UNI EN ISO 19902 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
06-09-2022
01-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Abbreviated terms
6 Overall considerations
7 General design requirements
8 Actions for pre-service and removal
situations
9 Actions for in-place situations
10 Accidental situations
11 Seismic design considerations
12 Structural modelling and analysis
13 Strength of tubular members
14 Strength of tubular joints
15 Strength and fatigue resistance of other
structural components
16 Fatigue
17 Foundation design
18 Corrosion control
19 Materials
20 Welding, fabrication and weld inspection
21 Quality control, quality assurance and
documentation
22 Loadout, transportation and installation
23 In-service inspection and structural
integrity management
24 Assessment of existing structures
25 Structure reuse
Annex A (informative) - Additional information
and guidance
Annex B (informative) - CTOD testing procedures
Annex C (informative) - Material category approach
Annex D (informative) - Design class approach
Annex E (informative) - Welding and weld inspection
requirements - Material category approach
Annex F (informative) - Welding and weld inspection
requirements - Design class approach
Annex G (normative) - Fabrication tolerances
Annex H (informative) - Regional information
Bibliography
Defines requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: - caissons, free-standing and braced; - jackets; - monotowers; - towers.
| Committee |
E16.34
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 19902:2007 | Identical |
| BS 5400-5:1979 | Steel, concrete and composite bridges Code of practice for design of composite bridges |
| BS 7448-1:1991 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials |
| ISO 19901-2:2017 | Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| ASTM A 573/A573M : 2013 : REDLINE | Standard Specification for Structural Carbon Steel Plates of Improved Toughness |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
| CSA S473 : 2004 | STEEL STRUCTURES |
| NEN 6743 : 1991 AMD 1 1997 | GEOTECHNICS - CALCULATION METHOD FOR BEARING CAPACITY OF PILE FOUNDATION - COMPRESSION PILES |
| API 56 : 1995 | RECOMMENDED PRACTICES FOR TESTING SAND USED IN HYDRAULIC FRACTURING OPERATIONS |
| ASTM A 537/A537M : 2013 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
| NACE RP 03 87 : 0 | METALLURGICAL AND INSPECTION REQUIREMENTS FOR CAST SACRIFICIAL ANODES FOR OFFSHORE APPLICATIONS |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| API BULL 2V : 2004 | DESIGN OF FLAT PLATE STRUCTURES |
| ISO 19901-7:2013 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 12473:2014 | General principles of cathodic protection in seawater |
| ISO 19903:2006 | Petroleum and natural gas industries Fixed concrete offshore structures |
| ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| API 2A : 1986 | RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| API 5L : 2012 | LINE PIPE |
| ASTM A 578/A578M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
| ISO 19901-4:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations |
| BS EN 1993-1-1 : 2005 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| ANSI A58.1 : 1982 | DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES, MINIMUM, |
| ISO 19906:2010 | Petroleum and natural gas industries Arctic offshore structures |
| EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| AWS QC1 : 2007 | STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS |
| W178.2-14 | Certification of welding inspectors |
| EN 12495:2000 | Cathodic protection for fixed steel offshore structures |
| ENV 1991-2-4 : 1995 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - WIND ACTIONS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 12135:2016 | Metallic materials Unified method of test for the determination of quasistatic fracture toughness |
| BS 7448-2:1997 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
| ASTM A 139/A139M : 2016 : REDLINE | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| BS 7448-4:1997 | Fracture mechanics toughness tests Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials |
| EN 10219-2:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
| API 2A LRFD : 1993 | RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN |
| AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
| ISO 19901-5:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction |
| ISO 19901-1:2015 | Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| ISO 19905-1:2016 | Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups |
| CSA S471 : 2004 | GENERAL REQUIREMENTS, DESIGN CRITERIA, THE ENVIRONMENT, AND LOADS |
| BS 7361-1:1991 | Cathodic protection Code of practice for land and marine applications |
| W178.1-14 | Certification of welding inspection organizations |
| ISO 10414-1:2008 | Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids |
| NS 3472 : 2001 | STEEL STRUCTURES - DESIGN RULES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.