UNE-EN 61124:2014
Current
The latest, up-to-date edition.
Reliability testing - Compliance tests for constant failure rate and constant failure intensity
Hardcopy , PDF
Spanish, Castilian, English
26-02-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Terms, definitions, symbols and acronyms
3.1 Terms and definitions
3.2 Acronyms and symbols
4 General requirements and area of application
4.1 Requirements
4.2 Applicability to replaced and repaired items
4.3 Types of test plans
5 General test procedure
5.1 Test conditions
5.2 General characteristics of the test plans
5.3 Data to be recorded
5.4 Calculation of accumulated test time, T[*]
5.5 Number of failures
6 Sequential test plans
6.1 General
6.2 Common test procedure
6.3 Decision criteria
6.4 Overview of test plans
7 Fixed time/failure terminated test plans - Fixed duration
test plans
7.1 General
7.2 Common test procedure
7.3 Decision criteria
7.4 Test plans
8 Design of alternative time/failure terminated test plans
8.1 General
8.2 Design procedures
8.3 Common test procedure
8.4 Decision criteria
9 Calendar time/failure terminated test plans for non-replaced
items
9.1 General
9.2 Common test procedure
9.3 Decision criteria
9.4 Use of Table 2 of IEC 61123:1991 for fixed calendar time
tests
10 Combined test plans
10.1 General
10.2 Common test procedure
10.3 Decision criteria
10.4 Test plans
11 Performing the test
12 Presentation of results
Annex A (normative) Tables and graphs for sequential test plans
Annex B (normative) Graphs for fixed time/failure terminated test
plans
Annex C (normative) Graphs for alternative time/failure terminated
test plans
Annex D (normative) Tables and graphs for combined test plans and
additional sequential test plans
Annex E (informative) Examples and mathematical references for
sequential test plans
Annex F (informative) Design of sequential test plans using a
spreadsheet program
Annex G (informative) Examples and mathematical references for
fixed duration time/failure terminated test plans
Annex H (informative) Design of fixed duration time/failure
terminated test plans using a spreadsheet program
Annex I (informative) Examples and mathematical references for the
design of alternative time/failure terminated test plans
Annex J (informative) Examples and mathematical references for the
calendar time terminated test plans
Annex K (informative) Derivation and mathematical reference for the
optimized test plans of GOST 27.402
Annex ZA (normative) Normative references to international
publications with their corresponding European publications
Bibliography
Provides a number of optimized test plans, the corresponding operating characteristic curves and expected test times.
| Committee |
CTN 200/SC 56
|
| DocumentType |
Standard
|
| Pages |
134
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IEC 61124:2012 | Identical |
| NBN EN 61124 : 2012 | Identical |
| SN EN 61124 : 2006 | Identical |
| BS EN 61124:2012 | Identical |
| EN 61124:2012 | Identical |
| DIN EN 61124:2013-01 | Identical |
| NF EN 61124 : 2012 | Identical |
| UNE 200008:2018 IN | Qualification of technical and management personnel in the field of Dependability and Industrial Safety engineering (RAMS Engineer) |
| IEC 61123:1991 | Reliability testing - Compliance test plans for success ratio |
| IEC 60605-4:2001 | Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals |
| IEC 60605-6:2007 | Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity |
| MIL-HDBK-781 Revision A:1996 | RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION AND PRODUCTION |
| IEC 60605-2:1994 | Equipment reliability testing - Part 2: Design of test cycles |
| IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.