SAE J 2577 : 2015
Current
The latest, up-to-date edition.
HEAVY DUTY LAMP ELECTRICAL CONNECTOR STANDARD
Hardcopy , PDF
English
22-09-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. SAMPLES FOR TESTS
5. TEST SEQUENCE
6. TEST METHODS
7. TEST REQUIREMENTS
8. DESIGN REQUIREMENTS
9. INSTALLATION REQUIREMENTS
10. GUIDELINES
11. NOTES
Covers connectors that form the electrical interface(s) between the heavy duty lighting device(s) and the truck and truck/trailer wiring harness system.
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE J 2139 : 2014 | TESTS FOR SIGNAL AND MARKING DEVICES USED ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 2174 : 2015 | HEAVY-DUTY WIRING SYSTEMS FOR TRAILERS 2032 MM OR MORE IN WIDTH |
| SAE J 1432 : 2016 | REAR HIGH MOUNTED STOP LAMPS AND REAR HIGH MOUNTED TURN SIGNAL LAMPS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE USCAR 2 : 2013 | PERFORMANCE SPECIFICATION FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS |
| SAE J 1614 : 2010 | WIRING DISTRIBUTION SYSTEMS FOR OFF-ROAD, SELF-PROPELLED WORK MACHINES |
| SAE J1292 : 2008(S2016) | AUTOMOBILE AND MOTOR COACH WIRING |
| SAE J 2030 : 2015 | HEAVY-DUTY ELECTRICAL CONNECTOR PERFORMANCE STANDARD |
| SAE J 2223/3 : 2011 | CONNECTIONS FOR ON-BOARD ROAD VEHICLE ELECTRICAL WIRING HARNESSES - PART 3: MULTIPOLE CONNECTORS - FLAT BLADE TERMINALS - DIMENSIONAL CHARACTERISTICS AND SPECIFIC REQUIREMENTS |
| SAE J 2202 : 2016 | HEAVY-DUTY WIRING SYSTEMS FOR ON-HIGHWAY TRUCKS |
| SAE J 2139 : 2014 | TESTS FOR SIGNAL AND MARKING DEVICES USED ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 1128 : 2015 | LOW VOLTAGE PRIMARY CABLE |
| SAE J 2174 : 2015 | HEAVY-DUTY WIRING SYSTEMS FOR TRAILERS 2032 MM OR MORE IN WIDTH |
| SAE J 1455 : 2017 | RECOMMENDED ENVIRONMENTAL PRACTICES FOR ELECTRONIC EQUIPMENT DESIGN IN HEAVY-DUTY VEHICLE APPLICATIONS |
| SAE J 858 : 2011 | ELECTRICAL TERMINALS BLADE TYPE |
| SAE J 1908 : 2013 | ELECTRICAL GROUNDING PRACTICE |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| SAE J 726 : 2002 | AIR CLEANER TEST CODE |
| SAE J 2223/2 : 2011 | CONNECTIONS FOR ON-BOARD ROAD VEHICLE ELECTRICAL WIRING HARNESSES - PART 2: TESTS AND GENERAL PERFORMANCE REQUIREMENTS |
| SAE J 821 : 2003 | ELECTRICAL WIRING SYSTEMS FOR CONSTRUCTION, AGRICULTURAL, AND OFF-ROAD MACHINES |
| MIL-STD-1344 Revision A:1977 | TEST METHODS FOR ELECTRICAL CONNECTORS |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| SAE J 163 : 2011 | LOW TENSION WIRING AND CABLE TERMINALS AND SPLICE CLIPS |
| ISO 8090:1990 | Cycles — Terminology |
| SAE J 2223/1 : 2011 | CONNECTIONS FOR ON-BOARD ROAD VEHICLE ELECTRICAL WIRING HARNESSES - PART 1: SINGLE-POLE CONNECTORS - FLAT BLADE TERMINALS - DIMENSIONAL CHARACTERISTICS AND SPECIFIC REQUIREMENTS |
| SAE J 1067 : 2016 | SEVEN CONDUCTOR CABLE - TRUCK AND BUS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.