SAE AS1182C
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Stock Removal Allowance Aircraft-Quality and Premium Aircraft-Quality Steel Bars and Mechanical Tubing
Available format(s)
Hardcopy , PDF
Superseded date
25-04-2020
Superseded by
Language(s)
English
Published date
03-10-2012
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. ADDITIONAL ALLOWANCE FOR LONG BARS AND TUBES
5. NOTES
Describes the aerospace industry with standards for minimum stock removal allowances for bars and mechanical tubing to provide surfaces which are free from decarburization, seams, laps, tears, cracks, pits, and other injurious surface imperfections.
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
The purpose of this document is to provide the aerospace industry with standards for minimum stock removal allowances for bars and mechanical tubing to provide surfaces which are free from decarburization, seams, laps, tears, cracks, pits, and other injurious surface imperfections.
| SAE AMS5925A | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 15.5Cr - 1.8Mo - 0.20N (0.37 - 0.45C) Electroslag Remelted |
| SAE AMS6276L | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Consumable Electrode Vacuum Remelted |
| SAE AMS5932B | Steel, Corrosion and Heat-Resistant, Bars, Forgings and Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb(Nb) Carburizing, Premium Aircraft-Quality, Double Vacuum Melted |
| SAE AMS6299F | Steel Bars, Forgings, and Tubing, Carburizing 0.50Cr - 1.8Ni - 0.25Mo (0.17 - 0.23C) (SAE 4320H) |
| SAE AMS6263M | Steel Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (9315) |
| SAE AMS6422K | Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40) |
| SAE AMS6370P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS6409E | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Special Aircraft Quality Cleanliness Normalized and Tempered |
| SAE AMS5937 | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 2Mo 1.5Al 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS6330J | Steel Bars, Forgings, and Tubing 0.65Cr - 1.25Ni (0.33 – 0.38C) |
| SAE AMS5935 | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 10Ni - 2Mo - 0.9Al - 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE MAM6304B | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95cr 0.55mo 0.30v (0.40-0.50c) |
| SAE AMS6527F | Steel, Bars and Forgings 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged |
| SAE AMS6328N | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.48 to 0.53C) (8750) |
| SAE AMS6274R | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) |
| SAE AMS6257F | Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Normalized and Tempered |
| SAE AMS5624F | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished |
| SAE AMS6519D | Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Premium Aircraft Quality Double Vacuum Melted, Annealed |
| SAE AMS6282J | Steel Tubing, Mechanical 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) |
| SAE AMS6492A | Steel Bars, Forgings, and Tubing 1.0Cr - 3.25Ni - 0.40Mo (0.17 - 0.22C) Aircraft Quality |
| SAE AMS6516B | Steel, Bars and Forgings 1Cr – 10Ni – 7Co – 2Mo – 1.3W – 0.1V – (0.28 – 0.32C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized and Annealed Precipitation Hardenable |
| SAE AMS6302K | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C) |
| SAE AMS6528D | Steel, Bars 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized |
| SAE AMS5955B | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 10Cr - 12Ni - 2Mo - 1.45Al - 1.15Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS6443G | Steel Bars, Forgings, and Tubing, 1.0Cr (0.98 - 1.10C) (SAE 51100), Consumable Electrode Vacuum Melted |
| SAE AMS5631F | Steel, Corrosion-Resistant, Bars and Forgings 17Cr (0.60 - 0.75C) (440A) |
| SAE AMS6558 | Steel, Bars, Wire, and Forgings 10.5 Mo - 6 W - 3.75 Cr - 2 V (1.25 - 1.40 C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS6514J | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed |
| SAE AMS5900B | Steel Bars, Forgings, and Tubing, Corrosion Resistant 14Cr - 2.1Mo - 0.30Cb - 1.0V (1.05 - 1.15C) Premium Aircraft Quality for Bearing Applications, Double Vacuum Melted |
| SAE AMS6280M | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.20Mo (0.28 – 0.33C) (SAE 8630) |
| SAE AMS6412N | Steel, Bars and Forgings 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) |
| SAE AMS6378G | Steel Bars 1.0Cr - 0.20Mo - 0.45Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield Strength Free Machining |
| SAE AMS6475K | Steel, Nitriding, Bars, Forgings, and Tubing 1.1Cr – 3.5Ni – 0.25Mo – 1.2Al (0.21 – 0.26C) |
| SAE AMS6413M | Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) |
| SAE AMS6548 | Steel Bars, Forgings, and Tubing 1.0Cr – 3.2Ni – 0.2Mo (0.12 – 0.17C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted |
