TR 4661 : 2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AEROSPACE SERIES - HINGES, FLIGHT CONTROLS MATERIALS AND SURFACE TREATMENTS
Superseded date
05-12-2023
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Codes for designation origins
4 Low alloy steels
5 Corrosion resisting steels
6 Low alloy steels of carburizing
7 Low alloy steels for structure
8 Titanium alloy
9 Mechanical characteristics
10 Surface treatments
Specifies the EN standardized materials or, on the national level, the materials standardized by ASD member countries to be used for manufacturing the relevant products to insure their functional interchangeability.
| DocumentType |
Standard
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Superseded
|
| SupersededBy |
| PREN 4854-2 : 200P1 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 2: DIMENSIONS AND LOADS FOR WIDE SERIES |
| PREN 4854-1 : 200P1 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 1: DIMENSIONS AND LOADS FOR NARROW SERIES |
| SAE AMS5659S : 2016 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| EN 3161:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa |
| PREN 2031 : 1 | AEROSPACE SERIES - STEEL FE-PL31 - HARDENED AND TEMPERED - BARS |
| PREN 2475 : 200P1 | |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| EN 2438:2008 | Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm |
| PREN 3813 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - D[E] <= 50 MM |
| PREN 2817 : 200P3 | |
| SAE AMS 5643 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| PREN 2030 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3501 (X105CRMO17) - HARDENED AND TEMPERED - BARS D[E] <= 150 MM |
| ISO 8074:1985 | Aerospace Surface treatment of austenitic stainless steel parts |
| PREN 2132 : 1 | AEROSPACE SERIES - ELECTRODEPOSITION OF CHROMIUM FOR ENGINEERING PURPOSES |
| SAE AMS 5828 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 57NI - 19.5CR - 13.5CO - 4.2MO - 3.1TI - 1.4AL - 0.006B, VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED |
| EN 2821:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
| SAE AMS 5618 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6440 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), FOR BEARING APPLICATIONS |
| PREN 3521 : 200P2 | |
| EN 2133:2010 | Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys |
| PREN 2159 : 2 | AEROSPACE SERIES - STEEL FE-PM44 - HARDENED AND TEMPERED - BARS D <= 150 MM |
| PREN 2135 : 200P1 | AEROSPACE SERIES - STEEL FE-PL61 - CARBURIZED, HARDENED AND TEMPERED - BAR D[E] <= 40 MM |
| SAE AMS 4965 : 2014 | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED |
| MIL-S-18732 Revision D:1968 | Steel Bars, Wire, Forging Stock, Forgings Tubing (431), Special Quality |
| PREN 2137 : 1 | AEROSPACE SERIES - STEEL FE-PL75 - 1100 MPA <= R[M] <= 1250 MPA - BARS D[E] <= 100 MM |
| EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| MIL-S-7420 Revision B:1958 | STEEL BARS, ALLOY, CHROMIUM HIGH CARBON E 52100 [AIRCRAFT QUALITY] |
| ISO 8075:1985 | Aerospace Surface treatment of hardenable stainless steel parts |
| PREN 2221 : 1 | AEROSPACE SERIES - STEEL FE-PL31 - HARDENED AND TEMPERED - HOLLOW BARS 3,5 MM <= A <= 55 MM |
| SAE AMS 5622 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED |
| PREN 2227 : 1 | AEROSPACE SERIES - STEEL FE-PM44 - HARDENED AND TEMPERED - HAND AND DIE FORGINGS D[E] <= 150 MM |
| SAE AMS 5630 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C) |
| PREN 3458 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - ANNEALED - 900 <= R[M] <= 1160 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 2815:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa |
| PREN 3353 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - SOLUTION TREATED AND AGED - R[M] >= 1100 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM |
| TR 3900 : 1 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN AECMA DESIGNATION SYSTEMS |
| PREN 2222 : 1 | AEROSPACE SERIES - STEEL FE-PL31 - HARDENED AND TEMPERED - HAND AND DIE FORGINGS |
| SAE AMS 6263 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.11 - 0.17C) (9315) |
| PREN 2473 : 2 | AEROSPACE SERIES - STEEL FE-PL74 - 900 MPA <= R[M] <= 1100 MPA - BARS D[E] <= 150 MM |
| SAE AMS 4967 : 2014 | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE |
| PREN 2471 : 1 | AEROSPACE SERIES - STEEL FE-PL74 - 1250 MPA <= R[M] <= 1450 MPA - BARS D[E] <= 40 MM |
| SAE AMS 4928 : 2016 | TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.