SAE AS1576E
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fittings, Welded, Hydraulic, Titanium, Corrosion Resistant Steel and Nickel, 3000 psi Hydraulic
Hardcopy , PDF
07-04-2020
English
13-07-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
APPENDIX A - NITRIC-HYDROFLUORIC ACID ETCH
OF TITANIUM ALLOYS
Describes the requirements for weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3Al-2.5V titanium, 21Cr-6Ni-9Mn CRES, and 718 nickel alloy tubing.
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This document defines the requirements for weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3Al-2.5V titanium, 21Cr-6Ni-9Mn CRES, and 718 nickel alloy tubing. Fitting standards covered by this specification include non-separable welded elbow, tee, and reducer fittings, and reconnectable 24 degree cone fittings such as sleeves and unions.
| SAE AIR5426 | Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance of |
| SAE AS85421A | Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 psi, General Specification For |
| SAE AS18280/2A | Sleeves, Internally or Externally Swaged or Welded, 24° Cone Flareless Fitting, 3000 psi |
| SAE AIR310A | Fittings, Catalog of Flared, Flareless, Pipe Threaded, Port, Hose, and Other Type Tube Standard Connectors |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| SAE AS4695C | SLEEVE, TUBE END, ACORN TO WELD, SHORT FLARELESS |
| SAE AMS5659S | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu |
| SAE AMS5663N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated |
| SAE AS1583E | FITTING, TEE, INTEGRAL WELD RING, 3000 PSI |
| SAE AS5863 | FITTING END, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD |
| SAE AS4696A | FITTING, SLEEVE, FLARELESS, NONREDUCER AND REDUCER, SHORT ACORN TO WELD TUBE END |
| SAE AMS5662N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable |
| SAE AS603B | Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies |
| NAS1760:2015 | FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR |
| SAE AMS5656F | Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, and Rings 9.0Mn - 20Cr - 6.5Ni - 0.27N Solution Heat Treated |
| SAE AS4693D | UNION, TUBE END, EXTERNAL THREAD TO WELD, SHORT FLARELESS |
| SAE AMS5561G | Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic |
| SAE ARP1185B | Flexure Testing of Hydraulic Tubing Joints and Fittings |
| SAE AMS2759/3F | Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts |
| SAE AS1582F | FITTING, ADAPTER, EXTERNAL THREAD FLARELESS TO INTEGRAL WELD RING, 3000 PSI |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AS1585F | FITTING, REDUCER, INTEGRAL WELD RING, 3000 PSI |
| SAE AS1579D | FITTING END, INTEGRAL WELD, LIP, DESIGN STANDARD |
| AWS A3.0 : 0 | STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
| SAE AMS4945F | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AS1577B | TUBE END, WELD DESIGN STANDARD |
| SAE AS18280E | Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi |
| SAE AMS5589F | Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated |
| SAE AS5234 | NUT, COUPLING FLARELESS |
| SAE AS1581D | FITTING, SLEEVE, FLARELESS ACORN TO INTEGRAL WELD RING, 3000 PSI |
| SAE AMS4946E | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress Relieved |
| SAE AS1584E | FITTING, ELBOW, 90 DEGREE, INTEGRAL WELD RING, 3000 PSI |
| SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| SAE AS1893E | RING, WELD 3000 PSI, CRES |
| SAE ARP4784A | Definitions and Limits, Metal Material Defects and Surface and Edge Features, Fluid Couplings, Fittings and Hose Ends |
| SAE AS478N | Identification Marking Methods |
| SAE AS5233A | FITTING ASSEMBLY, CAP, FLARELESS |
| O-H-795 Base Document:1953 | HYDROFLUORIC ACID, TECHNICAL |
| SAE AMST6845B | Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition |
| SAE AS2094A | Test Methods for Tube-Fitting Assemblies |
| SAE ARP9013 | Statistical Product Acceptance Requirements |
| SAE AS1580E | RING, WELD 3000 PSI, TITANIUM |
| SAE AMS4928V | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.