| SAE AMS5640V | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining |
| SAE MAM6415C | Steel, Bars, Forgings, and Tubing, 0.80cr 1.8ni 0.25mo (0.38 0.43) |
| SAE AMS5611F | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Consumable Electrode Melted |
| SAE AMS6551 | Steel Bars, Forgings and Tubing 1.75 Cr – 4.0 Ni – 0.5 Mo – (0.35–0.40 C) Premium Aircraft Quality Consumable Electrode Vacuum Remelted |
| SAE AMS6427M | Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) |
| SAE AMS6547 | Steel Bars, Forgings, and Tubing 1.0Cr - 3.2Ni - 0.2Mo (0.12 – 0.17C) Aircraft-Quality |
| SAE AMS6411J | Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) Consumable Electrode Remelted |
| SAE AMS5625E | Steel Bars, High Expansion 9.5Ni - 5.5Mn (0.55 - 0.65C) Cold Finished |
| SAE AMS6491E | Steel Bars, Forgings, and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted |
| SAE AMS6426F | Steel Bars, Forgings, and Tubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C) Consumable Electrode Vacuum Melted |
| SAE AMS5655F | Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20-0.25C) Hardened and Tempered |
| SAE AMS6447H | Steel, Bars, Forgings, and Tubing 1.4Cr (0.93-1.05C) (SAE 52100) Electroslag Remelted |
| SAE AMS6479D | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93-1.05C) (SAE 52100) Special Aircraft-Quality Cleanliness |
| SAE AMS6432C | Steel Bars, Forgings, and Tubing, 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.43 - 0.49C) |
| SAE AMS6511A | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18Ni - 8.5Co - 3.2Mo - 0.20Ti - 0.10Al Double Vacuum Melted, Annealed |
| SAE AMS5926 | Steel, Corrosion-Resistant, Bars, Wire, Tubing, and Forgings 15.5Cr – 1.5Si – 0.3Mo – 0.1N (0.45 – 0.60C) for Bearing Applications |
| SAE AMS6470N | Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod) |
| SAE AMS6300G | Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037) |
| SAE AMS6494B | Steel Bars, Forgings, and Tubing 1.0Cr – 2.50Ni – 2.0Mo – 1.10Si (0.10 – 0.20C) Aircraft-Quality |
| SAE AMS5618J | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C) Consumable Electrode Vacuum Melted |
| SAE AMS6417H | Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted |
| SAE AMS 5931 : 2012 | STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED |
| SAE AMS6478B | Steel, Bars and Forgings, 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C), Vacuum Melted, Annealed, Heat Treatable to 290 ksi (1999 MPa) Tensile Strength |
| SAE AMS6264L | Steel, Carburizing Grade, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.14 - 0.20C) (9317) |
| SAE AMS6340B | Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 – 0.33C) (4330 Mod) Consumable Electrode Vacuum Remelted |
| SAE AMS6348D | Steel, Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Normalized |
| SAE AMS5620G | Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 13Cr (0.30 - 0.40C) (SAE 51420F, 51420FSe) Free-Machining Grade |
| SAE AMS6278E | Steel, Bars, Forgings, and Tubing 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted |
| SAE AMS6327L | Steel Bars and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS6493A | Steel Bars, Forgings, and Tubing 1.0Cr - 3.25Ni - 0.40Mo (0.17 - 0.22C) Electroslag Remelted or Consumable Electrode Vacuum Remelted Premium Aircraft-Quality |
| SAE AMS6304M | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) |
| SAE AMS6320P | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.33 – 0.38C) (8735) |
| SAE AMS5749F | Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted |
| SAE AMS6484E | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Normalized and Tempered |
| SAE AMS5938A | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 10Cr - 12Ni - 2Mo – 1.45Al – 1.15Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5898B | Steel, Corrosion Resistant, Bars, Wire, and Forgings 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure |
| SAE AMS6323M | Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) |
| SAE AMS6477C | Steel, Bars, Forgings, and Tubing 0.80Cr (0.90 – 1.03C) For Bearing Applications |
| SAE AMS6509A | Steel Bars and Forgings 3.5Cr – 7.5Ni – 16.3Co – 1.75Mo – 0.2W – (0.09 - 0.13C) Double Vacuum Melted, Normalized, Annealed |
| SAE AMS6539 | Steel Bars, Forgings, and Tubing 1.7Cr – 3.8Ni – 0.3Mo (0.32 – 0.38 C) Aircraft-Quality |
| SAE AMS6292J | Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.15 - 0.20C) (SAE 4617) |
| SAE AMS6324J | Steel Bars, Forgings, and Tubing 0.65Cr - 0.70Ni - 0.25Mo (0.38 – 0.43C) (8740 Modified) |
| SAE AMS6415U | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) |
| SAE AMS6490H | Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted |
| SAE AMS6381J | Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) |
