DIN ISO 2859-1:2014-08
Current
Current
The latest, up-to-date edition.
SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION (ISO 2859-1:1999 + COR. 1:2001 + AMD.1:2011)
Available format(s)
PDF
Language(s)
German - English
Published date
01-08-2014
US$289.24
Excluding Tax where applicable
This Standard is included in DIN Handbook 225 and 225-1.
| Committee |
TC 69
|
| DevelopmentNote |
Supersedes DIN 40080 (07/2002)
|
| DocumentType |
Standard
|
| Pages |
195
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IEC 60410:1973 | Identical |
| ISO 2859:1974 | Identical |
| ISO 2859-1:1999 | Identical |
| BWB TL 8920-0006 : 9ED 2007 | CRUSHED RYE BREAD |
| DIN EN 16728:2016-07 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION |
| BWB TL 4820-0024 : 2ED 2004 | |
| BWB TL 8970-0009 : 1ED 2004 | |
| BWB TL 4240-0057 : 1ED 2002 | SPECIAL FILTER, NBC PROTECTION, FLYING PERSONNEL |
| DIN EN 16256-3:2013-03 | PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 3: REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE |
| DIN EN 16265:2016-05 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
| BWB TL 8115-0007 : 4ED 2005 | LEBENSMITTEL-TRANSPORTBEHAELTER FUER VERPACKTE LEBENSMITTEL UND TRANSPORT-KISTE |
| BWB TL 7320-0068 : 1ED 2004 | FELDKUECHENARBEITSTISCHE MIT AUFNAHME FUER GEWUERZBEHAELTER UND KUECHENKLEINGERAET |
| BWB TL 4240-0060 : 1ED 2002 | COMBINATION FILTER, 60 CBM/HOUR, FOR NBC OVERPRESSURE SYSTEM |
| BWB TL 8465-0038 : 3ED 1999 | BOX, SANDWICH SPREAD |
| BWB TL 4020-0027 : 3ED 2003 | RESCUE ROPE, 8 MM DIAMETER, 30 M, WITH SPRING HOOK ON ONE SIDE |
| BWB TL 7360-0045 : 2ED 2005 | |
| BWB TL 6530-0092 : 2ED 2002 | |
| BWB TL 8455-0162 : 1ED 2003 | |
| BWB TL 6530-0096 : 4ED 2004 | STRETCHER CHASSIS, IN CONTAINER |
| BWB TL 4240-0017 : 1ED 2002 | SCREW FILTER, NON MAGNETIZABLE FOR NBC PROTECTIVE MASK |
| BWB TL 4220-0026 : 1ED 2002 | LIFE RAFT, 10 MAN, INFLATABLE; LIFE RAFT, 20 MAN, INFLATABLE |
| DIN EN ISO 1797:2016-05 (Draft) | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| DIN EN 60255-23 : 1997 | ELECTRICAL RELAYS - PART 23: CONTACT PERFORMANCE |
| BWB TL 8140-0060 : 7ED 2007 | REPAIR/REFURBISHMENT OF AMMUNITION BOXES, WOOD, PLYWOOD |
| DIN 7081:1999-05 | PRESSURE RESISTANT OBLONG SIGHT GLASSES OF BOROSILICATE GLASS WITHOUT LIMITATION IN THE RANGE OF LOW TEMPERATURE |
| BWB TL 8470-0067 : 4ED 2006 | ARMOR VEST, MILITARY POLICE |
| BWB TL 6530-0094 : 4ED 2007 | HEADREST FOR COVER, STRETCHER |
| DIN ISO 3534-2:2013-12 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS (ISO 3534-2:2006) |
| BWB TL 7125-0023 : 5ED 2005 | CONTAINER WITH INSERT FOR CLASSIFIED MATERIAL |
| DIN 9088:2002-11 | AEROSPACE SERIES - STORAGE LIFE OF RUBBER PRODUCTS |
| DIN EN 60926 : 2000 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| VDE 0712-14 : 2000 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| DIN EN 1006:2009-10 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
| DIN EN 16263-4:2015-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS |
| DIN 17455:1999-02 | WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 65591:1998-12 | AEROSPACE - BROAD WOVEN FABRIC, UNCOATED - TECHNICAL SPECIFICATION |
| DIN HDBK 225 : 3ED 2005 | |
| DIN EN 14241-1:2013-11 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| DIN EN ISO 12947-3:2007-04 | Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
