, 9 steps.
| Committee |
CEN/TC 248
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 20105-A02:1995 | Identical |
| DIN EN 20105-A02:1994-10 | Identical |
| ISO 105-A02:1993 | Identical |
| NF EN 20105 A02 : 1994 | Identical |
| NBN EN 20105 A02 : 1995 | Identical |
| I.S. EN 20105-A02:1995 | Identical |
| NEN ISO 105-A02 : 1994 | Identical |
| PN EN 20105-A02 : 1996 | Identical |
| UNE-EN 20105-A02:1998 | Identical |
| I.S. EN ISO 105-EO8:1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E08: COLOUR FASTNESS TO HOT WATER |
| DIN EN 14906:2012-08 | Leather - Leather for automotive - Test methods and testing parameters |
| PREN 17142 : DRAFT 2017 | MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 877:1997 | |
| PD CEN/TS 16641:2014 | Textile floor coverings. Guidelines for acceptable colour deviations |
| 06/30156314 DC : 0 | BS EN 13120 - INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| 06/30147607 DC : DRAFT MAR 2006 | EN 13138-3 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
| 12/30254411 DC : 0 | BS EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
| DIN EN 15619 E : 2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| BS EN 16732:2015 | Slide fasteners (zips). Specification |
| DIN EN 124-6:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| 12/30256977 DC : 0 | BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| 13/30291069 DC : 0 | BS EN 12608-1 - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES |
| 12/30212156 DC : 0 | BS EN 13138-3:2007 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
| 06/30140500 DC : DRAFT MAR 2006 | EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
| DIN EN 16732:2016-05 | Slide fasteners (zips) - Specification |
| BS EN 15619:2014 | Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures |
| I.S. EN 15836-2:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| EN 14565:2004 | Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification |
| I.S. EN 62329-2:2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| I.S. EN 15619:2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| I.S. EN 14565:2004 | RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| I.S. EN ISO 17700:2005 | FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING |
| BS EN ISO 12947-4 : 1999 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE |
| BS EN 13120 : 2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 13138-1:2015-02 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
| DIN EN 13138-3:2015-02 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
| DIN EN 15330-2:2015-09 (Draft) | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES |
| DIN EN 13561:2015-08 | External blinds and awnings - Performance requirements including safety |
| DIN EN ISO 12947-3:2007-04 | Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
| BS EN ISO 105-N02:1995 | Textiles. Tests for colour fastness Colour fastness to bleaching: Peroxide |
| BS EN ISO 105-X13:1997 | Textiles. Tests for colour fastness Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting |
| ISO 12947-3:1998 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss |
| BS EN ISO 11758:1997 | Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance |
| DIN EN 15200:2007-08 | Sanitary appliances - Multifunction shower cabinets |
| BS EN 14465:2003+A1:2006 | Textiles. Upholstery fabrics. Specification and methods of test |
| BS EN ISO 105-B08 : 1999 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7 |
| I.S. EN 15330-1:2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| EN 12877-2:1999 | Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding |
| CEN/TS 16641:2014 | Textile floor coverings - Guidelines for acceptable colour deviations |
| EN 12877-3:1999 | Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test |
| EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| EN ISO 16871:2003 | Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) |
| DIN EN 15115:2007-03 | Textile floor coverings - Determination of sensitivity to spilled water |
| EN 14906:2012 | Leather - Leather for automotive - Test methods and testing parameters |
| EN ISO 17700:2005 | Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing (ISO 17700:2004) |
| EN 13245-3:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| EN 12877-1:1999 | Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction |
| DIN EN 15836-1:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 11/30241848 DC : 0 | BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 12608:2003 | UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13516:2002 | FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR FASTNESS TO RUBBING |
| 14/30302452 DC : 0 | BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| BS EN 14906:2012 | Leather. Leather for automotive. Test methods and testing parameters |
| BS EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
| 15/30326242 DC : 0 | BS EN 15330-2 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES |
| BS EN 12608-1:2016 | Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods Non-coated PVC-U profiles with light coloured surfaces |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| I.S. EN ISO 105-G02:1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES |
| 08/30181781 DC : DRAFT JULY 2008 | BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| I.S. EN 16732:2015 | SLIDE FASTENERS (ZIPS) - SPECIFICATION |
| 08/30181778 DC : DRAFT JULY 2008 | BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| PREN 15330-1 : DRAFT 2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| I.S. EN 124-6:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| PREN 513 : DRAFT 2017 | PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| DIN EN 1471:2014-05 (Draft) | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE |
