SAE AMS C 81562 : 1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED)
Available format(s)
Hardcopy , PDF
Superseded date
28-01-2018
Superseded by
Language(s)
English
Published date
01-01-1998
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| MIL-C-81562 Revision B:1983 | Similar to |
| MIL-DTL-32371-8 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead |
| MIL-DTL-32460-3 Base Document:2013 | FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
| MIL-DTL-32480-1 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32372-4 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
| MS51819 Revision E:1987 | ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| MS51510 Revision D:2017 | TEE, TUBE, 37 DEGREE FLARED |
| MS51525 Revision B:1988 | FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED |
| MIL-DTL-52471-10 Revision B:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100R12 Four-Spiral-Wrap Reinforcement Hose |
| MIL-DTL-52525-35 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-32480-5 Base Document:2014 | Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MS51814 Revision E:1987 | NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC |
| MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
| MIL-DTL-32371-4 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch |
| MIL-DTL-52525-10 Revision D:2011 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| MIL-DTL-32372-12 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run |
| MS51519 Revision C:2017 | NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED |
| MIL-DTL-83796-10 Revision A:2014 | HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
| MIL-DTL-52525-7 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop |
| MIL-DTL-32464-6 Base Document:2013 | Male Adapted, Union Cross, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| MIL-DTL-32464-1 Base Document:2013 | Male Adapter, Straight, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32464-12 Base Document:2013 | Male Adapter, Tee, 37 Degrees Spherical to ANPT, ANPT on Branch, 1500-3000 PSI |
| MIL-DTL-83796-11 Revision A:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
| MS35758 Revision D:2012 | CUPS, GREASE, MANUAL FEED |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MS51825 Revision H:2008 | SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC |
| MIL-DTL-52525-32 Revision A:2008 | FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
| MS51811 Revision E:1987 | TEE, TUBE, FLARELESS TYPE HYDRAULIC |
| MS51534 Revision A:1979 | REDUCER, TUBE, 37 DEGREE FLARED |
| MIL-DTL-52525-44 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-32480-6 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead |
| MIL-DTL-32372-8 Revision A:2017 | Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-32372-9 Revision A:2017 | Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-52525-11 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| MS51501 Revision C:2016 | NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT |
| MIL-DTL-52525-1 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight, SAE-J516 Type, for Assembly with SAE-J517, Type 100R2 Hose |
| MS51521 Revision C:2017 | ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED |
| MS51528 Revision B:1988 | FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED |
| MS51816 Revision E:1987 | ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| MIL-DTL-52525-43 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-32372-7 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-32371-3 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow |
| MIL-DTL-32372-6 Revision A:2017 | Fitting, Adapter, 90 Degree Male, Hydraulic and Pneumatic, NPTF to ORFS Bulkhead |
| MIL-DTL-32371-6 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long |
| MS51509 Revision D:2017 | ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED |
| MS51524 Revision C:2017 | TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED |
| MS51502 Revision C:2016 | NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG |
| MS39212 Revision K:2018 | SLEEVES, COMPRESSION, TUBE - HOSE FITTING - SAFETY SLEEVE TYPE |
| MS51514 Revision D:2017 | TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED |
| MS51529 Revision B:1988 | FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING |
| MIL-DTL-62011-2 Base Document:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, Side-Mounted Connector, Type II |
| MS51532 Revision B:1988 | FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED |
| MIL-DTL-32372-2 Revision A:2017 | Fitting, Adapter, 45 DegreesElbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MIL-DTL-32480-7 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MS51520 Revision C:2017 | NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED |
| MIL-DTL-83796-4 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE |
| MIL-DTL-52471-1 Revision C:2008 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE |
| MIL-DTL-52525-6 Revision C:2008 | Fittings,Hose, Screw-on to 37 Degree Flare Female Swivel, 45Degree BentTube |
| MIL-DTL-83798-4 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight |
| MS51507 Revision D:2017 | ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED |
| MS51508 Revision D:2017 | ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED |
| MS51516 Revision C:2017 | TEE, BULKHEAD ON RUN 37 DEGREE FLARED |
| MIL-DTL-52525-36 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| MIL-DTL-32371-9 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run |
| MIL-DTL-52525-15 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| SAE AS 12500 : 2018 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-DTL-45952 Revision A:2014 | PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR |
| MIL-DTL-13791-22 Revision A:2016 | MACHINE-PAN HEAD SCREW, CROSS-RECESSED, CARBON STEEL, PROPER PROTECTED COATING PLATED, UNC-2A |
| MIL-DTL-12133 Revision E:2015 | WASHER, SPRING TENSION, GENERAL SPECIFICATION FOR |
| MIL-DTL-32460-8 Base Document:2013 | FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
| MS35759 Revision C:2008 | CUPS, GREASE, AUTOMATIC FEED |
| MIL-DTL-32464-7 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32464-2 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32464-4 Base Document:2013 | Male Adapter, Tee, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MIL-DTL-83798-5 Revision E:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees |
| MIL-DTL-32464-8 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-52525-13 Revision C:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT |
| MIL-DTL-32464 Revision A:2017 | FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
| MIL-DTL-32464-10 Base Document:2013 | Male Adapter, Long, Nipple Tube, Hydraulic and Pneumatic Tube, Long Hex, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MS20760 Revision D:2013 | ADAPTER, STRAIGHT, FLANGE TO TUBE |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| MIL-DTL-32460-7 Base Document:2013 | FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
| MS27611 Revision H:2018 | VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE |
| MIL-DTL-32460-5 Base Document:2013 | FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
| MIL-DTL-32464-5 Base Document:2013 | Male, Adapter, Nipple Tube, Hydraulic and Pneumatic, Regular Hex, 37 Degrees Spherical to NPTF, 1500-3000 PSI |
| MIL-DTL-52525-5 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-52525-34 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-52525-2 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| MIL-DTL-32460-1 Base Document:2013 | FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
