SAE AMS7259E
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Rubber: Fluorocarbon (FKM) High Temperature/Fluid Resistant Low Compression Set/85 to 95 Hardness For Seals In Fuel Systems and Specific Engine Oil Systems
Hardcopy , PDF
25-09-2024
English
20-05-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Describes a fluorocarbon (FKM) rubber in the form of O-rings, O-ring cord, compression seals, and molded-in-place gaskets for aeronautical and aerospace applications.
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers a fluorocarbon (FKM) rubber in the form of O-rings, O-ring cord, compression seals, and molded-in-place gaskets for aeronautical and aerospace applications.
| SAE AIR1387D | Designing with Elastomers for use at Low Temperatures, Near or Below Glass Transition |
| SAE AS19692B | Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
| SAE AMS3218D | Elastomer: Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 |
| MIL-DTL-17060 Revision G:2009 | MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
| ASTM F 1511 : 2016-11 | SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS |
| SAE ARP5796 | Flight Critical Control Valves, Military Aircraft |
| MIL-DTL-24509 Revision B:2017 | Valves, Flanged, Balland Plugfor Sewageand Seawater Service |
| MIL-STD-1587 Revision D:2017 | MATERIAL AND PROCESS REQUIREMENTS FOR AEROSPACE WEAPONS SYSTEMS |
| MIL-DTL-24231 Revision E:2013 | Connectors, Plugs, Receptacles, Adapters, Hull Inserts, and Hull Insert Plugs, Pressure-Proof, General Specification for |
| SAE AS 83248/2 : 2016 | O-RING MOLDED FROM AMS7259 MATERIAL |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| MIL-G-18997 Revision E:1991 | GAUGE, PRESSURE, DIAL INDICATING |
| ASME B40.100 : 2013 | Pressure Gauges and Gauge Attachments (B40.100 - 2013) |
| MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
| MIL-PRF-39012-79 Revision G:2008 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED) PIN CONTACT, CLASS 2, SEMIRIGID CABLE |
| SAE AS4941B | Aerospace - General Requirements for Commercial Aircraft Hydraulic Components |
| MIL-PRF-57267 Base Document:2017 | COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5 |
| MIL-DTL-7899 Revision D:2014 | Valve, Check, Aircraft Fuel System |
| MIL-PRF-39012-80 Revision F:2008 | Connectors, Plug, Electrical, Coaxial, Radio Frequency, Series SMA (Cabled) Pin Contact, Right Angle, Class 2, Semirigid Cable |
| MIL-DTL-22606 Revision D:2011 | FLASK AND END PLUGS, COMPRESSED GAS - AIR, OXYGEN, AND NITROGEN |
| MIL-DTL-24578 Revision C:2015 | Valves, Globe, Pressure Instrument, Stem Test Connection, Union End |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| ASTM D 297 : 2015 : REDLINE | Standard Test Methods for Rubber Products—Chemical Analysis |
| SAE AMS2817G | Packaging and Identification of Molded Elastomeric Seals and Sealing Components |
| SAE AS3581 | PACKING, PREFORMED – O-RING SEAL AMS7259 |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| SAE AS568D | Aerospace Size Standard for O-rings |
| SAE AIR851C | O-Ring Tension Testing Calculations |
| SAE AS 871 : 2012 | MANUFACTURING AND INSPECTION STANDARD FOR PREFORMED PACKINGS (O-RINGS) |
| SAE AS 5752 : 2014 | AEROSPACE - VISUAL INSPECTION STANDARD FOR ELASTOMERIC SEALING ELEMENTS OTHER THAN O-RINGS |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| ASTM D 1329 : 2016 : REDLINE | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.