| DIN EN 14565:2004-09 | RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| DIN EN ISO 11378-2:2003-02 | TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST (ISO 11378-2:2001 + AMD 1:2017) |
| EN 13138-3:2014 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
| BS EN 13138-1:2008 | Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be worn |
| I.S. EN 13138-1:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
| I.S. EN 13138-2:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
| I.S. EN 263:2008 | SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES |
| I.S. EN 14877:2013 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION |
| I.S. EN 13245-1:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| DIN EN 12608:2003-09 | UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| DIN EN 13516:2002-04 | FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR FASTNESS TO RUBBING |
| I.S. EN 15330-2:2017 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES |
| I.S. EN 607:2004 | EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING |
| I.S. EN 12200-1:2016 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN 13138-3:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
| I.S. EN 13120:2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 13561:2015 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| PREN 15330-2 : DRAFT 2015 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES |
| I.S. EN ISO 25649-1:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
| PREN 13138-3 : DRAFT 2012 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
| 06/30147606 DC : DRAFT MAR 2006 | EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
| 15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| 07/30158824 DC : 0 | BS EN 15618 - RUBBER OR PLASTIC-COATED FABRICS - UPHOLSTERY FABRICS - CLASSIFICATION AND METHODS OF TEST |
| 08/30194094 DC : 0 | BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 62329-2:2006 | Heat shrinkable moulded shapes Methods of test |
| I.S. EN 13245-3:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| I.S. EN 15836-1:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| PREN 1471 : DRAFT 2014 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE |
| NF EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| DIN EN ISO 17700:2005-12 | FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING |
| I.S. EN 13329:2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| ONORM EN ISO 17700 : 2005 | FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING |
| DIN EN 13120:2014-09 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| BS EN 12877-4:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by two-roll milling |
| BS EN 12608:2003 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods |
| BS EN 1471:1997 | Textile floor coverings. Assessment of changes in appearance |
| ISO 15702:1998 | Leather — Tests for colour fastness — Colour fastness to machine washing |
| DIN EN 14877:2013-12 | Synthetic surfaces for outdoor sports areas - Specification |
| EN 12608-1:2016 | Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces |
| EN ISO 105-E10:1996 | Textiles - Tests for colour fastness - Part E10: Colour fastness to decatizing (ISO-E10:1994) |
| EN 607:2004 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| DIN EN 15836-2:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| DIN EN 13245-3:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| I.S. EN ISO 105-BO4:1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ARTIFICIAL WEATHERING: XENON ARC FADING LAMP TEST |
| BS EN 15836-1:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 12/30254414 DC : 0 | BS EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| BS EN 13245-3:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles |
| 06/30148739 DC : DRAFT APR 2006 | EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
| DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 13329 : 2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| 08/30189974 DC : DRAFT DEC 2008 | BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| 07/30158827 DC : 0 | BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| 02/123818 DC : DRAFT OCT 2002 | BS EN 14565 - RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| DIN EN 607:2005-02 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| BS EN ISO 105-C09:2003 | Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering. Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
| ISO 15700:1998 | Leather — Tests for colour fastness — Colour fastness to water spotting |
| BS EN 607:2004 | Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing |
| ISO 105-C09:2001 | Textiles — Tests for colour fastness — Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
| BS EN 263:2008 | Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| BS EN 13138-2:2014 | Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be held |
| BS EN 13277-1:2000 | Protective equipment for martial arts General requirements and test methods |
| BS EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system |
| BS EN 14565:2004 | Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification |
| BS EN 12877-2:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by injection moulding |
| DIN EN 13245-1:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| ISO 105-E08:1994 | Textiles — Tests for colour fastness — Part E08: Colour fastness to hot water |
| ISO 105-X13:1994 | Textiles — Tests for colour fastness — Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting |
| ISO 105-E10:1994 | Textiles — Tests for colour fastness — Part E10: Colour fastness to decatizing |
| BS EN 15200:2007 | Sanitary appliances. Multifunction shower cabinets |