| DIN EN 14035-38:2006-05 | FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS |
| DIN EN 12899-4:2008-02 | Fixed, vertical road traffic signs - Part 4: Factory production control |
| DIN EN ISO 9163:2005-07 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005 |
| DIN 6799:2011-04 | RETAINING WASHERS FOR SHAFTS |
| DIN EN 133200 : 2000 | SECTIONAL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS, FOR WHICH SAFETY TESTS ARE REQUIRED) |
| BWB TL 8315-0018 : 7ED 2012 | UNIFORM BUTTONS METAL FOR ARMY AND AIR FORCE |
| BWB TL 4210-0119 : 3ED 1995 | FIRE FIGHTING CART, POWDER, PG 50, FIRE CLASSIFICATION A, B, C |
| BWB TL 4240-0018 : 3ED 1999 | SHIPS FILTER, SUSPENDED MATTER (600 AND 1200), SHIPS FILTER, GAS (400 AND 600) |
| BWB TL 2540-0048 : 1ED 2005 | FAHRZEUGLEITER FUER FELDKUECHENRUESTSATZ (HANDLAUF, GESCHLOSSEN) TFK 250 |
| BWB TL 6230-0074 : 2ED 2003 | SPOTLIGHT, PORTABLE, FLASH AND LONG-DISTANCE, EXPLOSION-PROOF |
| BWB TL 7310-0030 : 1ED 2005 | DRUCKKOCH-/DRUCKBRATKESSEL, CONTAINERKUECHE ISO 20 FUSZ, ZUCON FELDKUECHENCONTAINER ISO 20 FUSZ, RK |
| BWB TL 7320-0072 : 1ED 2005 | |
| BWB TL 6545-0055 : 3ED 2008 | |
| BWB TL 7360-0022 : 2ED 2004 | BURNER FOR FIELD KITCHEN TRAILER |
| BWB TL 8470-0068 : 4ED 2009 | ARMOR VEST, SPECIAL FORCES, 5 COLOR CAMOUFLAGE PRINT BUNDESWEHR |
| BWB TL 2040-0010 : 4ED 2000 | DRAW BUCKET WITH TAIL |
| BWB TL 4220-0046 : 4ED 2006 | LIFE JACKET, INFLATABLE, WITH INTEGRATED IMMERSION SUIT |
| DIN EN 14035-31:2006-01 | FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
| BWB TL 4240-0065 : 2ED 2006 | FILTER, NON-MAGNETISABLE, FOR CBRN PROTECTIVE MASK M2000 |
| DIN EN 16475-2:2013-08 (Draft) | CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS |
| DIN EN 160201:1998-05 | BLANK DETAIL SPECIFICATION - MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY - CAPABILITY APPROVAL |
| VDE 0212-2 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| BWB TL 8940-0007-001 : 4ED 2007 | DESSERTS - GENERAL CONDITIONS |
| BWB TL 5430-0006 : 5ED 2003 | CONTAINER, COLLAPSIBLE, WITH ACCESSORIES, 1000 L WATER |
| DIN EN 133000 : 1997 | GENERIC SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION |
| VDE 0419-1 : 94 AMD 2 99 | TIME SWITCHES FOR TARIFF AND LOAD CONTROL |
| BWB TL 2040-0014 : 3ED 2000 | GRAPNEL ANCHOR |
| BWB TL 7240-0029 : 3ED 2002 | ABFUELLSTUTZEN, FLEXIBEL FUER 5 L KANISTER UND 20 L EINHEITSKANISTER (STAHL) |
| BWB TL 4240-0040 : 6ED 2001 | 600 M[3]/H SHIP FILTERS, COMPACT OR SEGMENTED VERSION, FOR NBC PROTECTION UNITS |
| BWB TL 2540-0026 : 5ED 2000 | VIBRATION DAMPER FOR MBT LEOPARD 1, ANTI-AIRCRAFT TANK GEPARD, ARMOURED INFANTRY COMBAT VEHICLE MARDER, ARMOURED ANTI-TANK VEHICLES JAGUAR 1 & 2 |
| BWB TL 5120-0011 : 6ED 2008 | ENTRENCHING TOOL |
| BWB TL 4820-0023 : 1ED 2004 | |
| BWB TL 7110-0060 : 3ED 2001 | BRACKET FOR FIELD DESK |
| BWB TL 4240-0061 : 1ED 1996 | SHIP`S FILTER 300, NBC, NATO |
| BWB TL 5120-0018 : 3ED 2000 | CHAIN HOOK |
| BWB TL 8315-0048 : 2ED 2001 | UNIFORM BUTTONS METAL FOR NAVY |
| BWB TL 3655-0016 : 4ED 1999 | TRANSPORT- AND STORAGE CONTAINER FOR LIQUID BREATHING OXYGEN, 2000 L, MOBILE |
| BWB TL 6675-0026 : 3ED 1994 | RANGING POLE, DEMOUNTABLE, IN CONTAINER |
| BWB TL 1730-0020 : 2ED 1999 | CLEANING EQUIPMENT FOR AIRCRAFT OXYGEN SYSTEM |
