VDI 3498 Blatt 2:2002-07
Current
Current
The latest, up-to-date edition.
Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using small filters
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-07-2002
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Preliminary note
Introduction
1 Scope
2 Principle of method
3 Apparatus and materials
4 Sampling
5 Analysis
6 Identification and qualification
7 Performance characteristics
8 Interferences
9 Comparison measurements
Annex A - Structures of PCDDs and PCDFs
Annex B - Calculation of toxic equivalents
Bibliography
The guideline in this guideline standardized measurement method is used to determine the PCDD/F in outdoor and indoor air.
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| DIN ISO 12219-5:2014-10 | INTERIOR AIR OF ROAD VEHICLES - PART 5: SCREENING METHOD FOR THE DETERMINATION OF THE EMISSIONS OF VOLATILE ORGANIC COMPOUNDS FROM VEHICLE INTERIOR PARTS AND MATERIALS - STATIC CHAMBER METHOD (ISO 12219-5:2014) |
| VDI 3957 Blatt 2:2016-03 | Biological measuring techniques for the determination and assessment of effects of air pollutants on plants (biomonitoring) - Method of the standardised grass exposure |
| DIN ISO 12219-4:2013-12 | INTERIOR AIR OF ROAD VEHICLES - PART 4: METHOD FOR THE DETERMINATION OF THE EMISSIONS OF VOLATILE ORGANIC COMPOUNDS FROM VEHICLE INTERIOR PARTS AND MATERIALS - SMALL CHAMBER METHOD (ISO 12219-4:2013) |
| VDI 4300 Blatt 2:1997-12 | Indoor-air pollution measurement - Measurement strategy for polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated bibhenyle (PCBs) |
| DIN ISO 16000-13:2010-03 | Indoor air - Part 13: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) - Collection on sorbent-backed filters (ISO 16000-13:2008) |
| DIN ISO 16000-20:2015-11 | INDOOR AIR - PART 20: DETECTION AND ENUMERATION OF MOULDS - DETERMINATION OF TOTAL SPORE COUNT (ISO 16000-20:2014) |
| DIN ISO 12219-6:2015-04 (Draft) | INTERIOR AIR OF ROAD VEHICLES - PART 6: METHOD FOR THE DETERMINATION OF THE EMISSIONS OF SEMI-VOLATILE ORGANIC COMPOUNDS FROM VEHICLE INTERIOR PARTS AND MATERIALS AT HIGHER TEMPERATURE - SMALL CHAMBER METHOD (ISO 12219-6:2017) |
| DIN EN 1948-2:2006-06 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs |
| DIN EN ISO 16000-12:2008-08 | INDOOR AIR - PART 12: SAMPLING STRATEGY FOR POLYCHLORINATED BIPHENYLS (PCBS), POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS), POLYCHLORINATED DIBENZOFURANS (PCDFS) AND POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) |
| DIN EN 1948-1:2006-06 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs |
| DIN EN ISO 16000-1:2006-06 | Indoor air - Part 1: General aspects of sampling strategy (ISO 16000-1:2004) |
| VDI 4300 Blatt 9:2005-08 | Measurement of indoor air pollution - Measurement strategy for carbon dioxide (CO) |
| DIN EN ISO 16000-32:2014-10 | INDOOR AIR - PART 32: INVESTIGATION OF BUILDINGS FOR THE OCCURRENCE OF POLLUTANTS (ISO 16000-32:2014) |
| DIN EN ISO 16000-26:2012-11 | Indoor air - Part 26: Sampling strategy for carbon dioxide (CO<(Index)2>) (ISO 16000-26:2012); German version EN ISO 16000-26:2012 |
| DIN ISO 16000-18:2012-01 | Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011 + Cor.1:2011) |
| DIN EN ISO 16000-19:2014-12 | Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012) |
| ISO 16000-14:2009 | Indoor air — Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) — Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry |
| DIN EN 12341:1999-03 | AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[10] OR PM[2],[5] MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| DIN ISO 16000-17:2010-06 | Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method (ISO 16000-17:2008) |
| DIN EN 1948-3:2006-06 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs |
| DIN EN ISO 16000-9:2008-04 | Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006) |
| DIN ISO 12219-3:2013-12 | Interior air of road vehicles - Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method (ISO 12219-3:2012) |
| VDI 3498 Blatt 1:2002-07 | Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using large filters |
| DIN EN 1948-4:2014-03 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS |
| DIN ISO 16000-31:2014-09 | INDOOR AIR - PART 31: MEASUREMENT OF FLAME RETARDANTS AND PLASTICIZERS BASED ON ORGANOPHOSPHORUS COMPOUNDS - PHOSPHORIC ACID ESTER (ISO 16000-31:2014) |
| DIN EN ISO 16000-2:2006-06 | Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004) |
| DIN ISO 16000-29:2015-02 | INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS (ISO 16000-29:2014) |
| VDI 2463 Blatt 7:2014-05 | Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS) |
