UNE-EN 10088-3:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Hardcopy , PDF
09-01-2022
Spanish, Castilian, English
18-03-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions
3.1 Stainless steels
3.2 Product forms
3.3 Types of heat treatment
4 Dimensions and tolerances on dimensions
5 Calculation of mass and tolerances on mass
6 Designation and ordering
6.1 Designation of steel grades
6.2 Designation to be used on ordering
7 Classification of grades
8 Requirements
8.1 Production process
8.2 Delivery condition
8.3 Chemical composition
8.4 Chemical corrosion properties
8.5 Mechanical properties
8.6 Surface quality
8.7 Internal soundness
9 Testing
9.1 General
9.2 Agreement on tests and inspection documents
9.3 Specific inspection and testing
9.4 Test methods
9.5 Retests
10 Marking
Annexes
A (informative) Guidelines for further treatment
(including heat treatment) in fabrication
B (informative) Applicable dimensional standards
C (informative) Bibliography
Defines the technical delivery conditions for semi-finished products, hot or cold-formed bars, rods, wire, sections and bright products of standard grades and special grades of corrosion resisting stainless steels for general purposes.
| Committee |
CTN 36
|
| DevelopmentNote |
Supersedes UNE 36016-1. (07/2003)
|
| DocumentType |
Standard
|
| Pages |
72
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 10088-3 : 2014 | Identical |
| NF EN 10088-3 : 2014 | Identical |
| NEN EN 10088-3 : 2014 | Identical |
| NS EN 10088-3 : 2014 | Identical |
| I.S. EN 10088-3:2014 | Identical |
| SN EN 10088-3 : 2014 | Identical |
| UNI EN 10088-3 : 2014 | Identical |
| BS EN 10088-3:2014 | Identical |
| EN 10088-3:2014 | Identical |
| ONORM EN 10088-3 : 2014 | Identical |
| DIN EN 10088-3:2014-12 | Identical |
| UNE 27256:2012 | Civil shipbuilding and ship repairing. Standardised components. Manholes: Lifting ring for manhole cover |
| UNE 60715-1:2013 | Flexible hoses for connection of gas receiving installations to gas-fired appliances. Metal hose assemblies with safety gas connection valves and thread. Part 1: Elastomeric packed metallic stripwound flexible hose assemblies. |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10270-3:2011 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN 10221:1995 | Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 15510:2014 | Stainless steels — Chemical composition |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 10264-4:2012 | Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| EN 10306:2001 | Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
| EN 10250-4:1999 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| EN 10163-3:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN 10213-4 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES |
| EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.