| BWB TL 6695-0005 : 2ED 1999 | SAMPLER SET FOR GASEOUS OXYGEN |
| BWB TL 8100-0103 : 5ED 2008 | PACKAGING REUSABLE PACKAGES WITH CUSHIONING/RETAINING SYSTEMS |
| BWB TL 8910-0002 : 17ED 2007 | PROCESSED CHEESE |
| BWB TL 8940-0005-001 : 9ED 2007 | PROCESSED FOOD - GENERAL CONDITIONS |
| DIN EN 16264:2014-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| DIN HDBK 225-1 : 4ED 2010 | STATISTIK - ANNAHMESTICHPROBENPRUEFUNG ANHAND VON ALTERNATIVMERKMALEN |
| DIN EN ISO 28765:2016-10 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
| DIN EN 60603-1:1998-07 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
| DIN 28450-1:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 1: SURVEY, DESIGN, TESTING, MARKING |
| DIN EN 14399-9:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| BWB TL 6650-0026 : 2ED 1994 | VISION BLOCK FOR ARMOURED ENGINEER TANK 2 |
| DIN EN 2943:1998-11 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING - TECHNICAL SPECIFICATION |
| DIN EN 3050:1998-07 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION |
| DIN EN 3004:1997-03 | AEROSPACE SERIES - NUTS, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| DIN EN 12654-2:1998-12 | Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998 |
| DIN EN ISO 4074:2016-05 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
| DIN EN 14912:2015-05 | LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders |
| DIN EN 14471:2015-03 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14354:2005-03 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
| DIN EN 12326-1:2014-11 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE |
| DIN EN ISO 4589-2:2016-03 (Draft) | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| DIN EN 1457 : 2003 AMD 20 2007 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14035-25:2006-01 | FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
| DIN 983:2011-04 | Retaining rings with lugs for shafts |
| DIN EN 14035-5:2006-05 | FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
| DIN EN ISO 11833-2:2006-06 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998) |
| DIN EN ISO 11963:2013-03 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| DIN EN 681-4:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements |
| DIN EN 681-3:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber |
| DIN 984:2013-04 | Retaining rings with lugs (internal circlips) for use in bores |
| DIN EN 1457:1999-06 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 681-2:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers |
| DIN EN 61243-2 : 2001 AMD 2 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| VDI 4066 Blatt 4:2016-04 | Hygiene requirements for the production and filling of dairy products without recontamination |
| DIN EN 137100 : 1998 | SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL |
| VDI 3405 Blatt 1:2013-10 | Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control |
| VDI 4066 Blatt 1:2013-05 | Hygienic requirements for the production and aseptically filling of beverage products - Principles and design criteria |
| DIN EN 137101 : 1998 | BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL |
| DIN EN 175200:1996-11 | SECTIONAL SPECIFICATION - CIRCULAR CONNECTORS |
| DIN 7080:2005-05 | Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature |
