SAE ARP 598 : 2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
AEROSPACE MICROSCOPIC SIZING AND COUNTING OF PARTICULATE CONTAMINATION FOR FLUID POWER SYSTEMS
Hardcopy , PDF
28-10-2019
English
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. OUTLINE OF METHOD
4. MATERIALS
5. APPARATUS
6. REAGENTS
7. PREPARATION OF APPARATUS
8. LIQUID SAMPLES
9. FILTRATION PROCEDURE
10. MICROSCOPE CALIBRATION
11. PARTICLE COUNTING PROCEDURE
12. PARTICLE COUNT CALCULATION
13. COUNTING PROFICIENCY
14. DISPUTE CLAUSE
15. KEY WORDS
16. NOTES
APPENDIX A - CALIBRATION OF MICROSCOPE OCULAR SCALE
APPENDIX B - ARP598 FLUID CLEANLINESS DATA SHEET
Specifies the materials, apparatus and procedure for sizing and counting of particulate contamination, 5 [mu]m or greater, in hydraulic fluid samples by membrane filtration with microscopic counting.
| Committee |
A-6C1
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
SAE International
|
| Status |
Withdrawn
|
| Supersedes |
| MIL V 81940 : B | VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS |
| MIL-STD-1246 Revision C:1994 | PRODUCT CLEANLINESS LEVELS AND CONTAMINATION CONTROL PROGRAM |
| SAE AS 4775 : 2017 | AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS |
| AAMI AT6 : 2013 | AUTOLOGOUS TRANSFUSION DEVICES |
| ISO 9940:2015 | Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
| SAE ARP 1953 : 2014 | ACCEPTANCE TEST PROCEDURES AND STANDARDS TO ENSURE CLEAN FUEL SYSTEM COMPONENTS |
| ASTM G 93 : 2003 : R2011 | Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments |
| MIL V 24630 : 0 | VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID |
| MIL-H-5440 Revision H:1993 | HYDRAULIC SYSTEMS, AIRCRAFT, TYPES 1 AND 11 DESIGN AND INSTALLATION REQUIREMENTS FOR |
| SAE ARP 4945 : 2013 | AEROSPACE-SOLENOID VALVE, HYDRAULIC, THREE WAY, TWO POSITION, DIRECT ACTING |
| AAMI BF7 : 2012 | BLOOD TRANSFUSION MICROFILTERS |
| SAE AIR 560 : 2007 | MISSILE HYDRAULIC PUMPS |
| SAE AIR 81 : 2016 | IMPORTANCE OF PHYSICAL AND CHEMICAL PROPERTIES OF AIRCRAFT HYDRAULIC FLUIDS |
| SAE AIR 4728 : 2013 | REFERENCES, SPACECRAFT AND SPACECRAFT SERVICING, FLUID SYSTEM COMPONENTS (ABBREVIATIONS, ACRONYMS, DEFINITIONS, APPLICABLE DOCUMENTS AND ENVIRONMENTAL CONDITIONS) |
| SAE ARP 1281 : 2002 | ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
| SAE ARP 599 : 2013 | AEROSPACE - DYNAMIC TEST METHOD FOR DETERMINING THE RELATIVE DEGREE OF CLEANLINESS OF THE DOWNSTREAM SIDE OF FILTER ELEMENTS |
| NASA RPTSTD 8070 0001 : 2010 CHANGE 2 2013 | SURFACE CLEANLINESS STANDARD OF FLUID SYSTEMS FOR ROCKET ENGINE TEST FACILITIES OF THE NASA ROCKET PROPULSION TEST PROGRAM |
| NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
| NASA MSFC PROC 166 : 1965 | HYDRAULIC SYSTEM DETAILED PARTS, COMPONENTS, ASSEMBLIES, AND HYDRAULIC FLUIDS FOR SPACE VEHICLES, CLEANING, TESTING, AND HANDLING |
| NASA PRC 5001 : 2011 | PROCESS SPECIFICATION FOR CLEANING OF HARDWARE |
| ANSI B93.30M : 80(R1993) | CONTAMINATION ANALYSIS DATA OF HYDRAULIC FLUID POWER SYSTEMS, METHOD OF REPORTING, |
| SAE ARP 5941 : 2014 | AEROSPACE FLUID POWER - CONTAMINATION SENSITIVITY - CONSIDERATIONS FOR ESTABLISHING TEST PROCEDURES FOR FLIGHT CONTROL ACTUATORS |
| BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
| SAE ARP 4386 : 2017 | TERMINOLOGY AND DEFINITIONS FOR AEROSPACE FLUID POWER, ACTUATION AND CONTROL TECHNOLOGIES |
| ARP1176A : 2013(R2018) | OXYGEN SYSTEM AND COMPONENT CLEANING |
| SAE ARP 1070E : 2019 | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
| SAE ARP 1070 : 2014 | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
| ASTM G 93 : 2003 : EDT 1 | Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments |
| MIL F 81836 : A SUPP 1 | FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE |
| A-A-59150 Revision A:1998 | CLEANING COMPOUND, SOLVENT, HYDROFLUOROETHER (HFE) |
| SAE AIR 887 : 2013 | LIQUID FILTER RATINGS, PARAMETERS AND TESTS |
| SAE ARP1070E:2019(R2024) | Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility |
| SAE ARP 5376 : 2010 | METHODS, LOCATIONS AND CRITERIA FOR SYSTEM SAMPLING AND MEASURING THE SOLID PARTICLE CONTAMINATION OF HYDRAULIC FLUIDS |
| NAS1638:2011 | CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS |
| SAE ARP 4285 : 2001 | AEROSPACE - EVALUATION OF PARTICULATE CONTAMINATION IN HYDRAULIC FLUID - MEMBRANE PROCEDURE |
| SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.