SAE J 844 : 2012
Current
Current
The latest, up-to-date edition.
Sorry this product is not available in your region.
1 Scope
2 References
3 Installation and Assembly Recommendations
4 Identification
5 Manufacture
6 Construction
7 Dimensions and Tolerances
8 Mechanical Properties
9 Performance Requirements
10 Notes
Describes minimum requirements for nonmetallic tubing in air brake systems.
| DocumentType |
Standard
|
| ProductNote |
STABILIZED VERSION IS NOW AVAILABLE
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| MIL-T-62021 Revision E:1992 | TRUCKS, PIPE AND SEWER CLEANER: HIGH PRESSURE WATER JET TYPE, 5680 LITER (1,500 GALLON), 12,700 KILOGRAMS (28,000 POUNDS) GVW, 4X2, MODIFIED COMMERCIAL |
| SAE J 2394 : 2017 | SEVEN CONDUCTOR CABLE FOR ABS POWER - TRUCK AND BUS |
| SAE J 2494 : 2011 | PUSH-TO-CONNECT TUBE FITTINGS FOR USE IN THE PIPING OF VEHICULAR AIR BRAKE |
| SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
| KKK-T-2807 Base Document:1992 | TRUCKS, LUBRICATING AND FUEL SERVICING 4 BY 2 AND 4 BY 4 |
| DEFSTAN 23-6/3(2000) : 2000 | GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT |
| SAE J 2494-4 : 2011(R2018) | CARTRIDGE CAVITY |
| FED-STD-794 Revision Y:2005 | TRUCKS: MEDIUM COMMERCIAL, 4X2 AND 4X4 9,500 TO 16,000 KG (21,000 TO 35,000 LBS) GVWR |
| SAE J 1131 : 1998 | PERFORMANCE REQUIREMENTS FOR SAE J844 NONMETALLIC TUBING AND FITTING ASSEMBLIES USED IN AUTOMOTIVE AIR BRAKE SYSTEMS |
| MIL-PRF-62321 Revision D:1997 | TRUCKS, TANK: POTABLE WATER, 1000 AND 2200 GALLON, DIESEL AND GASOLINE ENGINE DRIVEN, 19,000 AND 34,500 POUNDS GVW, 4X2, 4X4, AND 6X4, COMMERCIAL |
| MIL-T-45380 Revision E:1991 | TRUCKS, MAINTENANCE: EARTH AUGER, TURNTABLE BASE, DIESEL ENGINE DRIVEN, 28,000 POUNDS GVW, 4X4, MODIFIED COMMERCIAL |
| SAE J 2580 : 2016 | IDENTIFICATION AND INSTALLATION OF AIR BRAKE SYSTEM COMPONENTS |
| SAE J 2494-2 : 2017 | DIMENSIONAL SPECIFICATIONS FOR NON-METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM |
| FED-STD-807 Revision M:2005 | TRUCKS: HEAVY COMMERCIAL, 6X4 AND 6X6 19,500 TO 30,000 KG (43,000 TO 66,000 LBS) GVWR |
| SAE J 2494-1 : 2017 | DIMENSIONAL SPECIFICATIONS FOR METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM |
| SAE J 1067 : 2016 | SEVEN CONDUCTOR CABLE - TRUCK AND BUS |
| SAE J 1859 : 2016 | TEST PROCEDURES FOR DETERMINING AIR BRAKE VALVE INPUT-OUTPUT CHARACTERISTICS |
| SAE J 246 : 2017 | SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS |
| SAE J 1394 : 2013 | METRIC NONMETALLIC AIR BRAKE SYSTEM TUBING |
| SAE ARP 1247 : 2018 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS |
| SAE J 2494-1 : 2011 | DIMENSIONAL SPECIFICATIONS FOR METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM |
| ASTM D 4329 : 2013 : REDLINE | Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics |
| SAE J 246 : 2012 | SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS |
| CFR 49(PTS200-399) : 0 | TRANSPORTATION - FEDERAL RAILROAD ADMINISTRATION - FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION |
| SAE J 2494-2 : 2002 | DIMENSIONAL SPECIFICATIONS FOR NON-METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM |
| SAE J 2494-3 : 2007 | PERFORMANCE REQUIREMENTS FOR SAE J844 NON-METALLIC AIR BRAKE TUBING AND PUSH TO CONNECT FITTING ASSEMBLIES USED IN VEHICULAR AIR BRAKE SYSTEMS |
| CFR 49(PTS400-599) : 0 | TRANSPORTATION |
| SAE J 1149 : 2015 | METALLIC AIR BRAKE SYSTEM TUBING AND PIPE |
| SAE J 1131 : 1998 | PERFORMANCE REQUIREMENTS FOR SAE J844 NONMETALLIC TUBING AND FITTING ASSEMBLIES USED IN AUTOMOTIVE AIR BRAKE SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.