| DIN ISO 12219-2:2012-11 | Interior air of road vehicles - Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method (ISO 12219-2:2012) |
| DIN ISO 16000-33:2015-07 (Draft) | INDOOR AIR - PART 33: DETERMINATION OF PHTHALATES WITH GAS CHROMATOGRAPHY/MASS SPECTROMETRY (GC/MS) (ISO 16000-33:2017) |
| ISO 16000-13:2008 | Indoor air — Part 13: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) — Collection on sorbent-backed filters |
| DIN ISO 16000-33:2017-12 | INDOOR AIR - PART 33: DETERMINATION OF PHTHALATES WITH GAS CHROMATOGRAPHY/MASS SPECTROMETRY (GC/MS) (ISO 16000-33:2017) |
| DIN ISO 16000-27:2014-11 | INDOOR AIR - PART 27: DETERMINATION OF SETTLED FIBROUS DUST ON SURFACES BY SEM (SCANNING ELECTRON MICROSCOPY) (DIRECT METHOD) (ISO 16000-27:2014) |
| VDI 2464 Blatt 3:2012-07 | Ambient air measurement - Indoor air measurement - Measurement of polybrominated diphenylether, hexabromocyclododecane and hexabromobenzene by GC/MS |
| DIN EN 12341:2014-08 | Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter |
| DIN ISO 16000-24:2013-01 | INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUND (EXCEPT FORMALDEHYDE) CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS (ISO 16000-24:2009) |
| DIN ISO 12219-1:2013-12 | Interior air of road vehicles - Part 1: Whole vehicle test chamber - Specification and method for the determination of volatile organic compounds in cabin interiors (ISO 12219-1:2012) |
| DIN ISO 16000-6:2012-11 | Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA? sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011) |
| DIN ISO 16000-25:2012-01 | Indoor air - Part 25: Determination of the emission of semi-volatile organic compounds by building products - Micro-chamber method (ISO 16000-25:2011) |
| VDI 4301 Blatt 6:2012-09 | Measurement of indoor air pollution - Measurement of phthalates with GC/MS |
| DIN ISO 16000-28:2012-12 | Indoor air - Part 28: Determination of odour emissions from building products using test chambers (ISO 16000-28:2012) |
| DIN ISO 16000-4:2012-11 | INDOOR AIR - PART 4: DETERMINATION OF FORMALDEHYDE - DIFFUSIVE SAMPLING METHOD (ISO 16000-4:2011) |
| DIN EN ISO 16000-15:2009-04 | INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2]) |
| BS ISO 16000-14:2009 | Indoor air Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs). Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry |
| BS ISO 16000-13:2008 | Indoor air Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs). Collection on sorbent-backed filters |
| DIN ISO 16000-3:2013-01 | Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011) |
| DIN ISO 16000-8:2008-12 | INDOOR AIR - PART 8: DETERMINATION OF LOCAL MEAN AGES OF AIR IN BUILDINGS FOR CHARACTERIZING VENTILATION CONDITIONS |
| DIN ISO 12219-7:2016-02 (Draft) | INTERIOR AIR OF ROAD VEHICLES - PART 7: ODOUR DETERMINATION IN INTERIOR AIR OF ROAD VEHICLES AND TEST CHAMBER AIR OF TRIM COMPONENTS BY OLFACTORY MEASUREMENTS (ISO 12219-7:2017) |
| DIN ISO 16000-30:2015-05 | INDOOR AIR - PART 30: SENSORY TESTING OF INDOOR AIR (ISO 16000-30:2014) |
| DIN ISO 16000-16:2009-12 | Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration (ISO 16000-16:2008) |
| DIN ISO 16000-14:2012-03 | Indoor air - Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) - Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry (ISO 16000-14:2009) |
| DIN ISO 16000-19:2012-12 | INDOOR AIR - PART 19: SAMPLING STRATEGY FOR MOULDS (ISO 16000-19:2012) |
| VDI 4300 Blatt 1:1995-12 | Indoor-air pollution measurement - General aspects of measurement strategy |
| VDI 2449 Blatt 1:1995-02 | Measurement methods test criteria - Determination of performance characteristics for the measurement of gaseous pollutants (immission) |
| VDI 4300 Blatt 2:1997-12 | Indoor-air pollution measurement - Measurement strategy for polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated bibhenyle (PCBs) |
| EN 1948-2:2006 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs |
| ZH 1/120.47 : 1997 | VON DEN BERUFSGENOSSENSCHAFTEN ANERKANNTE ANALYSENVERFAHREN ZUR FESTSTELLUNG DER KONZENTRATIONEN KREBSERZEUGENDER ARBEITSSTOFFE IN DER LUFT IN ARBEITSBEREICHEN - VERFAHREN ZUR BESTIMMUNG VON 2,3,7,8-SUBSTITUIERTEN POLYCHLORIERTEN DIBENZODIOXINEN (PCDD) UND DIBENZOFURANEN (PCDF) |
| VDI 2463 Blatt 7:2014-05 | Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS) |
| EN 1948-1:2006 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs |
| EN 1948-3:2006 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs |
| BGR 120 : 1998 | |
| VDI 3498 Blatt 1:2002-07 | Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using large filters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.