| DIN EN 60603-2:2006-04 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2.54 MM (0.1 IN) WITH COMMON MOUNTING FEATURES |
| DIN 6799:2017-06 | RETAINING WASHERS FOR SHAFTS |
| BWB TL 3655-0010 : 9ED 2005 | CARBONIC ACID TRANSFER SYSTEM |
| BWB TL 4510-0004 : 2ED 1997 | WATER CATCH BASIN, 2.42 X 1.85 M |
| BWB TL 7360-0031 : 2ED 1998 | FIELD KITCHEN TRAILER, ASSEMBLY |
| BWB TL 5120-0029 : 3ED 2000 | MARLINESPIKE |
| BWB TL 5110-0001 : 5ED 1999 | SAILOR'S KNIFE WITH MARLINESPIKE |
| BWB TL 6605-0001 : 3ED 2000 | HAND LEAD, 3 KG, WITH ROPE, NAVY |
| BWB TL 8470-0004 : 7ED 2004 | COMBAT HELMET, GENERAL-PURPOSE |
| DIN EN 60938-1 : 2008 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| BWB TL 8940-0009 : 1ED 2004 | MEALS READY TO EAT (MRE) IN BAGS MADE OF FLEXIBLE ALUMINIUM COMPOSITE FOIL |
| BWB TL 6920-0033 : 4ED 1994 | |
| DIN EN 61284 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| VDE 0560-811 : 1998 | BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL |
| BWB TL 4240-0058 : 5ED 2004 | BAG FOR INDIVIDUAL NBC PROTECTIVE EQUIPMENT |
| VDE 0557-6 : 2001 | LOW-VOLTAGE POWER SUPPLIES, DC OUTPUT - PART 6: REQUIREMENTS FOR LOW-VOLTAGE POWER SUPPLIES OF ASSESSED PERFORMANCE |
| BWB TL 8905-0001-001 : 12ED 2007 | MEAT PRODUCTS - GENERAL CONDITIONS |
| BWB TL 7320-0064 : 2ED 1999 | FIELD KITCHEN WORK TABLE WITH MOUNTING BRACKET FOR FOOD CONTAINER(S) |
| DIN EN 61854 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| BWB TL 3655-0015 : 4ED 1999 | TRANSPORT- AND STORAGE CONTAINER FOR LIQUID BREATHING OXYGEN, 200 L |
| DIN EN ISO 17668:2016-06 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| BWB TL 8470-0070 : 4ED 2009 | BODY ARMOUR FOR SPECIAL FORCES, BLACK, MODIFIED |
| BWB TL 8455-0115 : 5ED 2000 | PROFICIENCY BADGE, METAL, FOR MARKSMANSHIP LANYARD |
| DIN EN 61897 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| DIN EN ISO 1797-3:2013-06 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
| DIN 17456:1999-02 | SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 8902:1996-02 | PRESSURE RESISTANT CIRCULAR SIGHT GLASSES OF SODA-LIME-GLASS WITHOUT LIMITATION IN THE RANGE OF LOW TEMPERATURE |
| DIN EN 144000:1995-09 | GENERIC SPECIFICATION: DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT THERMISTORS TYPICALLY MADE FROM MODIFIED FERRO-ELECTRIC MATERIALS |
| DIN ISO 9152:2005-11 | AEROSPACE - BOLTS, WITH MJ THREADS, IN TITANIUM ALLOYS, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION |
| DIN EN 13317:2007-02 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY |
| DIN EN 14116:2014-12 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS |
| DIN EN 2583:1997-03 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY, NI-PH 2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| DIN EN 13083:2013-08 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| DIN EN 295-2:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| DIN EN 682:2006-10 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| DIN EN 351-1:2007-10 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| BWB TL 3655-0020 : 3ED 1999 | TRANSPORT- AND STORAGE CONTAINER FOR LIQUID NITROGEN, 200 L |
| BWB TL 4520-0009 : 3ED 2001 | WATER HEATER, 60 L/MIN, 30 DEGREES C, MOBILE |
