SAE AMS 4928 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
Available format(s)
Hardcopy , PDF
Superseded date
17-12-2017
Superseded by
Language(s)
English
Published date
01-01-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes up through 6.000 inches (152.40 mm) inclusive in diameter or least distance between parallel sides and stock of any size for forging or flash welded rings.
| Committee |
AMS G
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| 05/30128217 DC : DRAFT JAN 2005 | ISO/DIS 23933 - AEROSPACE - ARAMID REINFORCED LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 135 DEGREE C/20 684 KPA (275 DEGREE F/3 000 PSI) AND 135 DEGREE C/21 000 KPA (275 DEGREE F/3 046 PSI) - PROCUREMENT SPECIFICATION |
| SAE MA 2005 : 2015 | TUBE FITTINGS, AEROSPACE FLUID SYSTEMS, SEPARABLE, FOR 24 DEGREE CONE, GENERAL SPECIFICATION, METRIC |
| MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
| AN915 Revision 14:2015 | ELBOW, PIPE, 45 DEGREES |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| SAE AS 4388 : 2013 | HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC |
| BS ISO 7169:2014 | Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| SAE AMS 2631 : 2017 | ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE |
| MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
| AN815 Revision 10:2015 | UNION - FLARED TUBE |
| SAE MA 2060 : 2015 | FITTINGS, WELDED, HYDRAULIC, TITANIUM AND CORROSION RESISTANT STEEL, 21 000 KPA, METRIC |
| MIL-P-87988 Base Document:1989 | PIN-RIVET, THREADED WITH HEX SOCKET |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| SAE AS 4623 : 2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AMS STD 2154 : 2017-05 | INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR |
| MIL-B-23964 Revision D:1981 | BOLT, SELF-RETAINING, POSITIVE LOCKING |
| 10/30227763 DC : 0 | BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
| SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
| AN849 Revision 13:2015 | NIPPLE, HOSE |
| SAE AS 85720 : 2018 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-STD-2154 Base Document:1982 | INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| ASTM F 1472 : 2014 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| SAE AS 1975 : 2016 | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| SAE MA 2126 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), UP TO 232 DEGREES C AND 10 500 KPA PROCUREMENT SPECIFICATION, METRIC |
| SAEITC TS172-4 | TS172 Performance Specification for Nut, Union, Metric, Threaded, Self- Locking A286 Dry Film Lubricated |
| SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| MS27769 Revision B:2011 | PLUG, PIPE, COUNTERSUNK HEX HEAD |
| SAE AS 1946 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
| BS ISO 23933:2006 | Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification |
| SAE AS 5960 : 2013 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
| NFL 06 380-24 : 2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 24: HOMOGENEOUS ASSEMBLIES TITANIUM ALLOYS |
| ISO 23933:2006 | Aerospace Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) Procurement specification |
| 10/30227764 DC : 0 | BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-83798 Revision D:2008 | FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-DTL-32464 Revision A:2017 | FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
| 14/30310862 DC : 0 | BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| SAE AS 5951 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS 4604 : 2003 | HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| MIL-F-5509 Revision D:1978 | FITTING, FLARED TUBE, FLUID CONNECTION |
| SAE AS 4098 : 2013 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 400 DEGREE F, 5000 PSI HYDRAULIC AND PNEUMATIC |
| SAE MA 1975 : 2015 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS |
| SAE AMS 2488 : 2011 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| SAE J 24714 : 2001 | Fluid Systems—Connector Tubes—General Specification and Part Standard |