| SAE AMS6414M | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted |
| SAE AMS6517A | Steel, Bars, and Forgings 3.5Cr - 9.5Ni - 18Co - 1.1Mo (0.13 – 0.17C) Double Vacuum Melted, Normalized, Annealed |
| SAE AMS5632J | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (440F) Free-Machining, Annealed |
| SAE AMS6270Q | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.13 - 0.18C) (SAE 8615) |
| SAE AMS5635G | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated |
| SAE AMS6346B | Steel Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Hardened and Tempered, 125 Ksi (862 MPa) Tensile Strength |
| SAE AMS6303J | Steel Bars and Forgings, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C) |
| SAE AMS6277H | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted |
| SAE AMS6267J | Steel Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (9310) Electroslag Remelted or Consumable Electrode Vacuum Remelted |
| SAE AMS5929 | Steel, Corrosion-Resistant, Bars and Forgings 11.5Cr -10Ni - 1.0Al - 0.5Ti - 1.0Cu - 1.0W Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS6281J | Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630) |
| SAE AMS6444M | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 – 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted |
| SAE AMS6497A | Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Electroslag Remelted or Consumable Electrode Vacuum Remelted Premium Aircraft-Quality for Bearing Applications |
| SAE AMS6255F | Steel Bars, Forgings, and Tubing 1.1Si - 1.45Cr - 1.0Mo - 0.08Al (0.16 - 0.22C) Double Vacuum Melted |
| SAE AMS6294J | Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.17 - 0.22C) (SAE 4620) |
| SAE AMS6429H | Steel Bars, Forgings, Tubing, and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Consumable Electrode Vacuum Melted |
| SAE AMS5621G | Steel, Corrosion Resistant, Bars, Wire, and Forgings 13Cr (0.30–0.40C) (51420) Annealed |
| SAE AMS6482A | Steel Bars, Forgings, and Tubing 1.5Si - 1.25Cr - 3.8Ni - 0.50Mo - 0.30V (0.40C) Vacuum Remelted Annealed |
| SAE AMS5612J | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Annealed |
| SAE AMS6260S | Steel, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.07 - 0.13C) (9310) |
| SAE AMS6499A | Steel, Bars, Forgings, and Tubing 2.7Si - 0.85Cr - 1.8Ni - 0.4Mo - 0.2V - (0.37 - 0.44C) Double Vacuum Melted |
| SAE AMS6512H | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed |
| SAE AMS6549 | Steel Bars, Forgings, and Tubing 1.0Cr – 3.2Ni - 0.2Mo (0.12 – 0.17C) Premium Aircraft-Quality Double Vacuum Melted |
| SAE AMS6308E | Steel, Bars and Forgings 0.90Si - 1.0Cr - 2.0Ni - 3.2Mo - 2.0Cu - 0.10V (0.07 - 0.13C) Vacuum Arc or Electroslag Remelted |
| SAE AMS6515A | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 12.0Co - 4.9Mo - 1.40Ti - 0.10Al Double Vacuum Melted, Annealed |
| SAE AMS6430J | Steel, Bars, Forgings, Tubing, and Rings 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 – 0.38C) (4335 Modified) |
| SAE AMS6372N | Steel, Mechanical Tubing 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135) |
| SAE AMS6382P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed |
| SAE AMS6317K | Steel Bars and Forgings 1.8Ni - 0.25Mo (0.38 – 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS6496A | Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Aircraft-Quality for Bearing Applications |
| SAE AMS6272M | Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617) |
| SAE AMS6423H | Steel Bars, Forgings, and Tubing 0.92Cr – 0.75Ni – 0.52Mo – 0.003B – 0.04V (Modified 98BV40) |
| SAE AMS6312J | Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) |
| SAE AMS6325K | Steel, Bars, and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 105 ksi (724 MPa) Tensile Strength |
| SAE AMS5623D | Steel Bars and Forgings, High Expansion 9.5No - 5.5Mn (0.55 - 0.65C) Annealed |
| SAE AMS6525E | Steel, Bars, Forgings, Tubing, and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted |
| SAE AMS6419H | Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C) Consumable Electrode Vacuum Remelted |
| SAE AMS6250M | Steel Bars, Forgings, and Tubing 1.5Cr - 3.5Ni (0.07 - 0.13 C) (3310) |
| SAE AMS6529D | Steel, Bars 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Special Aircraft-Quality Cleanliness Normalized |
| SAE AMS6448L | Steel, Bars, Forgings, and Tubing 0.95Cr - 0.22V (0.48 – 0.53C) (SAE 6150) |
| SAE AMS6543F | Steel, Bars and Forgings 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted Solution Heat Treated, Marage Hardenable |
| SAE AMS6305G | Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted |
| SAE AMS6424G | Steel Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 – 0.55C) |
| SAE AMS6532F | Steel, Bars and Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitaiton Hardenable |
