DIN EN 1452-4:1999-09
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 4: VALVES AND ANCILLARY EQUIPMENT
English
12-01-2013
01-04-2010
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Definitionen, Symbole und Abkürzungen
4 Werkstoff
4.1 Armaturenkörper und Zubehörteile
4.2 Zusätzliche Bauteile
5 Allgemeine Eigenschaften
5.1 Beschaffenheit
5.2 Farbe
5.3 Lichtundurchlässigkeit
6 Geometrische Eigenschaften
6.1 Messung der Masse
6.2 Nenndurchmesser
6.3 Armaturen
6.4 Anbohrarmaturen (Zubehör)
7 Klassifizierung und Betriebsbedingungen
7.1 Klassifizierung
7.2 Berechnung des zulässigen Betriebsdruckes PFA
für Wasser bis 45 grad C
8 Mechanische Eigenschaften
8.1 Innendruckverhalten von Armaturenkörpern
8.2 Verformung durch Quetschen
8.3 Dauerfestigkeit
8.4 Funktionseigenschaften
9 Physikalische Eigenschaften
10 Chemische Eigenschaften
11 Dichtringe
12 Klebstoffe
13 Anforderungen an die Verbindungen und die
Gebrauchstauglichkeit des Rohrleitungs-systems
14 Kennzeichnung
14.1 Allgemeines
14.2 Mindest-Kennzeichnung
14.3 Zusätzliche Kennzeichnung
Anhang A (normativ) Armaturen und Zubehör mit Inch-Massen
Anhang B (informativ) Literaturhinweise
Defines the characteristics of valves and ancillary equipment made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems used in the field of water supply.
| DevelopmentNote |
Supersedes DIN 19532 (10/1999)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN 1452-4 : 2000 | Identical |
| NEN EN 1452-4 : 1999 | Identical |
| NBN EN 1452-4 : 2000 | Identical |
| I.S. EN 1452-4:1999 | Identical |
| NF EN 1452-4 : 1999 | Identical |
| EN 1452-4 : 1999 | Identical |
| NS EN 1452-4 : 1999 | Identical |
| UNE-EN 1452-4:2000 | Identical |
| EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| EN 1452-5 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| ENV 1452-6 : DRAFT 2001 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 6: GUIDANCE FOR INSTALLATION |
| EN 28233:1990 | Thermoplastics valves - Torque - Test method (ISO 8233:1988) |
| ISO 7508:1985 | Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure — Basic dimensions — Metric series |
| ENV 1452-7:2000 | Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
| EN 802:1994 | Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing |
| EN 763 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING |
| EN 578 : 1993 | PLASTICS PIPING SYSTEMS - PLASTICS PIPES AND FITTINGS - DETERMINATION OF THE OPACITY |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation |
| ISO 2536:1974 | Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series — Dimensions of flanges |
| EN 921:1994/AC:1995 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE |
| EN 28659:1990 | Thermoplastics valves - Fatigue strength - Test method (ISO 8659:1989) |
| ISO 5752:1982 | Metal valves for use in flanged pipe systems — Face-to-face and centre-to-face dimensions |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| EN 917:1997 | Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness |
| EN 1452-1 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| EN 1452-2 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| EN 12107 : 1997 | PLASTICS PIPING SYSTEM - INJECTION MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS |
| ISO/TR 9080:1992 | Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials |
| EN 1452-3 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: FITTINGS |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.