| ISO 16871:2003 | Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering |
| ISO 17700:2004 | Footwear — Test methods for uppers, linings and insocks — Colour fastness to rubbing |
| BS EN ISO 105-N03:1995 | Textiles. Tests for colour fastness Colour fastness to bleaching: Sodium chlorite (mild) |
| BS EN 13245-1:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles |
| BS EN 13561:2015 | External blinds and awnings. Performance requirements including safety |
| ISO 105-X11:1994 | Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing |
| BS EN 12877-3:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by oven test |
| BS EN ISO 17700:2005 | Footwear. Test methods for uppers, linings and insocks. Colour fastness to rubbing |
| BS EN 15330-1:2013 | Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| DIN EN 15334:2007-05 | Sanitary appliances - Methacrylic dispersions of high filler content |
| EN ISO 105-N03:1995 | Textiles - Tests for colour fastness - Part N03: Colour fastness to bleaching - Sodium chlorite (mild) (ISO 105-N03:1993) |
| EN 15334:2007 | Sanitary appliances - Methacrylic dispersions of high filler content |
| EN 15330-1:2013 | Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| EN ISO 105-S02:1995 | Textiles - Tests for colour fastness - Part S02: Colour fastness to vulcanizing: Sulphur monochloride (ISO 105-S02:1993) |
| EN ISO 105-X02:1995 | Textiles - Tests for colour fastness - Part X02: Colour fastness to carbonizing: Sulphuric acid (ISO 105-X02:1993) |
| EN 15330-2:2017 | Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces |
| EN ISO 105-Z01:1995 | Textiles - Tests for colour fastness - Part Z01: Colour fastness to metals in the dyebath: Chromium salts (ISO 105-Z01:1993) |
| EN 1327:1996 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| EN ISO 105-X09:1995 | Textiles - Tests for colour fastness - Part X09: Colour fastness to formaldehyde (ISO 105-X09:1993) |
| EN 15115:2006 | Textile floor coverings - Determination of sensitivity to spilled water |
| EN ISO 105-Z06:2000 | Textiles - Tests for colour fastness - Part Z06: Evaluation of dye and pigment migration (ISO 105-Z06:1998) |
| EN 14877:2013 | Synthetic surfaces for outdoor sports areas - Specification |
| EN ISO 877:1996 | Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
| EN ISO 105-X08:1997 | Textiles - Tests for colour fastness - Part X08: Colour fastness to degumming (ISO 105-X08:1994) |
| EN ISO 105-E08:1996 | Textiles - Tests for colour fastness - Part E08: Colour fastness to hot water (ISO 105-E08:1994) |
| EN ISO 105-B05:1995 | Textiles - Tests for colour fastness - Part B05: Detection and assessment of photochromism (ISO 105-B05:1993) |
| EN ISO 15700:1999 | Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) |
| EN ISO 105-X14:1997 | Textiles - Tests for colour fastness - Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate (ISO 105-X14:1994) |
| EN 15619:2014 | Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures |
| EN ISO 105-N05:1995 | Textiles - Tests for colour fastness - Part N05: Colour fastness to stoving (ISO 105-N05:1993) |
| EN ISO 105-X13:1997 | Textiles - Tests for colour fastness - Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting (ISO 105-X13:1994) |
| EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| EN ISO 105-B04:1997 | Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO 105-B04:1994) |
| EN ISO 105-N04:1995 | Textiles - Tests for colour fastness - Part N04: Colour fastness to bleaching - Sodium chlorite (severe) (ISO 105-N04:1993) |
| EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN ISO 105-X05:1997 | Textiles - Tests for colour fastness - Part X05: Colour fastness - Part X05: Colour fastness to organic solvents (ISO 105-X05:1994) |
| EN ISO 15703:1999 | Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998) |
| EN 16732:2015 | Slide fasteners (zips) - Specification |
| EN ISO 105-G03:1997 | Textiles - Tests for colour fastness - Part G03: Colour fastness to ozone in the atmosphere (ISO 105-G03:1993) |
| EN ISO 105-X11:1996 | Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing (ISO-X11:1994) |
| EN ISO 105-S01:1995 | Textiles - Tests for colour fastness - Part S01: Colour fastness to vulcanization: Hot air (ISO 105-S01/1993) |
| EN ISO 15702:1999 | Leather - Tests for colour fastness - Colour fastness to machine washing (ISO 15702:1998) |
| EN ISO 105-X06:1997 | Textiles - Tests for colour fastness - Part X06: Colour fastness to soda boiling (ISO 105-X06:1994) |
| EN 263:2008 | Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| EN ISO 105-S03:1995 | Textiles - Tests for colour fastness - Part S03: Colour fastness to vulcanization: Open steam (ISO 105-S03:1993) |
| EN ISO 105-X07:1997 | Textiles - Tests for colour fastness - Part X07: Colour fastness to cross-dyeing: Wool (ISO 105-X07:1994) |
| EN ISO 105-N02:1995 | Textiles - Tests for colour fastness - Part N02: Colour fastness to bleaching - Peroxide (ISO 105-N02:1993) |
| EN ISO 105-X04:1997 | Textiles - Tests for colour fastness - Part X04: Colour fastness to mercerizing (ISO 105-X04:1994) |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| EN ISO 105-Z02:1995 | Textiles - Tests for colour fastness - Part Z02: Colour fastness to metals in the dyebath: Iron and copper (ISO 105-Z02:1993) |
| 13/30262917 DC : 0 | BS EN 15330-1 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| I.S. EN ISO 11758:1998 | RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE |
| 13/30289253 DC : 0 | BS EN 13329 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| 07/30161895 DC : 0 | BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 15836-2:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| DIN EN 15619:2014-07 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| 14/30302995 DC : 0 | BS EN 16776 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| 04/30055611 DC : 0 | BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
