SAE J 183 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ENGINE OIL PERFORMANCE AND ENGINE SERVICE CLASSIFICATION (OTHER THAN 'ENERGY CONSERVING')
Hardcopy , PDF
01-08-2020
English
01-01-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. API ENGINE OIL LICENSING AND CERTIFICATION SYSTEM
4. NOTES
APPENDIX A - HISTORICAL ENGINE OIL PERFORMANCE AND ENGINE
OIL SERVICE CLASSIFICATION FOR API CATEGORIES
NO LONGER ACTIVE
Specifies the engine oil performance categories and classifications developed through the efforts of the Alliance of Automobile Manufacturers (Alliance), American Petroleum Institute (API), the American Society for Testing and Materials (ASTM), the Engine Manufacturers Association (EMA), International Lubricant Specification Advisory Committee (ILSAC) and SAE.
| Committee |
TC 1
|
| DocumentType |
Revision
|
| Pages |
100
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 5844 : 1998 | Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003) |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| API 1509 : 2002 | ENGINE OIL LICENSING AND CERTIFICATION SYSTEM |
| SAE J 312 : 2010 | AUTOMOTIVE GASOLINES |
| SAE J 313 : 2004 | DIESEL FUELS |
| ASTM D 5800 : 2015-04 | TEST METHOD FOR EVAPORATION LOSS OF LUBRICATING OILS BY THE NOACK METHOD |
| ASTM D 8048 : 2017-05 | TEST METHOD FOR EVALUATION OF DIESEL ENGINE OILS IN T-13 DIESEL ENGINE |
| SAE J 183 : 2016 | ENGINE OIL PERFORMANCE AND ENGINE SERVICE CLASSIFICATION (OTHER THAN 'ENERGY CONSERVING') |
| ASTM D 5480 : 1995 : R1999 : EDT 1 | Standard Test Method for Engine Oil Volatility by Gas Chromatography (Withdrawn 2003) |
| ASTM D 6681 : 2017 : REDLINE | Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure |
| ASTM D 4951 : 2014 : REDLINE | Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
| ASTM D 6922 : 2013-05 | TEST METHOD FOR DETERMINATION OF HOMOGENEITY AND MISCIBILITY IN AUTOMOTIVE ENGINE OILS |
| ASTM D 7468 : 2016 : REDLINE | TEST METHOD FOR CUMMINS ISM TEST |
| ASTM D 5133 : 2015 : REDLINE | Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique |
| ASTM D 6984 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE IIIF, SPARK-IGNITION ENGINE |
| ASTM D 7156 : 2017 : REDLINE | Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine |
| MIL-PRF-2104 Revision K:2016 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE |
| ASTM D 5967 : 2017 : REDLINE | Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
| SAE J 300 : 2015 | Engine Oil Viscosity Classification<br> |
| SAE J 304 : 2016 | ENGINE OIL TESTS |
| ASTM D 5481 : 2013 : REDLINE | Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer |
| ASTM D 6417 : 2015 : REDLINE | Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography |
| ASTM D 5968 : 2017 : REDLINE | TEST METHOD FOR EVALUATION OF CORROSIVENESS OF DIESEL ENGINE OIL AT 121 DEGREES C |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| SAE J 357 : 2016 | PHYSICAL AND CHEMICAL PROPERTIES OF ENGINE OILS |
| ASTM D 4485 : 2017-03 | SPECIFICATION FOR PERFORMANCE OF ACTIVE API SERVICE CATEGORY ENGINE OILS |
| ASTM D 6794 : 2014 : REDLINE | TEST METHOD FOR MEASURING THE EFFECT ON FILTERABILITY OF ENGINE OILS AFTER TREATMENT WITH VARIOUS AMOUNTS OF WATER AND A LONG (6 H) HEATING TIME |
| ASTM D 6837 : 2013 : REDLINE | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine<rangeref></rangeref > |
| SAE J 1297 : 2007 | ALTERNATIVE AUTOMOTIVE FUELS |
| ASTM D 6202 : 2002 | Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine (Withdrawn 2009) |
| SAE J 2227 : 2011 | INTERNATIONAL TESTS AND SPECIFICATIONS FOR AUTOMOTIVE ENGINE OILS |
| ASTM D 6618 : 2016 : REDLINE | Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine |
| ASTM D 7589 : 2016 : REDLINE | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref > |
| ASTM D 4683 : 2017 : REDLINE | Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C |
| ASTM D 7109 : 2013-04 | TEST METHOD FOR SHEAR STABILITY OF POLYMER CONTAINING FLUIDS USING A EUROPEAN DIESEL INJECTOR APPARATUS AT 30 AND 90 CYCLES |
| SAE J 1423 : 2015 | CLASSIFICATION OF ENERGY CONSERVING ENGINE OIL AND RESOURCE CONSERVING ENGINE OIL FOR PASSENGER CARS, VANS, SPORT UTILITY VEHICLES, AND LIGHT-DUTY TRUCKS |
| ASTM D 7320 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE 3G, SPARK-IGNITION ENGINE |
| ASTM D 6594 : 2014 : REDLINE | TEST METHOD FOR EVALUATION OF CORROSIVENESS OF DIESEL ENGINE OIL AT 135 DEGREES C |
| ASTM D 6891 : 2015 : REDLINE | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine |
| ASTM D 6483 : 2004 | Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.