UNI EN ISO 9809-2 : 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
15-09-2022
01-01-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Inspection and testing
6 Materials
7 Design
8 Construction and workmanship
9 Type approval procedure
10 Batch tests
11 Tests/examinations on every cylinder
12 Certification
13 Marking
Annex A (normative) - Description and evaluation of
manufacturing imperfections and conditions for rejection
of seamless steel gas cylinders at time of final visual
inspection by the manufacturer
Annex B (normative) - Ultrasonic examination
Annex C (informative) - Type approval certificate
Annex D (informative) - Acceptance certificate
Annex NA (normative) - Specific European requirements
Bibliography
Describes minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases.
| DevelopmentNote |
Supersedes UNI EN 1964-2. (11/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 9809-2:2010 | Identical |
| EN ISO 9809-2:2010 | Identical |
| UNI 11439 : 2012 | SELF-CONTAINED POSITIVE PRESSURE OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS - GUIDELINES FOR MAINTENANCE |
| ISO/TR 12391-1:2001 | Gas cylinders Refillable seamless steel Performance tests Part 1: Philosophy, background and conclusions |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 11116-2:1999 | Gas cylinders 17E taper thread for connection of valves to gas cylinders Part 2: Inspection gauges |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 9329-1:1989 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| EN ISO 13769:2009 | Gas cylinders - Stamp marking (ISO 13769:2007) |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO/TR 12391-2:2002 | Gas cylinders Refillable seamless steel Performance tests Part 2: Fracture performance tests Monotonic burst tests |
| ISO/TR 12391-4:2002 | Gas cylinders Refillable seamless steel Performance tests Part 4: Flawed-cylinder cycle test |
| ISO 10286:2007 | Gas cylinders Terminology |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| EN ISO 11114-4:2017 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) |
| ISO/TR 12391-3:2002 | Gas cylinders Refillable seamless steel Performance tests Part 3: Fracture performance tests Cyclical burst tests |
| ISO 11191:1997 | Gas cylinders 25E taper thread for connection of valves to gas cylinders Inspection gauges |
| ISO 6406:2005 | Gas cylinders Seamless steel gas cylinders Periodic inspection and testing |
| ISO 11116-1:1999 | Gas cylinders 17E taper thread for connection of valves to gas cylinders Part 1: Specifications |
| ISO 11117:2008 | Gas cylinders Valve protection caps and valve guards Design, construction and tests |
| ISO 13769:2007 | Gas cylinders Stamp marking |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.