| BS EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| NF EN 13245-3 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| PREN 13138-2 : DRAFT 2012 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
| 06/30148736 DC : 0 | EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
| I.S. EN 14906:2012 | LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS |
| I.S. EN 12608-1:2016 | UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES |
| NF EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| PREN 13561 : DRAFT 2014 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| BS EN ISO 105-G02:1997 | Textiles. Tests for colour fastness Colour fastness to burnt-gas fumes |
| I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| 17/30359853 DC : 0 | BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| 17/30361211 DC : 0 | BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| S.R. CEN/TS 16641:2014 | TEXTILE FLOOR COVERINGS - GUIDELINES FOR ACCEPTABLE COLOUR DEVIATIONS |
| EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
| BS EN 13120:2009+A1:2014 | Internal blinds. Performance requirements including safety |
| DIN EN 15330-1:2013-12 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| DIN EN ISO 12947-4:2007-04 | Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
| DIN EN 12200-1:2016-10 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN 13138-2:2015-02 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
| BS EN 15330-2:2017 | Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for needle-punched surfaces for tennis and multi-sport surfaces |
| BS EN 13199-3:2000 | Packaging. Small load carrier systems Bond Stackable System (BSS) |
| BS EN 12877-1:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics General introduction |
| BS EN ISO 11378-2 : 2001 | TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST |
| BS EN ISO 12947-3 : 1999 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 3: DETERMINATION OF MASS LOSS |
| ISO 105-B08:1995 | Textiles — Tests for colour fastness — Part B08: Quality control of blue wool reference materials 1 to 7 |
| BS EN 13516:2002 | Footwear. Test methods for uppers, lining and insocks. Colour fastness to rubbing |
| BS EN 15334:2007 | Sanitary appliances. Methacrylic dispersions of high filler content |
| BS EN ISO 16871:2003 | Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering |
| BS EN 15115:2006 | Textile floor coverings. Determination of sensitivity to spilled water |
| ISO 12947-4:1998 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change |
| BS EN 14877:2013 | Synthetic surfaces for outdoor sports areas. Specification |
| BS EN 13138-3:2014 | Buoyant aids for swimming instruction Safety requirements and test methods for swim seats to be worn |
| ISO 15703:1998 | Leather — Tests for colour fastness — Colour fastness to mild washing |
| EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN 13277-1:2000 | Protective equipment for martial arts - Part 1: General requirements and test methods |
| EN 13138-1:2014 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
| EN 13199-3:2000 | Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS) |
| EN 13138-2:2014 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
| EN 62329-2:2006 | Heat shrinkable moulded shapes - Part 2: Methods of test |
| EN 12608:2003 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
| DIN EN 263:2008-06 | Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| I.S. EN ISO 12947-4:1999 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE |
| DIN EN ISO 105-B08:2010-02 | Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 (ISO 105-B08:1995 + Amd 1:2009) (includes Amendment A1:2009) |
| DIN EN 12608-1:2016-08 | UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES |
| DIN EN 15330-2:2017-09 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES |
| EN 13245-1:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| I.S. EN 1327:1996 | GAS WELDING EQUIPMENT - THERMOPLASTIC HOSES FOR WELDING AND ALLIED PROCESSES |
| I.S. EN ISO 105-B08:1999 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7 |
| I.S. EN 14465:2004 | TEXTILES - UPHOLSTERY FABRICS - SPECIFICATION AND METHODS OF TEST |
| I.S. EN ISO 105-C09:2003 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C09: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING - OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
| UNE-EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| I.S. EN ISO 11378-2:2001 | TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST (ISO 11378-2:2001) |
| I.S. EN 15115:2006 | TEXTILE FLOOR COVERINGS - DETERMINATION OF SENSITIVITY TO SPILLED WATER |
| UNE-EN 16732:2016 | Slide fasteners (zips) - Specification |
| UNE-EN 13245-3:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| UNE-EN 14906:2012 | Leather - Leather for automotive - Test methods and testing parameters |
| UNE-EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| UNE-EN 13138-2:2015 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
| UNE-EN 13138-3:2015 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
| UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| UNE-EN 12200-1:2017 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| UNE-EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| UNE-EN 12608-1:2016 | Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces |
| UNE-EN 13138-1:2015 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
| UNE-EN 13245-1:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| UNE-EN 13329:2016 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.