SAE J 2593 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
Available format(s)
Hardcopy , PDF
Superseded date
01-02-2022
Superseded by
Language(s)
English
Published date
26-02-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. EXPLANATION OF TERMS AND TERMINOLOGY
4. FLUID CONDUCTOR AND CONNECTOR SERVICE
LIFE
5. HYDRAULIC FLUID CONDUCTOR AND CONNECTOR
INSTALLATION
6. ASSEMBLY PROCEDURES AND TORQUE LEVELS
FOR FLUID CONDUCTOR AND CONNECTORS
7. NOTES
Gives general information for installing and tightening fluid conductors and connectors.
| DocumentType |
Revision
|
| Pages |
34
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| SAE J518/1:2023 | Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection - Part 1: 3.5 to 35 MPa (Code 61) |
| SAE J1926/2:2023-03 | Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| SAE J 1065 : 2016 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| SAE J 1453/3 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| SAE J 1453/2 : 2015 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| SAE J 2551 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
| SAE J 1926/3 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| SAE J 1926/2 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| SAE J 1754/2 : 2015 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC, STEEL WIRE REINFORCED - PART 2: ORDERING INFORMATION |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| SAE J 2064 : 2015 | COUPLED AUTOMOTIVE REFRIGERANT AIR-CONDITIONING HOSE ASSEMBLIES |
| ISO 15171-2:2016 | Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure |
| SAE J 2050 : 2015 | HIGH-TEMPERATURE POWER STEERING PRESSURE HOSE |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 11926-2:1995 | Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends |
| SAE J 517 : 2016 | HYDRAULIC HOSE |
| SAE J 1394 : 2013 | METRIC NONMETALLIC AIR BRAKE SYSTEM TUBING |
| ISO 1179-1:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports |
| ISO 3862:2017 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification |
| ISO 16028:1999 | Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications |
| SAE J 846 : 2015 | CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS |
| ISO 3601-2:2016 | Fluid power systems — O-rings — Part 2: Housing dimensions for general applications |
| SAE J 530 : 1995 | AUTOMOTIVE PIPE FITTINGS |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| SAE J 2658 : 2013 | CARBON AND STEEL ALLOY TUBE CONDUCTOR ASSEMBLIES FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER METALLIC TUBE ASSEMBLIES |
| SAE J 1926/4 : 2010 | Connector for Fluid Power and General Use—Ports and Stud End with ASME B1.1 Threads and O-Ring Seal—Part 4: External Hex and Internal Hex Inch Port Plugs—Dimensions, Design, Test Methods and Requirements |
| SAE J 1527 : 2011 | MARINE FUEL HOSES |
| SAE J 1926/3 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS |
| SAE J 1475 : 2014 | HYDRAULIC HOSE FITTING FOR MARINE APPLICATIONS |
| ISO 3949:2009 | Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 4399:1995 | Fluid power systems and components Connectors and associated components Nominal pressures |
| SAE J 1401 : 2013 | ROAD VEHICLE - HYDRAULIC BRAKE HOSE ASSEMBLIES FOR USE WITH NONPETROLEUM-BASE HYDRAULIC FLUIDS |
| SAE J 516 : 2016 | HYDRAULIC HOSE FITTINGS |
| ISO 12151-2:2003 | Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings |
| ISO 10583:1993 | Aerospace fluid systems — Test methods for tube/fitting assemblies |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| ISO 4397:2011 | Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes |
| SAE J 1290 : 2012 | AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC TUBE CONNECTIONS |
| ISO 9974-1:1996 | Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports |
| SAE J 1754/1 : 2013 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC, STEEL WIRE REINFORCED - PART 1: PROCUREMENT DOCUMENT |
| ISO 9974-3:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
| ISO 6150:1988 | Pneumatic fluid power Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) Plug connecting dimensions, specifications, application guidelines and testing |
| ISO 6149-4:2017 | Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| SAE J 1453/2 : 2015 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| ISO 7-2:2000 | Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
| SAE J 513 : 1999 | REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS |
| ISO 15171-1:1999 | Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 1: Coupling not for connection under pressure |
| SAE J 1273 : 2014 | RECOMMENDED PRACTICES FOR HYDRAULIC HOSE ASSEMBLIES |
| ISO 8331:2016 | Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance |
| SAE J 1231 : 2016 | FORMED TUBE ENDS FOR HOSE CONNECTIONS AND HOSE FITTINGS |
