Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

TS 102 971 : 1.1.1

Current

Current

The latest, up-to-date edition.

ACCESS AND TERMINALS (AT); PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); HARMONIZED SPECIFICATION OF PHYSICAL AND ELECTRICAL CHARACTERISTICS OF A 2-WIRE ANALOGUE INTERFACE FOR SHORT LINE INTERFACE

Available format(s)

Hardcopy , PDF

Language(s)

English

$43.16
Including GST where applicable

Intellectual Property Rights
Foreword
Introduction
1 Scope
2 References
3 Definitions, symbols and abbreviations
   3.1 Definitions
   3.2 Symbols
   3.3 Abbreviations
4 General
5 Physical connections
   5.1 Mechanical aspects
   5.2 Support of more than one terminal
6 DC feed conditions
   6.1 Polarity
   6.2 Quiescent state
   6.3 Loop current
7 Seize signal
   7.1 Must not seize condition
   7.2 Must seize condition
8 Clear signal
   8.1 Clear signal generated by TE
   8.2 Clear indication from the network
   8.3 Seizing the line for a new call
9 Impedance
   9.1 Impedance at the R interface
   9.2 Balance about earth
10 Transmission
   10.1 Relative level
   10.2 Variation of gain with input level
   10.3 Frequency response
   10.4 Coding law
   10.5 Noise
   10.6 Echo and stability
   10.7 Crosstalk
   10.8 Total distortion including quantizing distortion
11 DTMF Dialling
12 Ringing
   12.1 Ringing drive capability
   12.2 Ring cadence
   12.3 Ring trip
   12.4 False ring trip
13 Supervisory signals
   13.1 Supervisory tones
   13.2 Tone levels
   13.3 Cadences and frequencies
14 Optional functions
   14.1 Loop disconnect dialling
   14.2 Register recall
   14.3 Metering
   14.4 Supplementary and other enhanced services
   14.5 Polarity reversal
   14.6 End of call signal ("K-break")
   14.7 Payphones
Annex A (informative): Test set-up for the change from DC to
        ringing voltage
Annex B (informative): Bibliography
History

Describes the physical and electrical characteristics at an analogue interface. The present document specifies characteristics of the interface to enable it to operate with most existing national PSTN TE, and especially with PSTN TE designed according to the European standards for analogue presented TEs.

Committee
AT ANALOGUE
DocumentType
Standard
Pages
27
PublisherName
European Telecommunications Standards Institute
Status
Current

ES 202 718 : 1.2.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR IP-BASED NARROWBAND AND WIDEBAND HOME AND NETWORK MEDIA GATEWAYS FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER
TR 102 702 : 1.1.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM) STUDY OF ISSUES RELATED TO POTS INJECTION IN THE CUSTOMER WIRING FROM XDSL VOIP HOME GATEWAY
EG 201 730-2 : 2.1.2 TERMINALS' ACCESS TO PUBLIC TELECOMMUNICATIONS NETWORKS; APPLICATION OF THE DIRECTIVE 1999/5/EC (R&TTE), ARTICLE 4.2; GUIDELINES FOR THE PUBLICATION OF INTERFACE SPECIFICATIONS; PART 2: ANALOGUE NARROW-BAND WIRELINE INTERFACES

