
SAE AMS6322P
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by

Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)
Hardcopy , PDF
English
05-06-2014
03-01-2016
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTION
8. NOTES
Specifies an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
DevelopmentNote |
Supersedes MIL S 6049 (09/2002) Supersedes SAE AMS S 6049. (07/2006)
|
DocumentType |
Standard
|
Pages |
7
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
Standards | Relationship |
MIL-S-6049 Revision A:1967 | Similar to |
SAE AMS6327L | Steel Bars and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125 ksi (862 MPa) Tensile Strength |
17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
SAE AS7452B | Bolts and Screws, Steel, Low Alloy Heat Treated, Roll Threaded |
MIL R 007885 : C SUPP 1 | RIVETS; BLIND, STRUCTURAL, LOCKED AND FRICTION RETAINED SPINDLE, GENERAL SPECIFICATION FOR |
SAE AS45909A | Stud, Locked In, Ring Locked, Serrated, General Specification For |
MIL-DTL-7885-12 Base Document:1996 | Rivets, Blind, Structural, 100 Degree Flush Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle, (Type I, Style A, Class 2) (S/S by NAS9302) |
MIL-DTL-7885-11 Base Document:1996 | Rivets, Blind, Structural, Universal, Protruding Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle (Type I, Style A, Class 1) (S/S by NAS9301) |
MIL-DTL-7885-28 Base Document:1996 | Rivets, Blind, Structural, Flanged Dome Head, 5056 AL Alloy Sleeve, Mechanically Locked 8740 Alloy Steel Spindle, Oversize Diameter (Type I, Style B, Class 4) (S/S by NAS9306) |
MIL-S-45909 Revision C:1989 | STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (S/S BY NASM45909) |
MIL-DTL-7885-27 Base Document:1996 | Rivets, Blind, Structural, 100 Degree Flush Shear Head, 5056 AL Alloy Steel Spindle, (Type I, Style A, Class 3) (S/S by NAS9303) |
MS21025 Revision F:1996 | NUT, CASTELLATED, HEXAGON (S/S BY NASM21025) |
MIL-S-45915 Revision A:1967 | STUD, LOCKED IN - KEY LOCKED, GENERAL SPECIFICATION FOR (S/S BY NASM45915) |
MIL-DTL-83454 Revision B:2016 | Terminals, Stud, Blind Plate, for Electrical Bonding and Grounding (Noninsulated) |
MIL-STD-1876 Revision A:1991 | Nitriding, Gaseous Atmosphere Processing for (No S/S Document) |
10/30227763 DC : 0 | BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
SAE MA1573A | Nut, Self-Locking - Steel, Class 1100 MPa/235 °C, MJ Thread Procurement Specification For, Metric |
MIL-DTL-45932 Revision A:2015 | Insert, Screw Thread, Thin Wall, Locked in: General Specification for |
10/30227764 DC : 0 | BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
DOD-N-70333 Base Document:1985 | Nut, Plain and Self-Locking, Clinch, Metric (Self-Clinching, Knurled Collar) Fixed and Floating, General Specification for (No S/S Document) |
MIL-I-45914 Revision A:1991 | Insert, Screw Thread - Locked in, Key Locked, General Specification for |
DOD-S-63543 Base Document:1982 | Stud and Rod, Threaded, Metric, General Specification for (No S/S Document) |
SAE AS 7252 : 2015 | NUTS, SELF-LOCKING, STEEL HIGH STRENGTH, ALL METAL 450 DEGREES F USE, UN AND UNJ THREAD FORM |
DOD-S-63275 Revision A:1982 | Stud, Screw Thread, Locked in, Ring Locked, Serrated, Metric and Ring, Lock, Serrated, Metric, General Specification for (No S/S Document) |
SAE AS 7456 : 2016 | STUDS, STEEL, LOW ALLOY, HEAT TREATED, ROLL THREADED |
MIL-DTL-8789 Revision G:2015 | Fitting End, Attachable, Hydraulic, High Pressure (3,000 PSI), General Specification for |
MIL-R-7885 Revision D:1988 | Rivets, Blind, Structural, Mechanically LockedSpindleand Friction Locked Spindle, General Specification for |
DOD-I-63276 Revision A:1983 | Insert, Screw Thread, Locked in, Ring Locked, Serrated, Metric, General Specification for |
SAE AS269J | Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts |
AN103901THRUAN104000 Revision 3:1986 | BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24 |
SAE MA3376C | Bolts & Screws, UNS G87400 Tensile Strength 860 MPa & 1000 MPa Procurement Specification, Metric |
SAE AMS2372G | Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings |
SAE AMS2370L | Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock |
ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
SAE AMS2251H | Tolerances Low-Alloy Steel Bars |
SAE AMS 2806D : 2013 | IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS |
SAE AMS2301K | Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure |
SAE AS1182C | Standard Stock Removal Allowance Aircraft-Quality and Premium Aircraft-Quality Steel Bars and Mechanical Tubing |
SAE AMS 7496 : 2012 | RINGS, FLASH WELDED CARBON AND LOW-ALLOY STEELS |
ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
ASTM E 381 : 2017 : REDLINE | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
SAE AMS2808E | Identification Forgings |
SAE AMS2259E | Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.