SAE AMS2645K
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
FLUORESCENT PENETRANT INSPECTION
Available format(s)
Hardcopy , PDF
Withdrawn date
01-02-1995
Language(s)
English
Published date
01-02-1995
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
SAE International
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| MIL I 6866 : B | Similar to |
| SAE AMS4222H | ALUMINUM ALLOY CASTINGS, SAND, MODERATE HEAT RESISTANCE 4.0CU - 2.0NI - 1.5MG - 0.12TI (242.0P) SOLUTION HEAT TREATED AND STABILIZED |
| SAE MA 4368 : 2018 | NUT, PLAIN ROUND - SPANNER WRENCHING, SHAFT MOUNTED, UNS S66286, PROCUREMENT SPECIFICATION FOR, METRIC |
| MIL-C-27505 Revision B:1967 | Cartridge, Engine Starter MXU-4A/A |
| SAE MA 1568 : 2018 | NUT, SELF LOCKING - UNS S66286, 425 DEGREE C AND 650 DEGREE C, 1100 MPA, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AS 7330 : 2012 | RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT STEEL PROCUREMENT SPECIFICATION FOR |
| SAE MA 4070 : 2013 | PINS, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE MA1943A | NUTS, SELF-LOCKING, UNS N07001, 760 DEGREE C, 1100 MPA AND 1210 MPA, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AS 1177 : 2018 | NONDESTRUCTIVE INSPECTION STANDARDS FOR BOLTS AND SCREWS |
| SAE MA4189A:2021 | SCREW, MACHINE, 100° CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS, FULL SHANK, UNS S66286, MJ THREAD, METRIC |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| SAE MA 3399 : 2012 | CLAMP - TUBE SUPPORT, SPRING CLIPS AND PTFE CUSHION PROCUREMENT SPECIFICATION FOR |
| SAE AMS 2680 : 2010 | ELECTRON-BEAM WELDING, FOR FATIGUE CRITICAL APPLICATIONS |
| SAE MAM4427A | Magnesium Alloy Sand Castings 4.0y 2.3nd 0.7zr Solution and Precipitation Heat Treated |
| SAE AMS2689B | FUSION WELDING TITANIUM AND TITANIUM ALLOYS |
| SAE MA 1784 : 2012 | SPACERS AND WASHERS, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS4227E | ALUMINUM ALLOY, CASTINGS SAND, 8.0CU 6.0MG 0.50MN 0.50NI, AS CAST |
| SAE AMS4420P | MAGNESIUM ALLOY CASTINGS, SAND, 6AL - 3ZN (AZ63A-F), AS CAST |
| SAE MA 1937 : 2018 | NUT, HEX, FREE RUNNING, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS5373E | ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 16CO - 29CR - 4.5W, AS CAST, UNS R30006 |
| SAE AMS5328E | STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.28 - 0.36C) (SAE 4330 MODIFIED), ANNEALED |
| SAE AMS4146G | ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061 - T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE MA 2538 : 2015 | GASKET, METAL C-RING SEAL NICKEL ALLOY, CORROSION AND HEAT RESISTANT, METRIC PROCUREMENT SPECIFICATION FOR |
| SAE AMS5351G | STEEL CASTINGS, SAND, CORROSION AND MODERATE HEAT RESISTANT, 13CR, NORMALIZED AND TEMPERED |
| SAE AMS5358D | STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 18CR - 9NI, SOLUTION HEAT TREATED |
| SAE MA 4036 : 2012 | RINGS, RETAINING - TAPERED WIDTH, UNIFORM THICKNESS CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS 5412 : 2012R(2018) | STEEL CASTINGS, VACUUM MELTED, VACUUM CAST, INVESTMENT, CORROSION RESISTANT 13CR - 8.0NI - 2.2MO - 1.1AI (195,000 PSI (1344 MPA) TENSILE STRENGTH (CONDITION H1000) HOMOGENIZED, SOLUTION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 7482 : 1995 | STUDS - STEEL, CORROSION AND HEAT RESISTANT,ROLL THREADED AFTER HEAT TREATMENT, 1800F (980 C) SOL HEAT TREATED |