| MS20762 Revision D:2016 | ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES |
| MS39324 Revision C:2017 | ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE |
| MIL-DTL-70337 Revision A:2015 | RING, RETAINING, ROUND SECTION |
| MS51842 Revision E:2017 | ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC |
| MIL-DTL-62011-1 Base Document:2009 | PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, TOP-MOUNTED CONNECTOR, TYPE 1 |
| MIL-DTL-32460-6 Base Document:2013 | FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-83796-1 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
| MIL-DTL-52525-38 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
| MIL-DTL-83796-13 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole |
| MS51512 Revision D:2017 | TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED |
| MIL-DTL-52525-3 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Short Drop |
| MS51531 Revision B:1985 | NUT, TUBE COUPLING, 37 DEGREE FLARED |
| MS39322 Revision B:2017 | ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH |
| MIL-DTL-32464-11 Base Document:2013 | Male Adapter, Bulkhead, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MS51533 Revision A:1979 | SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED |
| MS51526 Revision A:1979 | ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG) |
| MS51530 Revision B:1988 | FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED |
| MS20756 Revision F:2011 | FLANGE, SWIVEL, RETAINING |
| MIL-DTL-32372-11 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Male to ORFS Female Swivel to NPTF Male on Branch |
| MIL-DTL-52525-9 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
| MIL-DTL-83796-3 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
| MS20761 Revision C:2016 | ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES |
| MIL-DTL-13791 Revision H:2015 | DISTRIBUTOR, IGNITION SYSTEM: INTEGRAL COIL, WATERPROOF 24 VOLT |
| MIL-DTL-52525-17 Revision C:2008 | FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL-DTL-52525-40 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-52525-31 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL |
| MIL-DTL-32480-2 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32480-8 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32460-4 Base Document:2013 | FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
| MS51522 Revision C:2017 | ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED |
| MIL-DTL-32372-5 Revision A:2017 | Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
| MIL-DTL-32464-3 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32372-10 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Female Run to Run to NPTF Male on Branch |
| SAE J 846 : 2015 | CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS |
| MIL-STD-171 Revision F:2011 | FINISHING OF METAL AND WOOD SURFACES |
| MIL-DTL-32480-3 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-52471-8 Revision B:2008 | Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100RE |
| MIL-DTL-32460-9 Base Document:2013 | FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
| MIL-DTL-32464-9 Base Document:2013 | Male Adapter, Tee, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Run, 1500-3000 PSI |
| MS51818 Revision E:1987 | TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC |
| MIL-DTL-32371-1 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight |
| MIL-DTL-52525-16 Revision D:2008 | FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC) |
| MIL-DTL-52471-2 Revision C:2008 | HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100R2, DOUBLE-WIRE BRAIDED REINFORCEMENT HOSE |
| MIL-DTL-52525-37 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
| MIL-DTL-52471-3 Revision C:2008 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE |
| MS51841 Revision E:2017 | TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC |
| MS51517 Revision C:2017 | CROSS, TUBE, 37 DEGREE FLARED |
| MIL-DTL-32372-1 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MIL-DTL-32480-9 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32371-5 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch |
| MIL-DTL-32371-7 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead |
| MS51500 Revision F:2017 | FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED |
| MS51505 Revision C:2016 | ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED |
| MIL-DTL-32480-4 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MIL-DTL-52525-45 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| MS51513 Revision D:2017 | TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED |
| MIL-DTL-52525-8 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 DegreeBent Tube, Long Drop |
| MIL-DTL-32371-2 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow |
| MS51506 Revision E:2017 | FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED |
| MS51527 Revision D:2000 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared |
| MIL-DTL-52525-39 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE |
| MS39325 Revision C:2006 | HOSE ASSEMBLIES; AIR (TYPE 1) AND VACUUM (TYPE 2) BRAKE 3/8 INCH NOMINAL DIAMETER |
| MS51815 Revision F:1987 | ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| MS39323 Revision C:2017 | FITTING, TUBE, REDUCER: 37 DEGREE FLARE |
| MS51523 Revision C:2017 | TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED |
| MIL-DTL-52525-14 Revision C:2008 | FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT |
| MIL-DTL-83796-12 Base Document:2008 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
| MS51511 Revision D:2017 | TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED |
| MS51812 Revision F:1987 | NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC |
| MS51515 Revision D:2017 | TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED |
| MIL-DTL-52525-42 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT |
| MIL-DTL-52525-41 Revision A:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MS51817 Revision E:1987 | ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| MS51820 Revision E:1987 | ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC |
| MS51518 Revision C:2017 | PLUG, MACHINE THREAD, 37 DEGREE FLARED |
| MS51813 Revision E:1987 | ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| MIL-DTL-83798-2 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees |
| MIL-DTL-52525-12 Revision D:2011 | Fittings, Hose, Screw on to Split-Flange 90 Degree Bent |
| MIL-DTL-32460-2 Base Document:2013 | FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
| MIL-DTL-52525-33 Revision A:2008 | FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE |
| MS51844 Revision E:2011 | SLEEVE, SWAGING-WIRE ROPE |
| MIL-DTL-52525-4 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Long Drop |
| MS51503 Revision C:2016 | ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED |
| MIL-DTL-83798-6 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees |
| MIL-DTL-32372-3 Revision A:2017 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MS51504 Revision C:2016 | ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED |
| MIL-DTL-83796-2 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
| MIL-DTL-83798-1 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight |
| MIL-DTL-83798-3 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees |
| FF-T-276 Revision C:2013 | Thimbles, Rope |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.