VDI 3762:2012-01
Current
Current
The latest, up-to-date edition.
Sound insulation by means of raised access floors and hollow floors
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-01-2012
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Preliminary Note
Introduction
1. Scope
2. Normative references
3. Terms and definitions
4. Requirements
5. Influences on flanking and impact sound
insulation and other acoustical parameters
6. Measurement methods
7. Recommendations regarding acoustically
optimal planning and realization
Annex - Acoustical properties of commonly available designs
Glossary
Bibliography
The document describes the main acoustic influences of raised and hollow floors, which are important for the dimensioning and perfect construction.
| DocumentType |
Standard
|
| Pages |
46
|
| ProductNote |
This standard also refers to VDI 3755:2000-02.
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 2081 Blatt 1:2001-07 | Noise generation and noise reduction in air-conditioning systems |
| DIN 4109-34:2016-07 | SOUND INSULATION IN BUILDINGS - PART 34: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - ADDITIONAL LAYERS FIXED TO SOLID STRUCTURAL ELEMENTS |
| DIN EN ISO 717-1:2013-06 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2013) |
| DIN EN ISO 10140-1:2010-12 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016) |
| DIN EN ISO 140-12:2000-03 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| DIN 45641:1990-06 | AVERAGING OF SOUND LEVELS |
| ISO/R 717:1968 | Withdrawal of ISO/R 717-1968 |
| ISO 15186-2:2003 | Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 2: Field measurements |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
| ISO 140-7:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors |
| DIN EN 12825:2002-04 | RAISED ACCESS FLOORS |
| ISO 10140-1:2016 | Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
| DIN 18041:2004-05 | ACOUSTIC QUALITY IN ROOMS - SPECIFICATIONS AND INSTRUCTIONS FOR THE ROOM ACOUSTIC DESIGN |
| EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| EN ISO 140-12 : 2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| ISO 140-11:2005 | Acoustics Measurement of sound insulation in buildings and of building elements Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| EN ISO 15186-2:2010 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements (ISO 15186-2:2003) |
| EN 12354-1:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
| EN ISO 10848-4:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 4: Application to junctions with at least one Type A element (ISO 10848-4:2017) |
| DIN EN 13213:2001-12 | HOLLOW FLOORS |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| VDI 4100:2012-10 | Sound insulation between rooms in buildings - Dwellings - Assessment and proposals for enhanced sound insulation between rooms |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN ISO 10848-1:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017) |
| DIN EN ISO 15186-2:2010-12 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements (ISO 15186-2:2003) |
| DIN EN ISO 10848-2:2006-08 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 2: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SMALL INFLUENCE (ISO 10848-2:2017) |
| DIN EN 12354-1:2000-12 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF PRODUCTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS |
| ISO 140-4:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms |
| DIN EN ISO 717-2:2013-06 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
| DIN EN ISO 11654:1997-07 | ACOUSTICS - SOUND ABSORBERS FOR USE IN BUILDINGS - RATING OF SOUND ABSORPTION |
| EN 20140-2:1993 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 2: Determination, verification and application of precision data (ISO 140-2:1991) |
| DIN EN ISO 140-11:2005-08 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS |
| EN ISO 140-11:2005 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005) |
| DIN 1320:2009-12 | ACOUSTICS - TERMINOLOGY |
| DIN 4109-1:2016-07 | SOUND INSULATION IN BUILDINGS - PART 1: MINIMUM REQUIREMENTS |
| EN ISO 10848-3:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017) |
| ISO 10848-4:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 4: Application to junctions with at least one Type A element |
| DIN EN 12354-2:2000-09 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS |
| EN ISO 140-7:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998) |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| EN 12354-2:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
| VDI 2569:1990-01 | Sound protection and acoustical design in offices |
| EN ISO 140-4:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998) |
| EN ISO 10848-2:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.