SAE AMS2635D
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Radiographic Inspection
Hardcopy , PDF
23-07-2013
English
01-05-1999
Describes procedures for radiographic inspection mainly for determination of the presence of cracks, porosity, blowholes, inclusions and other imperfections which may or may not be exposed to the surface and may be detrimental to use of parts.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| Supersedes |
This specification covers the procedures for radiographic inspection.
| Standards | Relationship |
| MIL-STD-453 Revision C:1984 | Similar to |
| SAE AMS4226B | Aluminum Alloy Castings, High Strength 5.0Cu - 0.35Mn - 0.18Zr - 0.10V (224.0) Solution and Precipitation Heat Treated (Overaged) |
| SAE AMS4240G | Castings, Sand, 10Mg, Solution Heat Treated and Naturally Aged |
| SAE AMS4222H | Aluminum Alloy Castings, Sand, Moderate Heat Resistance 4.0Cu - 2.0Ni - 1.5Mg - 0.12Ti (242.0P) Solution Heat Treated and Stabilized |
| SAE AMS5384F | Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated |
| SAE AMS4997B | Titanium Alloy, Powder 5Al 2Sn 2Zr 4Cr 4Mo 0.10O₂, Premium Quality |
| SAE AMS4420P | Magnesium Alloy Castings, Sand 6Al - 3Zn (AZ63A-F) As Cast |
| SAE AMS 2680 : 2010 | ELECTRON-BEAM WELDING, FOR FATIGUE CRITICAL APPLICATIONS |
| SAE AMS5358D | Steel Castings, Investment, Corrosion Resistant 18Cr - 9Ni Solution Heat Treated |
| SAE AMS5412A | Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion-Resistant 13Cr - 8.0Ni - 2.2Mo - 1.1Al (195 ksi (1344 MPa) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat Treated |
| FAA AC 33-6 : 2017 | WELD REPAIR OF ALUMINUM CRANKCASES AND CYLINDERS OF PISTON ENGINES |
| MIL-Q-22631 Revision B:1964 | QUALITY CONTROL OF METAL WROUGHT PRODUCTS EXCEPT FORGINGS PROCURED TO NON-GOVERNMENTAL SPECIFICATIONS |
| SAE AMS5375F | Alloy Castings, Investment, Corrosion and Heat Resistant 65.5Co - 25Cr - 1.8Ni - 5.0W As Cast |
| SAE AMS5363F | Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5Cr - 10.5Ni - 0.90 (Cb+Ta) Solution Heat Treated |
| SAE AMS 4440 : 1999 | MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED |
| SAE AMS5330E | Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340 Modified) Annealed |
| SAE AMS5409A | Castings, Alloy-Investment, 61ni 16cr 8.5co 1.8mo 2.6w 0.8cb 3.4ti 1.8ta 3.4al 0.010b 0.06zr (0.03-0.08c), Vacuum Melted, Vacuum Cast, as Cast |
| SAE AMS2670J | Brazing, Copper |
| SAE AMS4231G | Castings, Sand, 4.5Cu - 1.1Si, Solution and Precipitation Heat Treated |
| SAE AMS5341D | Steel Castings, Investment, Corrosion Resistant 19.5Cr - 10.5Ni - 0.25S (Type 303) Solution Heat Treated |
| SAE AMS5395D | Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22Ni (2.5 - 3.0C) As Cast |
| SAE AMS5351G | Steel Castings, Sand, Corrosion and Moderate Heat Resistant 13Cr Normalized and Tempered |
| SAE AMS5348C | Steel Castings, Tubular, Centrifugal, Corrosion Resistant 15Cr - 4.6Ni - 0.22 (Cb+Ta) - 2.8Cu Solution Heat Treated |
| SAE AMS5328E | Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.28 - 0.36C) (SAE 4330 Modified) Annealed |
| SAE AMS 5361G : 2013(S 2019) | STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 13.5NI - 2.1MO, SOLUTION HEAT TREATED |
| SAE J427_201801 | Penetrating Radiation Inspection |
| SAE AMS5373E | Alloy Castings, Sand, Corrosion and Heat Resistant 16Co - 29Cr - 4.5W As Cast |
| SAE AMS2689B | Fusion Welding Titanium and Titanium Alloys |
| SAE MAM4427A | Magnesium Alloy Sand Castings 4.0y 2.3nd 0.7zr Solution and Precipitation Heat Treated |
| SAE AMS5389D | Alloy Castings, Sand, Corrosion and Heat Resistant 55Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V Solution Heat Treated |
| SAE AMS4444E | Magnesium Alloy Castings, Sand 6.0Zn - 0.80Zr (ZK61A-T5) Precipitation Heat Treated |
| SAE AMS4275E | Castings, Permanent Mold 6.2Sn - 1Cu - 1Ni Stress Relieved |
| SAE AMS4425D | Magnesium Alloy Castings, Sand 5.8Zn - 2.5RE - 0.70Zr (ZE63-T6) Solution and Precipitation Heat Treated |
| SAE AMS4227E | Aluminum Alloy, Castings, Sand, 8.0cu 6.0mg 0.50mn 0.50ni, as Cast |
| SAE AMS7295C | Radiographic Film and Paper, Industrial Grade |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.