VDI 4464:2012-05
Current
Current
The latest, up-to-date edition.
Operation of industrial trucks with RFID components
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-05-2012
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Components of an RFID-enabled industrial
truck system
5 Sending position requests to
RFID transponders
6 Requirements on the components mounted
on the industrial truck
7 Test method and evaluation criteria
Annex
Bibliography
Defines basic requirements for RFID components, industrial trucks, and interfaces and defines requirements for the use of RFID components on industrial trucks to read from and write to transponders on load carriers and storage locations used in intralogistic transport processes.
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 4489 Blatt 1:2015-06 (Draft) | Labelling of pallets with Auto-ID elements - Returnable wooden pallets of Euro measure (800 mm x 1200 mm) |
| DIN EN 300220-3:2001-03 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT TO BE USED IN THE 25 MHZ TO 1000 MHZ FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500 MW - PART 3: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| DIN EN 12895 : 2015 | INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| VDI 3578:2008-09 | Attachment for forklift trucks (load lifting appliance) |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| DIN EN 300220-1:2017-05 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ - PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
| ISO/IEC 18000-6:2013 | Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| DIN EN 60068-2-6 : 1996 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| DIN EN 50364 : 2010 | LIMITATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM DEVICES OPERATING IN THE FREQUENCY RANGE 0 HZ TO 300 GHZ, USED IN ELECTRONIC ARTICLE SURVEILLANCE (EAS), RADIO FREQUENCY IDENTIFICATION (RFID) AND SIMILAR APPLICATIONS |
| VDE 0805 : 2001 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| EN 300 220-3 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT TO BE USED IN THE 25 MHZ TO 1 000 MHZ FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500 MW; PART 3: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| DIN EN 60204-1 : 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| VDE 0848-364 : 2010 | BEGRENZUNG DER EXPOSITION VON PERSONEN GEGENUEBER ELEKTROMAGNETISCHEN FELDERN VON GERAETEN, DIE IM FREQUENZBEREICH VON 0 HZ BIS 300 GHZ BETRIEBEN UND IN DER ELEKTRONISCHEN ARTIKELUEBERWACHUNG (EN: EAS), HOCHFREQUENZ-IDENTIFIZIERUNG (EN: RFID) UND AEHNLICHEN ANWENDUNGEN VERWENDET WERDEN |
| ISO 11898-2:2016 | Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit |
| VDI/AIM 4472 Blatt 10:2008-05 | Requirements to be met by transponder systems for use in the supply chain - Test methods to check the performance of transponder systems (RFID) |
| DIN EN 60068-2-27 : 1995 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| DIN EN 302208-2:2015-06 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W - PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| ISO/IEC 18046-1:2011 | Information technology — Radio frequency identification device performance test methods — Part 1: Test methods for system performance |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| VDE 0468-2-6 : 2008 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 2328:2011 | Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions |
| DIN EN 60068-2-29:1995-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS; TEST EB AND GUIDANCE: BUMP |
| VDE 0468-2-27 : 2010 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| EN 60068-2-29:1993 | Environmental testing - Part 2: Tests - Test Eb and guidance: Bump |
| DIN EN 60529 : 2014-09 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529:1989 + A1:1999 + A2:2013) |
| VDE 0113-1 : 2007 COR 1 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| ISO/IEC 18046-2:2011 | Information technology Radio frequency identification device performance test methods Part 2: Test methods for interrogator performance |
| IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
| ISO/IEC 18046-3:2012 | Information technology Radio frequency identification device performance test methods Part 3: Test methods for tag performance |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| DIN EN 300220-2:2017-05 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ - PART 2: HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU FOR NON SPECIFIC RADIO EQUIPMENT |
| EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
| DIN EN 302208-1:2015-06 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W - PART 1: TECHNICAL REQUIREMENTS AND METHODS OF MEASUREMENT |
| EN 302 208-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 1: TECHNICAL REQUIREMENTS AND METHODS OF MEASUREMENT |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.