| SAE AMS6290J | Steel, Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.11 - 0.17C) (SAE 4615) |
| SAE AMS 5718E : 2016 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED |
| SAE AMS5933 | Steel, Corrosion Resistant Bars and Forgings 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted |
| SAE AMS6560 | Steel Bars, Wire and Forgings 10 Co - 7 Mo - 6 V - 6 W - 4 Cr (2.2 – 2.4C) Premium Aircraft-Quality for Bearing Applications Inert Gas Atomized and Hot Isostatically Pressed Consolidated |
| SAE AMS6481D | Steel Bars, Forgings, and Tubing, Nitriding 3Cr - 1Mo - 0.2V - (0.29 - 0.36C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted |
| SAE AMS6342K | Steel Bars, Forgings, and Tubing 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840) |
| SAE AMS6421G | Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37) |
| SAE AMS6408E | Steel, Hotwork Tool, Bars and Forgings 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) (H-13) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed |
| SAE AMS6498A | Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Double Vacuum Melted Premium Aircraft-Quality for Bearing Applications |
| SAE AMS5923 | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 – 1.20C) (440C) for Bearing Applications |
| SAE AMS6425D | Steel, Bars, Forgings, and Tubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Consumable Electrode Vacuum Melted |
| SAE AMS5922B | Steel, Corrosion-Resistant, Bars, and Forgings 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed |
| SAE AMS5930B | Steel, Corrosion-Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted |
| SAE AMS5630L | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C) |
| SAE AMS6495B | Steel Bars, Forgings, and Tubing 1.0Cr – 2.50Ni – 2.0Mo – 1.10Si (0.10 – 0.20C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted |
| SAE AMS6407K | Steel, Bars, Forgings, and Tubing 1.2Cr - 2.0Ni - 0.45Mo (0.27 – 0.33C) |
| SAE AMS6431P | Steel, Bars, Forgings, and Tubing 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) (D6AC) Vacuum Consumable Electrode Remelted |
| SAE AMS6322P | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) |
| SAE AMS5773E | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation Hardenable |
| SAE AMS6265P | Steel, Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (9310) Vacuum Consumable Electrode Remelted |
| SAE AMS5899B | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) Powder Metallurgy Product, Hot Isostatically Pressed |
| SAE AMS6349E | Steel Bars 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized |
| SAE AMS6487L | Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted |
| SAE AMS6557 | Steel, Bars, Wire, and Forgings 9V - 5.25Cr - 1.3Mo (1.80 – 1.95C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS5616M | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 13Cr - 2.0Ni - 3.0W Annealed |
| SAE AMS6440S | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) For Bearing Applications |
| SAE AMS6559 | Steel, Bars, Wire, and Forgings 9.75 V - 5.25 Cr - 1.3 Mo (2.40 – 2.55 C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS6371L | Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS6471H | Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod) Consumable Electrode Vacuum Melted |
| SAE AMS5719D | Steel Bars, Wire, Forgings, Tubing, Rings, and Extrusions, Corrosion-Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed, Vacuum Arc or Electroslag Remelted |
| SAE AMS6556 | Steel, Bars, Wire, and Forgings 8V - 4Cr - 4W - 3Mo (2.45 – 2.55C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS6428K | Steel, Bars, Forgings, and Tubing 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 Mod) |
| SAE AMS6472F | Steel, Bars and Forgings, Nitriding 1.6Cr - 0.35Mo - 1.1Al (0.38 - 0.43C) (135 Mod) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength |
| SAE AMS5609E | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 12Cr - 0.12Cb (Nb) (410 Modified) Ferrite Controlled, Annealed |
| SAE AMS5612K | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings, 12Cr Ferrite Controlled, Annealed |
| SAE AMS6475L | Steel, Nitriding, Bars, Forgings, and Tubing 1.1Cr - 3.5Ni - 0.25Mo - 1.2Al (0.21 - 0.26C) |
| SAE AMS5933A | Steel, Corrosion Resistant Bars and Forgings 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted |
| SAE AMS5922C | Steel, Corrosion-Resistant, Bars, and Forgings 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed |
| SAE AMS6491F | Steel Bars, Forgings, and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted |
| SAE AMS2241S | Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire |
| SAE AMS2251H | Tolerances Low-Alloy Steel Bars |
| SAE AMS2253E | Tolerances Carbon and Alloy Steel Tubing |
| SAE AMS2243K | Tolerances Corrosion and Heat-Resistant Steel Tubing |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.