| BWB TL 4310-0035 : 5ED 2000 | AIR COMPRESSOR, 0.75 M[3]/MIN, 10 BAR OVERPRESSURE ELECTRIC MOTOR, STATIONARY |
| BWB TL 7105-0049 : 6ED 2005 | |
| DIN 51004:1994-06 | THERMAL ANALYSIS - DETERMINATION OF MELTING TEMPERATURES OF CRYSTALLINE MATERIALS BY DIFFERENTIAL THERMAL ANALYSIS |
| DIN EN 16497-1:2015-05 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| VDE 0682-412 : 2001 AMD 1 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| BWB TL 5120-0028 : 3ED 2000 | |
| BWB TL 8455-0004 : 5ED 1999 | COCKADE, METAL |
| BWB TL 6530-0098 : 1ED 2004 | |
| BWB TL 8100-0101 : 4ED 2005 | PACKAGING MATERIAL PROTECTION BY MEANS OF PRESERVATION AND PACKAGING - PACKING LEVEL C - (NATO-4) |
| BWB TL 6230-0063 : 4ED 2007 | |
| BWB TL 8105-0026 : 5ED 2007 | PLASTIC BAG, SLIDE FASTENER |
| VDE 0560-810 : 1998 | SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL |
| BWB TL 2530-0019 : 5ED 2000 | IDLER WHEEL FOR TANK DESTROYERS JAGUAR 1 AND 2, IDLER WHEEL FOR IFV MARDER |
| BWB TL 7310-0013 : 2ED 2001 | PETROLEUM DIESEL COOKER (SINGLE BURNER) |
| BWB TL 7105-0082 : 7ED 2005 | |
| BWB TL 8455-0007 : 8ED 2000 | RANK INSIGNIA, METAL |
| BWB TL 4220-0043 : 5ED 1999 | CONSTANT VOLUME DIVING SUIT, SUITS AND AUXILIARIES |
| BWB TL 6230-0091 : 1ED 2007 | |
| BWB TL 7110-0115 : 1ED 2005 | |
| VDE 0212-1 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| BWB TL 6850-0039 : 2ED 2001 | DECONTAMINATION AGENT A4/IHF |
| BWB TL 1376-0591 : 3ED 2006 | BLACK POWDER - GENERAL CONDITIONS |
| BWB TL 8960-0004 : 1ED 2006 | |
| DIN EN 16261-2:2013-03 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 2: REQUIREMENTS |
| BWB TL 7240-0030 : 2ED 2005 | ADAPTERS FOR MILITARY FUEL CANS |
| BWB TL 7920-0025 : 2ED 1997 | COTTON WASTE |
| BWB TL 7360-0026 : 3ED 2005 | GREASE FLEECE FOR FIELD KITCHEN TRAILER (TFK 250) |
| DIN EN 16263-2:2015-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 2: REQUIREMENTS |
| DIN EN 14035-21:2006-01 | FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| DIN EN 16261-1:2013-02 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 1: TERMINOLOGY |
| BWB TL 5110-0023 : 3ED 1994 | POCKET KNIFE |
| BWB TL 4230-0010 : 3ED 2003 | TRANSPORT BAG FOR CONTAMINATED CLOTHING AND PERSONAL EQUIPMENT |
| DIN EN 16257:2012-12 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA (NOM) |
| DIN EN 1400:2014-07 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 9187-1:2011-01 | Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010) |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| DIN EN ISO 1461:2009-10 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| DIN EN ISO 7823-3:2007-08 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| DIN EN 13953:2015-05 | LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
| DIN EN 13799:2012-06 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| DIN EN ISO 11608-2:2012-12 | Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012) |
| DIN EN ISO 21671:2011-08 | Dentistry - Rotary polishers (ISO 21671:2006 + Amd. 1:2011) |
| BWB TL 8140-0062 : 2ED 1994 | REPAIR OF AMMUNITION CONTAINERS, FIBER MATERIAL, AND AMMUNITION CANS |
| VDE 0435-140 : 1999 | ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING ELECTRICAL RELAYS - INSULATION COORDINATION |
| BWB TL 6510-0047 : 1ED 2006 | |
| VDE 0212-3 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| BWB TL 6230-0080 : 2ED 1997 | TENT ILLUMINATION SET, 230 V, 50 HZ, WATERTIGHT |