ES 201 912 : 1.2.1 ACCESS AND TERMINALS (AT); SHORT MESSAGE SERVICE (SMS) FOR PSTN/ISDN; SHORT MESSAGE COMMUNICATION BETWEEN A FIXED NETWORK SHORT MESSAGE TERMINAL EQUIPMENT AND A SHORT MESSAGE SERVICE CENTRE
TR 101 768 : 1.1.1 PUBLIC SWITCHED TELEPHONE NETWORK; STUDY ON THE GENERATION OF ANALOGUE RINGING SIGNALS
ETR 344 : 20001 TERMINAL EQUIPMENT (TE) - THE TECHNICAL FEASIBILITY OF A HARMONIZED PLUG AND SOCKET STANDARD
ES 200 778-2 : 1.2.2 ACCESS AND TERMINALS (AT); ANALOGUE ACCESS TO THE PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); PROTOCOL OVER THE LOCAL LOOP FOR DISPLAY AND RELATED SERVICES; TERMINAL EQUIPMENT REQUIREMENTS; PART 2: OFF-HOOK DATA TRANSMISSION
ES 201 235-1 : 1.1.1 SPECIFICATION OF DUAL TONE MULTI-FREQUENCY (DTMF) TRANSMITTERS AND RECEIVERS; PART 1: GENERAL
EN 300 659-2 : 1.3.1 PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); SUBSCRIBER LINE PROTOCOL OVER THE LOCAL LOOP FOR DISPLAY (AND RELATED) SERVICES; PART 2: OFF-HOOK DATA TRANSMISSION
TR 101 183 : 1.1.1 PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); ANALOGUE RINGING SIGNALS
EN 300 659-1 : 1.3.1 PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); SUBSCRIBER LINE PROTOCOL OVER THE LOCAL LOOP FOR DISPLAY (AND RELATED) SERVICES; PART 1: ON-HOOK DATA TRANSMISSION
ES 201 071 : 1.1.2 PUBLIC SWITCHED TELEPHONE NETWORK (PSTN) - PROTOCOL OVER THE LOCAL LOOP FOR DISPLAY SERVICES - SERVER DISPLAY AND SCRIPT SERVICES (SDSS)
ES 200 778-1 : 1.2.2 ACCESS AND TERMINALS (AT); ANALOGUE ACCESS TO THE PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); PROTOCOL OVER THE LOCAL LOOP FOR DISPLAY AND RELATED SERVICES; TERMINAL EQUIPMENT REQUIREMENTS; PART 1: ON-HOOK DATA TRANSMISSION
ES 201 235-3 : 1.3.1 ACCESS AND TERMINALS (AT); SPECIFICATION OF DUAL-TONE MULTI-FREQUENCY (DTMF) TRANSMITTERS AND RECEIVERS; PART 3: RECEIVERS
TBR 021 : 20001 TERMINAL EQUIPMENT (TE); ATTACHMENT REQUIREMENTS FOR PAN-EUROPEAN APPROVAL FOR CONNECTION TO THE ANALOGUE PUBLIC SWITCHED TELEPHONE NETWORKS (PSTNS) OF TE (EXCLUDING TE SUPPORTING THE VOICE TELEPHONY SERVICE) IN WHICH NETWORK ADDRESSING, IF PROVIDED, IS BY MEANS OF DUAL TONE MULTI FREQUENCY (DTMF) SIGNALLING
TR 101 041-1 : 1.1.1 HUMAN FACTORS (HF); EUROPEAN HARMONIZATION OF NETWORK GENERATED TONES - A REVIEW AND RECOMMENDATIONS
EG 201 120 : 1.1.1 PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); METHOD OF RATING TERMINAL EQUIPMENT SO THAT IT CAN BE CONNECTED IN SERIES AND/OR IN PARALLEL TO A NETWORK TERMINATION POINT (NTP)
TR 101 959 : 1.1.1 ACCESS AND TERMINALS (AT); RINGING WITHOUT DC FOR TERMINAL EQUIPMENT (TE), TERMINAL SUPPORT INTERFACES (TSI) AND LOCAL EXCHANGE INTERFACES (LEI)
ES 201 729 : 1.1.1 PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); 2-WIRE ANALOGUE VOICE BAND SWITCHED INTERFACES; TIMED BREAK RECALL (REGISTER RECALL); SPECIFIC REQUIREMENTS FOR TERMINALS
TR 101 182 : 1.1.1 ANALOGUE TERMINALS AND ACCESS (ATA) - DEFINITIONS, ABBREVIATIONS AND SYMBOLS
TIA 968 : B2009 ADD 3 2016 TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT TECHNICAL REQUIREMENTS FOR CONNECTION OF TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK
TBR 038 : 20001 PUBLIC SWITCHED TELEPHONE NETWORK (PSTN) - ATTACHMENT REQUIREMENTS FOR A TERMINAL EQUIPMENT INCORPORATING AN ANALOGUE HANDSET FUNCTION CAPABLE OF SUPPORTING THE JUSTIFIED CASE SERVICE WHEN CONNECTED TO THE ANALOGUE INTERFACE OF THE PSTN IN EUROPE
ES 201 187 : 1.1.1 2-WIRE ANALOGUE VOICE BAND INTERFACES - LOOP DISCONNECT (LD) DIALLING SPECIFIC REQUIREMENTS

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.