SAE MA 4623 : 2015
Current
Current
The latest, up-to-date edition.
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
21-08-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 NOTES
This document defines the requirements for heavy-duty hose assemblies suitable for use in 21 000 kPa, 135 °C aircraft systems where rapid rate pressure pulsing and torsional/longitudinal flexing may occur in addition to normal hydraulic system loading.
| Committee |
G-3
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE AMS 2486 : 2010 | CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE |
| SAE MA 4624 : 2015 | HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, STRAIGHT TO STRAIGHT, METRIC |
| SAE AMS5659S | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE AMS5645S | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE ARP 1835 : 2013 | PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES |
| SAE ARP 603 : 1985 | IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES |
| SAE AS 611F : 2010 | HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| QQ-P-35 Revision C:1988 | PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| SAE MA 4627 : 2015 | HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, 45 TO 45 DEGREES, METRIC |
| SAE MA 2014 : 2015 | FITTING END, ACORN FLARELESS, DESIGN STANDARD, METRIC |
| SAE MA 4626 : 2015 | HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, STRAIGHT TO 90 DEGREES, METRIC |
| SAE MA 2002 : 2013 | IMPULSE TESTING OF HYDRAULIC HOSE, TUBING AND FITTING ASSEMBLIES |
| MIL-T-8808 Revision B:1981 | TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY |
| SAE AMS 5571J:2012(R2018) | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AMS5643U | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AS1055D | FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS |
| SAE AS1073B | SLEEVE HOSE ASSEMBLY, HEAT SHRINKABLE |
| SAE MA 2096 : 2015 | FITTING END, 24 DEGREES CONE, BULKHEAD, DESIGN STANDARD, METRIC |
| SAE AMS5647K | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
| SAE MA 2273 : 2015 | FITTING END, BEAM SEAL, EXTERNAL THREAD, DESIGN STANDARD, METRIC |
| SAE ARP908C | TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING |
| SAE AMS 4965 : 2014 | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED |
| SAE MA 2095 : 2015 | FITTING END, 24 DEGREES CONE, DESIGN STANDARD, METRIC |
| MIL-STD-831 Base Document:1963 | TEST REPORTS, PREPARATION OF |
| SAE AMS5567F | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
| SAE MA 2274 : 2015 | FITTING END, BEAM SEAL, BULKHEAD, EXTERNAL THREAD, DESIGN STANDARD, METRIC |
| SAE AIR 1228 : 2009 | STANDARD IMPULSE MACHINE EQUIPMENT AND OPERATION |
| SAE AS 4265 : 2013 | IMPULSE TESTING OF HYDRAULIC TUBING AND FITTINGS, S-N CURVE |
| SAE AMS 5637 : 2012 | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS5646P | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| SAE MA 1370 : 2012 | SCREW THREADS - MJ PROFILE, METRIC |
| SAE MA 4625 : 2015 | HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, STRAIGHT TO 45 DEGREES, METRIC |
| SAE AMS 4945 : 2014 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED |
| SAE AS1072F | SLEEVE, HOSE ASSEMBLY, FIRE PROTECTION |
| SAE MA 4628 : 2015 | HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY, 21 000 KPA, 135 °C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, 45° TO 90°, METRIC |
| SAE AMS5575P | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AMS5570Q | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT |
| MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS |
| SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| SAE MA 2078 : 1992 | TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE), METRIC |
| SAE AMS5639J | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| SAE MA 4629 : 2015 | HOSE ASSEMBLY, PTFE, PARA ARAMID REINFORCED, HEAVY-DUTY 21000 kPa, 135 DEG C, FLARELESS, TITANIUM FITTINGS, JUMP SIZES, 90 TO 90 DEGREES, METRIC |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| SAE AS 4488 : 2013 | TUBULAR ASSEMBLIES, FUSION WELDED, INSPECTION PROCESSES AND ACCEPTANCE STANDARDS FOR |
| SAE AMS5636F | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| SAE AMS 5576 : 2005 | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING - 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS5556J | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED |
| MIL-F-85421 Revision B:1986 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR |
| SAE AMS 4928 : 2016 | TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED |
| MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
| SAE AMS5557J | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.