VDI 3475 Blatt 2:2005-12
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a
Hardcopy , PDF
04-04-2019
German - English
01-12-2005
Preliminary note
Introduction
Objective
Scope
1 Aerobic processes
2 Anaerobic processes
3 Prevention, generation and reduction of
emissions and ambient air impacts
4 Instructions for emission monitoring
Annex A - Mean values in olfactometry
Annex B - Spreading techniques for liquid and
solid secondary bio-fertilizers
(secondary bio-fertilizers; composts
and co-digestates)
Annex C - Licensing classification of
composting and biogas facilities
Bibliography
Defines biological waste treatment Facilities designed for a maximum throughput capacity of approx. 6000 Mg/h.
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
VDI 3475 Blatt 4:2010-08 | Emission control - Agricultural biogas facilities - Digestion of energy crops and manure |
VDI 3674:2013-04 | Waste gas cleaning by adsorption - Process gas and waste gas cleaning |
VDI 3925 Blatt 1:2016-09 | Methods for evaluation of waste treatment processes |
VDI 4631:2011-02 | Quality criteria for biogas plants |
VDI 2596:2009-02 | Emission control - Slaughtering facilities |
VDI 3459 Blatt 4:2016-09 (Draft) | Terminology of waste treatment and energy management - Biological treatment |
VDI 3475 Blatt 5:2015-10 | Emission control - Biological waste treatment facilities - Anaerobic digestion and post-treatment |
VDI 3883 Blatt 1:2015-09 | Effects and assessment of odours - Assessment of odour annoyance - Questionnaires |
VDI 2448 Blatt 1:1992-04 | Planning of spot sampling measurements of stationary source emissions |
ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
DIN 2403:2014-06 | IDENTIFICATION OF PIPELINES ACCORDING TO THE FLUID CONVEYED |
DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
VDI 2066-3 : 1986 | MEASUREMENT OF PARTICULATE MATTER - MANUAL DUST MEASUREMENT IN FLOWING GASES - GRAVIMETRIC DETERMINATION OF DUST LOAD - TUBULAR FILTER DEVICE (40 M[3]/H) |
VDI 4252 Blatt 2:2004-06 | Measurement of airborne microorganisms and viruses in ambient air - Active sampling of bioaerosols - Separation of airborne mould on gelatine/polycarbonate filters |
DIN ISO 9169:1996-08 | AIR QUALITY - DETERMINATION OF PERFORMANCE CHARACTERISTICS OF MEASUREMENT METHODS |
VDI 3475 Blatt 1:2003-01 | Emission control - Biological waste treatment facilities - Composting and anaerobic digestion; Plant capacities more than approx. 6000 Mg/a |
DIN 11832-1:1990-11 | FARM AND LIVESTOCK HUSBANDRY EQUIPMENT; SHUT-OFF VALVES FOR SLURRY PIPES; GATE VALVES FOR STATIC PRESSURE OF MAX. 1 BAR |
DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
VDI 4251-1 : 2007 COR 2 2016 | MEASUREMENT OF AIRBORNE MICROORGANISMS AND VIRUSES IN AMBIENT AIR - PLANNING OF PLANT-RELATED AMBIENT AIR MEASUREMENTS - PLUME MEASUREMENT |
DIN 1045-1:2008-08 | CONCRETE, REINFORCED AND PRESTRESSED CONCRETE STRUCTURES - PART 1: DESIGN AND CONSTRUCTION |
BGR 104 : 2014 | |
ATV M 702 : 1995 | WIRTSCHAFTSDUENGER, ABFAELLE UND ABWAESSER AUS LANDWIRTSCHAFTLICHEN BETRIEBEN |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 6879:1995 | Air quality — Performance characteristics and related concepts for air quality measuring methods |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO 9001:2015 | Quality management systems — Requirements |
DIN 8074:2011-12 | Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English |
DIN EN ISO 9001:2015-11 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
VDI 4200:2000-12 | Realization of stationary source emission measurements |
VDI 3477:2016-03 | Biological waste gas purification - Biofilters |
VDI 3478:1996-07 | Biological waste gas purification - Bioscrubbers and trickle bed reactors |
DIN EN 13725:2003-07 | Air quality - Determination of odour concentration by dynamic olfactometry |
VDI 4253 Blatt 2:2004-06 | Measurement of airborne microorganisms and viruses in ambient air - Culture based method for the determination of the concentration of mould in air - Indirect method after sampling with gelatine/polycarbonate filters |
DIN ISO 6879:1996-12 | AIR QUALITY, PERFORMANCE CHARACTERISTICS AND RELATED CONCEPTS FOR AIR QUALITY MEASURING METHODS |
VDI 4255-1 : 2005 COR 2016 | BIOAEROSOLS AND BIOLOGICAL AGENTS - SOURCES OF EMISSIONS AND CONTROL MEASURES - OVERVIEW |
VDI 2450 Blatt 1:1977-09 | Measurement of air pollutant emission, transmission, and immission; definitions and glossary of terms |
VDI 2450 Blatt 2:1977-09 (Draft) | Measurement of air pollutant emission, transmission, and immission; measurement design; fundamentals |
VDI 2066-7 : 1990 | MEASUREMENT OF PARTICULATE MATTER; MANUAL DUST MEASUREMENT IN FLOWING GASES; GRAVIMETRIC DETERMINATION OF LOW DUST LOAD; PLANE FILTER DEVICES |
ISO 9169:2006 | Air quality Definition and determination of performance characteristics of an automatic measuring system |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.