UNI EN 10250-1 : 2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS
11-10-2022
30-09-2001
Foreword
1 Scope
2 Normative references
3 Definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Manufacture of the steel
7 Manufacture of the product
8 Surface condition and internal soundness
9 Chemical composition
10 Mechanical properties
11 Sampling and preparation of test pieces
12 Mechanical test methods
13 Retests and re-heat treatment
14 Inspection
15 Marking
Annex A (normative) Options
Annex B (informative) Ruling section and equivalent
thickness
Gives the technical delivery conditions for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, for engineering use.
| Committee |
UNSIDER
|
| DevelopmentNote |
Together with UNI EN 10250-2, supersedes UNI 7746. With UNI EN 10250-2 and UNI EN 10250-3, supersedes UNI 8551. (11/2001)
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 10250-1 : 1999 | Identical |
| EN 10250-1:1999 | Identical |
| I.S. EN 10250-1:2000 | Identical |
| NBN EN 10250-1 : 1999 | Identical |
| BS EN 10250-1:1999 | Identical |
| UNE-EN 10250-1:2000 | Identical |
| NF EN 10250-1 : 1999 | Identical |
| NS EN 10250-1 : 1ED 1999 | Identical |
| NEN EN 10250-1 : 1999 | Identical |
| SN EN 10250-1 : 1999 | Identical |
| DIN EN 10250-1:1999-12 | Identical |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 288-1:1992/A1:1997 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
| EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| EN 10228-2:2016 | Non-destructive testing of steel forgings - Part 2: Penetrant testing |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN 10228-1:1999 | Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| PREN 10228-4 : DRAFT 2012 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 10003-1 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.