| FAA AC 33-6 : 2017 | WELD REPAIR OF ALUMINUM CRANKCASES AND CYLINDERS OF PISTON ENGINES |
| MIL-Q-22631 Revision B:1964 | QUALITY CONTROL OF METAL WROUGHT PRODUCTS EXCEPT FORGINGS PROCURED TO NON-GOVERNMENTAL SPECIFICATIONS |
| SAE AMS5348C | STEEL CASTINGS, TUBULAR, CENTRIFUGAL, CORROSION RESISTANT, 15CR - 4.6NI - 0.22 (CB+TA) - 2.8CU, SOLUTION HEAT TREATED |
| SAE AMS5409A | Castings, Alloy-Investment, 61ni 16cr 8.5co 1.8mo 2.6w 0.8cb 3.4ti 1.8ta 3.4al 0.010b 0.06zr (0.03-0.08c), Vacuum Melted, Vacuum Cast, as Cast |
| SAE AMS4231G | CASTINGS, SAND - 4.5CU - 1.1SI, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS5341D | STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 19.5CR - 10.5NI - 0.25S (TYPE 303), SOLUTION HEAT TREATED |
| SAE MA 4035 : 2012 | RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE MAM4247B | Aluminum Alloy, Hand Forgings 7.7zn 2.4mg 1.6cu 0.16cr (7049-T7352) Solution Heat Treated, Stress Relieved By Compression, and Precipitation Heat Treated |
| SAE AMS5384F | ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT, 53NI - 18CR - 18CO - 4.0MO - 2.9TI - 2.9AL - 0.006B, VACUUM-MELTED, VACUUM-CAST, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4240G | CASTINGS, SAND - 10MG, SOLUTION HEAT TREATED & NATURALLY AGED |
| SAE MAM4248B | Aluminum Alloy, Hand Forgings and Rolled Rings 1.0mg 0.60si 0.28cu 0.20cr Solution Heat Treated, Stress Relieved By Compression, and Precipitation Heat Treated |
| SAE AMS5571J | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE J426_201801 | LIQUID PENETRANT TEST METHODS |
| SAE AMS5330E | STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.38 - 0.46C) (SAE 4340 MODIFIED), ANNEALED |
| SAE AMS 5584 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS AND WELDED HYDRAULIC TUBING, 17CR - 12NI - 1.5MO - 0.03C MAX, COLD DRAWN, 1/8 HARD TEMPER |
| SAE MAM4141B | Aluminum Alloy, Die Forgings, 5.6zn 2.5mg 1.6cu 0.23cr Solution and Precipitation Heat Treated |
| SAE AMS 5361G : 2013(S 2019) | STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 13.5NI - 2.1MO, SOLUTION HEAT TREATED |
| SAE AMS5363F | STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 10.5NI - 0.90 (CB+TA), SOLUTION HEAT TREATED |
| SAE AMS 4440 : 1999 | MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED |
| SAE AMS5375F | ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 65.5CO - 25CR - 1.8NI - 5.0W AS CAST |
| SAE AMS7898D | Tungsten Sheet, Strip, Plate, and Foil, Pressed, Sintered, and Wrought |
| MS9558 Revision E:1993 | BOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A |
| MIL R 25532 : A | ROCKET MOTOR, AERONAUTICAL, QUALIFICATION TEST FOR |
| SAE AMS5389D | ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 55NI - 16.5CR - 17MO - 4.5W - 5.8FE - 0.40V, SOLUTION HEAT TREATED |
| SAE AMS4444E | MAGNESIUM ALLOY CASTINGS, SAND, 6.0ZN - 0.80ZR (ZK61A-T5), PRECIPITATION HEAT TREATED |
| SAE AMS4275E | CASTINGS, PERMANENT MOLD, 6.2SN - 1CU - 1NI, STRESS RELIEVED |
| SAE AMS4425D | MAGNESIUM ALLOY CASTINGS, SAND, 5.8ZN - 2.5RE - 0.70ZR (ZE63-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS5395D | ALLOY IRON CASTINGS, DUCTILE, SAND, CORROSION RESISTANT, 22NI (2.5 - 3.0C), AS CAST |
| MA1784A : 2018 | Spacers and Washers, Procurement Specification for, Metric |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.