VDI 2511:2010-02
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Industrial trucks - Regular checking, minimum requirements
Available format(s)
Hardcopy , PDF
Superseded date
05-04-2022
Superseded by
Language(s)
German - English
Published date
01-02-2010
Publisher
Preliminary note
Introduction
1. Scope
2. Inspection authorisation
3. Competent persons
4. Inspection report
5. Inspection schedules
6. Liability
7. Inspection process
Annex A - Choice of analyzing and measuring
equipment, tools and appliances
Annex B - Inspection report
Annex C - Retardation for powered industrial
Trucks
Annex D - Minimum effect of parking brake
according to ISO 6292
Annex E - Braking distances for industrial
trucks with nominal load
Annex F - Braking distances for unloaded
industrial trucks
Annex G - Explanations
Bibliography
Pertains to industrial including the trailers pulled by them. Industrial trucks of a special type or with a special equipment are subject to additional regulations.
| DevelopmentNote |
DRAFT 2017 issued in January 2017. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| VDI 4068 Blatt 5:2011-06 | Competent Persons - Industrial trucks, attachments, trailers |
| VDI 3568:2012-10 | Measure and equipment for the maintenance of industrial trucks |
| VDI 3577:2009-02 | Industrial trucks for high-bay warehouses - Specification and operating conditions |
| EN 1551:2000 | Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity |
| ISO 611:2003 | Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary |
| DIN EN ISO 3691-2:2016-10 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS (ISO 3691-2:2016) |
| EN 1526:1997+A1:2008 | Safety of industrial trucks - Additional requirements for automated functions on trucks |
| BGV D 34 : 1997 | |
| ISO 5057:1993 | Industrial trucks — Inspection and repair of fork arms in service on fork-lift trucks |
| EN 1726-2:2000 | Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| DIN EN 15000:2009-06 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
| EN 1525:1997 | Safety of industrial trucks - Driverless trucks and their systems |
| BGV D 29 : 2000 | |
| DIN EN 1551:2001-01 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED TRUCKS OVER 10000 KG CAPACITY |
| BGG 939 : 1996 | TEST BOOK FOR POWER-DRIVEN INDUSTRIAL TRUCKS |
| EN 1757-1 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS |
| EN 1757-2 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS |
| BGV D 6 : 2000 | CRANES |
| DIN EN 1175-3 : 2011 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| DIN 15170:1987-03 | Industrial trucks; trailer couplings; connecting dimensions, requirements, testing |
| BGR 123 : 2005 | |
| DIN EN 1757-1:2002-03 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| DIN EN ISO 3691-5:2014-07 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: PEDESTRIAN-PROPELLED TRUCKS (ISO 3691-5:2014) |
| DIN EN 1757-2:2002-03 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS |
| DIN EN 1175-1 : 2011 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| BGV D 27 : 1997 | INDUSTRIAL TRUCKS |
| DIN EN 1175-2 : 2011 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| DIN EN 1525:1997-12 | SAFETY OF INDUSTRIAL TRUCKS - DRIVERLESS TRUCKS AND THEIR SYSTEMS |
| DIN EN 1757-3:2003-07 | Safety of industrial trucks - Pedestrian propelled manual and semi-manual trucks - Part 3: Platform trucks |
| EN 1175-2:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
| EN 1755:2015 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| EN 1757-4 : 2003 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS |
| DIN EN ISO 3691-4:2006-05 (Draft) | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 4: DRIVERLESS INDUSTRIAL TRUCKS AND THEIR SYSTEMS |
| BGR 104 : 2014 | |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| DIN ISO 2331:1983-04 | FORK LIFT TRUCKS, HOOK ON TYPE FORK ARMS; VOCABULARY |
| DIN EN 1726-2:2001-02 | SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10000 KG CAPACITY AND TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20000 N - PART 2: ADDITIONAL REQUIREMENTS FOR TRUCKS WITH ELEVATING OPERATOR POSITION AND TRUCKS SPECIFICALLY DESIGNED TO TRAVEL WITH ELEVATED LOADS |
| EN 1757-3:2002 | Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks |
| DIN 15185-1:1991-08 | Warehousesystems with guided industrial trucks; requirements on the ground, the warehouse and other requirements |
| DIN EN ISO 3691-1:2015-12 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS (ISO 3691-1:2011, INCLUDING COR 1:2013) |
| ISO 2328:2011 | Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions |
| VDE 0117-1 : 2011 | SICHERHEIT VON FLURFOERDERZEUGEN - ELEKTRISCHE ANFORDERUNGEN - TEIL 1: ALLGEMEINE ANFORDERUNGEN FUER FLURFOERDERZEUGE MIT BATTERIEELEKTRISCHEM ANTRIEB |
| DIN EN ISO 3691-6:2014-06 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: BURDEN AND PERSONNEL CARRIERS (ISO 3691-6:2013) |
| DIN 15185-2:2013-10 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENT - PART 2: USE IN NARROW AISLES |
| ISO 6292:2008 | Powered industrial trucks and tractors Brake performance and component strength |
| DIN EN ISO 3691-3:2010-02 (Draft) | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: ADDITIONAL REQUIREMENTS FOR TRUCKS WITH ELEVATING OPERATOR POSITION AND TRUCKS SPECIFICALLY DESIGNED TO TRAVEL WITH ELEVATED LOADS (ISO 3691-3:2016) |
| ISO 2330:2002 | Fork-lift trucks — Fork arms — Technical characteristics and testing |
| ZH 1/455 : 1978 | |
| BGR 500 : SEP 2008 | |
| DIN EN 1757-4:2003-11 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS |
| VDE 0117-2 : 2011 | SICHERHEIT VON FLURFOERDERZEUGEN - ELEKTRISCHE ANFORDERUNGEN - TEIL 2: ALLGEMEINE ANFORDERUNGEN FUER FLURFOERDERZEUGE MIT VERBRENNUNGSMOTOREN |
| VDE 0117-3 : 2011 | SICHERHEIT VON FLURFOERDERZEUGEN - ELEKTRISCHE ANFORDERUNGEN - TEIL 3: BESONDERE ANFORDERUNGEN FUER ELEKTRISCHE KRAFTUEBERTRAGUNGSSYSTEME VON FLURFOERDERZEUGEN MIT VERBRENNUNGSMOTOREN |
| EN 15000:2008 | Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
| DIN EN 1726-1 : 1999 AMD 1 2004 | SAFETY OF INDUSTRIAL TRUCKS - PART 1: SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20000 N |
| TRGS 554 : 2008 COR 2009 | |
| EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| BGV A 1 : 2008 | |
| DIN EN 1526:2009-07 | SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.