VDI 3986:2014-07
Current
Current
The latest, up-to-date edition.
Determination of efficiencies of conventional power stations
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-07-2014
Publisher
$266.34
Including GST where applicable
Preliminary note
1 Scope
2 Terms and definitions
3 Symbols and indices
4 Definition of efficiency
5 Reference conditions, prerequisites,
test conditions
6 Measurements to ascertain efficiency
7 Conversion to reference conditions
8 Measuring uncertainties
Bibliography
The efficiency of a power plant is a measure of how well it converts heat into electricity.
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 4608 Blatt 2:2008-07 | Energy systems - Combined heat and power - Allocation and evaluation |
| VDI 4608 Blatt 1:2005-03 | Energy systems - Combined heat and power - Terms, definitions, examples |
| VDI 2055-3 : 2011 COR 2012 | THERMAL INSULATION OF HEATED AND REFRIGERATED OPERATIONAL INSTALLATIONS IN THE INDUSTRY AND THE BUILDING SERVICES - TECHNICAL BASICS FOR THE VERIFICATION OF THERMOTECHNICAL PROPERTIES OF INSULATION SYSTEMS, DETERMINATION OF TOTAL HEAT LOSSES |
| VDI 3925 Blatt 1:2016-09 | Methods for evaluation of waste treatment processes |
| VDI 4660 Blatt 2:2017-04 | Calculation of emissions related to target energy for energy conversion |
| VDI 4660 Blatt 1:2013-11 | Conversion factors for specific emissions from energy-conversion systems |
| VDI 3460 Blatt 2:2014-06 | Emission control - Thermal waste treatment - Energy conversion |
| VDI 2048 Blatt 3:2012-05 | Uncertainties of measurement during acceptance tests on energy-conversion and power plants - Examples, especially preparation of acceptance tests of a gas and steam power plant |
| VDI 4675 Blatt 1:2012-09 | Balance-based averaging of inhomogeneous flow fields - Introduction |
| VDI 3986 Blatt 1:2017-01 (Draft) | Determination of the efficiency of power plants with CO-separation from flue gas |
| VDI 4661:2014-08 | Energetic characteristics - Fundamentals - Methodology |
| VDI/VDE 3511 Blatt 1:1996-03 | Temperature measurement in industry - Principles and special methods of temperature measurement |
| DIN 4325:1971-10 | FIELD ACCEPTANCE TESTS OF STORAGE PUMPS |
| DIN 51612:1980-06 | TESTING OF LIQUEFIED PETROLEUM GASES; CALCULATION OF NET CALORIFIC VALUE |
| DIN 4341-2:1986-03 | GAS TURBINES; ACCEPTANCE TESTS; EXAMPLES FOR EVALUATION |
| DIN 1943:1975-02 | THERMAL ACCEPTANCE TESTS OF STEAM TURBINES |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| VDI/VDE 2184:2008-06 | Reliable operation and maintenance of field bus systems |
| VDI/VDE 2040 Blatt 4:1996-09 (Draft) | Calculation principles for the measurement of fluid flow using orifice plates, nozzles and venturi tubes - Fluid properties |
| EN 29104:1993 | Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991) |
| EN 14705:2005 | Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers |
| VDI/VDE 2040 Blatt 1:1991-01 | Calculation principles for the measurement of fluid flow - Using orifice plates, nozzles and venturi tubes - Deviations and supplements to DIN 1952 |
| VDI/VDE 2040 Blatt 2:1987-04 | Calculation principles for measurement of fluid flow using orifice plates, nozzles and venturi tubes; equations and formulae |
| DIN EN ISO 6976:2015-06 (Draft) | NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016) |
| VDI 2448 Blatt 2:1997-07 | Statistical evaluation of random-sample measurements of stationary source emissions: Determination of the upper confidence limit |
| DIN 19216:1995-08 | FLOW MEASUREMENT - MOUNTING ARRANGEMENTS FOR FLOW MEASURING DEVICES ACCORDING TO THE DIFFERENTIAL PRESSURE METHOD |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements |
| VDI/VDE 3519 Blatt 1:2002-10 | Level measurement of liquids and solids (bulk solids) |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| VDI/VDE 2040 Blatt 5:1989-03 | Calculation principles for the measurement of fluid flow using orifice plates, nozzles and venturi tubes; uncertainties |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| IEC 60953-2:1990 | Rules for steam turbine thermal acceptance tests. Part 2: Method B - Wide range of accuracy for various types and sizes of turbines |
| VDI/VDE 2040 Blatt 3:1990-05 | Calculation principles for measurement of fluid flow using orifice plates, nozzles and venturi tubes - Examples of calculations |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| VDI 2048 Blatt 1:2000-10 | Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals |
| DIN 51701-3:2006-09 | TESTING OF SOLID FUELS - SAMPLING AND SAMPLE PREPARATION - PART 3: SAMPLE PREPARATION |
| DIN 51853:2011-12 | Testing of fuel gases - Sampling |
| DIN 4342:1979-12 | GAS TURBINES - STANDARD REFERENCE CONDITIONS, STANDARD POWER AND PERFORMANCE DATA |
| DIN 51701-4:2006-09 | TESTING OF SOLID FUELS - SAMPLING AND SAMPLE PREPARATION - PART 4: EQUIPMENT |
| DIN 16160:1990-11 | THERMOMETERS - CONCEPTS |
| VDI 4660 Blatt 1:2013-11 | Conversion factors for specific emissions from energy-conversion systems |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| VDI 2066 Blatt 1:1975-10 | Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
| EN ISO 12213-2:2009 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
| ISO 12213-2:2006 | Natural gas — Calculation of compression factor — Part 2: Calculation using molar-composition analysis |
| DIN EN ISO 12213-2:2010-01 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
| ISO 9104:1991 | Measurement of fluid flow in closed conduits — Methods of evaluating the performance of electromagnetic flow-meters for liquids |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| DIN 51701-2:2006-09 | TESTING OF SOLID FUELS - SAMPLING AND SAMPLE PREPARATION - PART 2: SAMPLING |
| VDI/VDE 3511 Blatt 5:1994-11 | TEMPERATURE MEASUREMENT IN INDUSTRY - INSTALLATION OF THERMOMETERS |
| DIN EN ISO 5167-1:2004-01 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| DIN 19200:1989-01 | METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOWMETER (EMF) FOR LIQUIDS IN CLOSED CONDUITS |
| IEC 60770-1:2010 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.