VDE 0435-303 : 1984
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
ELECTRICAL RELAYS; STATIC MEASURING RELAYS (SMR)
01-11-1994
12-01-2013
1 Anwendungsbereich
2 Begriffe
3 Anforderungen
3.1 Nennwerte
3.2 Klimatische Bedingungen
3.3 Mechanische Festigkeit
3.4 Elektrische Betriebsbedingungen für Hilfskreise
3.5 Genauigkeit und Einflussgrössen
3.5.1 Genauigkeit
3.5.2 Einflussgrössen
3.6 Isolation
3.7 Berührungsschutz
3.8 Funkstörspannungen
3.9 Geräusche
4 Prüfungen
4.1 Prüfung der mechanischen Festigkeit
4.2 Prüfung der Isolation
4.2.1 Spannungsprüfung (Typ- und Stückprüfung)
4.2.2 Stossspannungsprüfung
4.3 Prüfung der Wärmesicherheit
4.4 Prüfung der dynamischen Kurzschlussfestigkeit
4.5 Prüfung der Genauigkeit
4.6 Prüfung des Einflusses dynamischer Vorgänge in
den Eingangs- und Hilfskreisen
4.7 Prüfung des Einflusses einer Wechselstromkomponente
in der Hilfsgleich spannung
4.8 Stossspannungsprüfung und HF-Störprüfung
4.9 Weitere Prüfungen der EMV
(Elektromagnetische Verträglichkeit)
4.10 Sonstige Prüfungen
4.11 Bezugswerte der Einflussgrössen und -faktoren
für die Prüfungen
5 Aufschriften, Kennzeichnungen und Betriebsunterlagen
Anhang A
Zitierte Normen
Weitere Normen
Frühere Ausgaben
Änderungen
Erläuterungen
DevelopmentNote |
Partially supersedes VDE 0435. (09/2002)
|
DocumentType |
Standard
|
PublisherName |
Verband Deutscher Elektrotechniker
|
Status |
Withdrawn
|
Supersedes |
Standards | Relationship |
DIN VDE 0435-303 : DRAFT 98 | Identical |
DIN 57435-303 : 1984 | Identical |
DIN 57435-303 : 1984 | Corresponds |
DIN 46449:1970-04 | INSULATING VARNISHES AND INSULATING RESIN MATERIALS FOR ELECTRICAL PURPOSES; FINISHING VARNISHES, TEST METHODS |
IEC 60255-3:1989 | Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time |
VDE 0876-1 : 1978 AMD 1980 | RADIO INTERFERENCE MEASURING APPARATUS - RADIO INTERFERENCE MEASURING RECEIVER WITH WEIGHTED INDICATION & ACCESSORIES |
DIN 40040:1987-04 | APPLICABILITY CLASSES AND RELIABILITY FIGURES FOR COMPONENTS OF TELECOMMUNICATION AND ELECTRONICS |
VDE 0877-1 : 1989 | MEASUREMENT OF RADIO INTERFERENCE - MEASUREMENT OF RADIO INTERFERENCE VOLTAGES |
VDE 0411-2 : 1969 | PROTECTIVE MEASURES FOR ELECTRONIC MEASURING INSTRUMENTS - ELECTRONIC AUTOMATIC CONTROLS |
DIN 45635-10 : 1974 | MEASUREMENT OF AIRBORNE NOISE EMITTED BY MACHINES; ENVELOPING MEASUREMENT METHOD; ROTATING ELECTRICAL MACHINES |
DIN IEC 60651:1981-12 | SOUND LEVEL METERS |
IEC 60255-16:1982 | Electrical relays - Part 16: Impedance measuring relays |
VDE 0141 : 2000 | EARTHING SYSTEMS FOR POWER INSTALLATIONS WITH RATED VOLTAGES ABOVE 1 KV |
DIN 40050:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER |
DIN IEC 60068-2-6:1990-06 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST Fc AND GUIDANCE: VIBRATION (SINUSOIDAL) |
DIN 46249-1:1980-09 | SNAP-ON CONNECTORS, NON INSULATED; REQUIREMENTS, TESTS |
VDE 0877-2 : 1985 | MEASUREMENT OF RADIO INTERFERENCE - MEASUREMENT OF RADIO INTERFERENCES FIELD-STRENGTH |
IEC 60255-11:2008 | Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port |
IEC 60255-17:1982 | Electrical relays - Part 17: Thermal electrical relays for motor protection |
VDE 0160 : 1998-04 | ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
VDE 0411-1 : 2011 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
DIN 57106-100 : 1983 | PROTECTION AGAINST ELECTRIC SHOCK; ACTUATING MEMBERS POSITIONED CLOSE TO PARTS LIABLE TO SHOCK |
IEC 60255-5:2000 | Electrical Relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests |
IEC 60255-6:1988 | Electrical relays - Part 6: Measuring relays and protection equipment |
IEC 60255-8:1990 | Electrical relays - Part 8: Thermal electrical relays |
VDE 0110 : 1972 | SPECIFICATION FOR CLEARANCES AND CREEPAGE DISTANCES IN ELECTRICAL EQUIPMENT |
IEC 60255-18:1982 | Electrical relays. Part 18: Dimensions for general purpose all-or-nothing relays |
DIN 40110:1975-10 | QUANTITIES USED IN ALTERNATING CURRENT THEORY |
VDE 0106-100 : 1983 | PROTECTION AGAINST ELECTRIC SHOCK - ACTUATING MEMBERS POSITIONED CLOSE TO PARTS LIABLE TO SHOCK |
VDE 0100 : 1973 | REGULATIONS FOR THE SETTING-UP OF POWER PLANTS WITH RATED VOLTAGES UP TO 1000 V |
DIN 46456-1 : 1974 | VDE-SPECIFICATIONS FOR VARNISHES AND RESIN COMPOUNDS FOR ELECTRICAL INSULATION - TYPES AND TEST METHODS |
IEC 60255-12:1980 | Electrical relays - Part 12: Directional relays and power relays with two input energizing quantities |
VDE 0100-540 : 2012-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS (IEC 60364-5-54:2011) |
VDE 0360-1 : 2006 | Varnishes used for electrical insulation Part 1: Definitions and general requirements (IEC 60464-1:1998 + A1:2006) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.