| SAE J 531 : 2015 | AUTOMOTIVE PIPE, FILLER, AND DRAIN PLUGS |
| ISO 9974-2:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 3305:1985 | Plain end welded precision steel tubes — Technical conditions for delivery |
| SAE J 1065 : 2016 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| SAE J 1926/1 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING |
| ISO 6162-2:2012 | Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| SAE J 356 : 2013 | WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING |
| SAE J 532 : 2013 | AUTOMOTIVE STRAIGHT THREAD FILLER AND DRAIN PLUGS |
| ISO 12151-5:2007 | Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| ISO 1179-4:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B) |
| SAE J 1453/3 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS |
| ISO 6149-3:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| SAE J 246 : 2012 | SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS |
| SAE J 343 : 2016 | TEST AND TEST PROCEDURES FOR SAE 100R SERIES HYDRAULIC HOSE AND HOSE ASSEMBLIES |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| SAE J 2614 : 2009 | WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| ISO 4079:2017 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| ISO 12151-3:2010 | Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| SAE J 1615 : 2016 | THREAD SEALANTS |
| SAE J 2094 : 2001 | VEHICLE & CONTROL MODIFICATIONS FOR DRIVERS WITH PHYSICAL DISABILITIES - TERMINOLOGY |
| ISO 6149-2:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| SAE J 2435 : 2015 | WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| SAE J 1650 : 2011 | SEAMLESS COPPER-NICKEL 90-10 TUBING |
| SAE J 1644 : 1998 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR THREADED HYDRAULIC FLUID POWER CONNECTORS |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| SAE J 514 : 2012 | HYDRAULIC TUBE FITTINGS |
| SAE J 526 : 2016 | WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING |
| ISO 8434-5:1995 | Metallic tube connections for fluid power and general use Part 5: Test methods for threaded hydraulic fluid power connections |
| ISO 6149-1:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal |
| ISO 7241-2:2000 | Hydraulic fluid power Quick-action couplings Part 2: Test methods |
| ISO 3457:2003 | Earth-moving machinery — Guards — Definitions and requirements |
| SAE J 1942/1 : 2016 | QUALIFIED HOSES FOR MARINE APPLICATIONS |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| SAE J 527 : 2013 | BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING |
| SAE J 1467 : 2013 | CLIP FASTENER FITTING |
| SAE J 2551 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
| ISO 8434-4:1995 | Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples |
| ISO 3304:1985 | Plain end seamless precision steel tubes — Technical conditions for delivery |
| SAE J 525 : 2016 | WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| ISO 273:1979 | Fasteners — Clearance holes for bolts and screws |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| SAE J 524 : 2016 | SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| ISO 12151-1:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO 10763:1994 | Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures |
| SAE J 1402 : 2010 | AUTOMOTIVE AIR BRAKE HOSE AND HOSE ASSEMBLIES |
| SAE J 1942 : 2014 | HOSE AND HOSE ASSEMBLIES FOR MARINE APPLICATIONS |
| ISO 11926-3:1995 | Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends |
| SAE J 2467 : 2015 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| SAE J 1176 : 2012 | EXTERNAL LEAKAGE CLASSIFICATIONS FOR HYDRAULIC SYSTEMS |
| ISO 12151-4:2007 | Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| SAE J 1926/2 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| SAE J 533 : 2017 | FLARES FOR TUBING |
| SAE J 844 : 2012 | NONMETALLIC AIR BRAKE SYSTEM TUBING |
| ISO 1179-2:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| ISO 1436:2017 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
| ISO 2944:2000 | Fluid power systems and components — Nominal pressures |
| SAE J 1149 : 2015 | METALLIC AIR BRAKE SYSTEM TUBING AND PIPE |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| SAE J 1532 : 2014 | TRANSMISSION OIL COOLER HOSE |
| ISO 263:1973 | ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in |
| ISO 1179-3:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
| ISO 7241-1:1987 | Hydraulic fluid power Quick-action couplings Part 1: Dimensions and requirements |
| SAE J 2613 : 2009 | WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 11926-1:1995 | Connections for general use and fluid power Ports and stud ends with ISO 725 threads and O-ring sealing Part 1: Ports with O-ring seal in truncated housing |
| SAE J 476 : 2013 | DRYSEAL PIPE THREADS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.