| BWB TL 4220-0049 : 2ED 2003 | RETTUNGSSCHWIMMWESTE SPEZIALKRAEFTE MIT SPLITTERSCHUTZ, RETTUNGSSCHWIMMWESTE SPEZIALKRAEFTE MIT SPLITTERSCHUTZ OHNE EINLAGE |
| BWB TL 1320-0041 : 1ED 2006 | |
| DIN 9926:2016-11 | ROUND WIRE SNAP RINGS FOR BORES |
| DIN EN 61038 : 1994 AMD 2 1999 | TIME SWITCHES FOR TARIFF AND LOAD CONTROL |
| BWB TL 6910-0008 : 4ED 2004 | SIMULANT AGENT FOR AGENT SAMPLES |
| BWB TL 7320-0058 : 2ED 1998 | FOLDING TABLE, CRNI STEEL, FOR FIELD KITCHENS |
| BWB TL 8415-0269 : 1ED 2000 | HELMET, PROTOCOL DUTIES |
| BWB TL 1080-0027 : 1ED 2003 | |
| BWB TL 2530-0039 : 6ED 2008 | REPAIR OF ROAD WHEEL FOR MTW M113 AND PZH M109 |
| DIN EN 130300:1999-01 | SECTIONAL SPECIFICATION: ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID AND NON-SOLID ELECTROLYTE |
| BWB TL 3655-0028 : 2ED 1999 | TRANSPORT- AND STORAGE CONTAINER FOR LIQUID NITROGEN, 60 L |
| DIN EN 14035-33:2006-01 | FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
| BWB TL 8400-0007 : 8ED 2004 | FOOTWEAR, HANDWEAR, BAGS AND OTHER ITEMS MADE OF LEATHER OR LEATHER SUBSTITUTES (GENERAL TERMS) |
| DIN EN ISO 1456:2009-12 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
| BWB TL 1080-0003 : 7ED 1999 | SPREADER FOR CAMOUFLAGE NET |
| DIN EN 16497-2:2017-07 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
| BWB TL 6545-0051 : 5ED 2003 | BAG FOR FIRST AID EQUIPMENT |
| BWB TL 4220-0052 : 1ED 2008 | YOKE LIFE PRESERVER |
| BWB TL 4110-0124 : 1ED 2003 | THERMOBEHAELTER, 43 LITER FUER TRSANDST (230 V/24 V) MIT AKTIVER KUEHLUNG |
| BWB TL 8470-0069 : 4ED 2009 | ARMOR VEST, SPECIAL FORCES, 3 COLOR CAMOUFLAGE PRINT BUNDESWEHR |
| BWB TL 4220-0053 : 1ED 2008 | NAVY LIFE PRESERVER, VEST, FOR LAND/SEA USE, MRS-LS |
| DIN EN 14035-20:2005-06 | FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
| DIN EN 61810-5 : 1999 | ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - PART 5: INSULATION COORDINATION |
| DIN EN ISO 18295-1:2016-07 (Draft) | CUSTOMER CONTACT CENTRES - PART 1: REQUIREMENTS FOR CUSTOMER CONTACT CENTRES (ISO 18295-1:2017) |
| DIN ISO 11040-4:2007-10 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| DIN EN 160200-1:1998-05 | SECTIONAL SPECIFICATION - MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY - PART 1: CAPABILITY APPROVAL PROCEDURE |
| DIN EN 13175:2015-02 | LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
| DIN EN 3380:1996-03 | AEROSPACE SERIES - RINGS, RETAINING - TECHNICAL SPECIFICATION |
| DIN EN ISO 12947-4:2007-04 | Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
| DIN EN 15282:2007-06 | VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES |
| DIN EN 14762:2006-05 | Wood flooring - Sampling procedures for evaluation of conformity |
| DIN EN 621:2010-04 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN EN ISO 15747:2012-07 | PLASTIC CONTAINERS FOR INTRAVENOUS INJECTIONS (ISO 15747:2010) |
| DIN ISO 11040-4:2017-07 | Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-4:2015) |
| DIN EN 13003-2:1999-06 | PARA-ARAMID FIBRE FILAMENT YARNS - PART 2: METHODS OF TEST AND GENERAL SPECIFICATIONS |
| DIN EN ISO 6158:2011-10 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES (ISO 6158:2011) |
| DIN EN 14354:2017-11 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.