| SAE AS 85421 : 2015 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR |
| SAE AIR 5005 : 2015 | AEROSPACE - COMMERCIAL AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS 5958 : 2017 | FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
| I.S. EN 4632-006:2013 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 006: HOMOGENEOUS ASSEMBLIES OF TITANIUM ALLOYS |
| SAE MA 614 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC |
| NASA HDBK 6025 : 2014 | GUIDELINES FOR THE SPECIFICATION AND CERTIFICATION OF TITANIUM ALLOYS FOR NASA FLIGHT APPLICATIONS |
| SAE MA 4098 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 204 DEGREE C, 35000 KPA, HYDRAULIC AND PNEUMATIC, METRIC |
| MIL-DTL-52525 Revision F:2008 | FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
| MIL-F-18280 Revision F:1995 | FITTING, FLARELESS TUBE, FLUID CONNECTION |
| SAE AS 1576 : 2016 | FITTINGS, WELDED, HYDRAULIC, TITANIUM, CORROSION RESISTANT STEEL AND NICKEL, 3000 PSI HYDRAULIC |
| MIL-STD-1884 Revision A:1991 | COATING, PLASMA SPRAY DEPOSITION |
| MIL-DTL-83798-9 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 90 Degrees |
| 09/30199811 DC : 0 | BS EN 4632-006 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 6: HOMOGENEOUS ASSEMBLIES TITANIUM ALLOYS |
| BS EN 4632-006:2013 | Aerospace series. Weldability and brazeability of materials in aerospace constructions Homogeneous assemblies of titanium alloys |
| SAE AS 269J:2012:(S2018) | IDENTIFICATION OF MATERIAL FOR AN, MS AND AS ENGINE AND PROPELLER STANDARD UTILITY PARTS AND ALSO FOR COMPANY PARTS |
| MIL-DTL-5070 Revision F:2006 | ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
| AN848 Revision 13:2015 | Elbow, Hose, 90 Degree |
| SAE AS 5000 : 2010 | FITTING, PLUG-IN UNION, RING LOCKED, 24 DEGREE CONE, FLUID CONNECTION, 5080 PSI (35000 KPA), SPECIFICATION FOR |
| SAE AS 4510 : 2013 | FITTINGS, WELD, FLUID CONNECTION, 5000 PSI |
| SAE ARP 1755 : 2000 | EFFECT OF CLEANING AGENTS ON AIRCRAFT ENGINE MATERIALS, STOCK LOSS TEST METHOD |
| ISO 8913:2006 | Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) Procurement specification |
| SAE MA 4510 : 2015 | FITTINGS, WELD, FLUID CONNECTION, 35,000 KPA, METRIC |
| SAE AS 4897 : 1994 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR |
| ASTM E 2375 : 2016 : REDLINE | Standard Practice for Ultrasonic Testing of Wrought Products |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| EN 4632-006:2013 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys |
| 16/30346081 DC : 0 | BS EN 4510 - AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREE, SPHERICAL IN TITANIUM ALLOY TIP64001 - ADAPTERS, STRAIGHT, DOUBLE END, WITH LOCKING RING |
| SAE AIR 5693 : 2014 | COMPATIBILITY OF PTFE HOSE ASSEMBLIES WITH TYPICAL FLUIDS FOUND IN AEROSPACE APPLICATIONS |
| SAE AS 4444 : 2013 | FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI |
| MIL-DTL-83798-8 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 45 Degrees |
| SAE AMS 2437 : 2012 | COATING, PLASMA SPRAY DEPOSITION |
| MIL-DTL-83798-7 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, Straight |
| PREN 4833 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| MIL B 85667/12 : 0 | BOLT, SLEEVE 100 DEGREE TENSION FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, TITANIUM ALLOY PIN, 95 KSI FSU, 160 KSI FTU |
| PREN 4836 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| PREN 4510 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001, PORT ADAPTER, STRAIGHT, DOUBLE END, WITH LOCKING RING |
| PREN 4403 : 200P2 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN TITANIUM ALLOY TI 44,5 CB, WITH ALUMINIUM PIGMENTED COATING, METRIC SERIES |
| PREN 4632-006 : DRAFT 2008 | WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 006: HOMOGENEOUS ASSEMBLIES TITANIUM ALLOYS |
| SAE AMS 2487 : 2018 | ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS SOLUTION PH 12.4 MAXIMUM |
| TR 4661 : 2009 | AEROSPACE SERIES - HINGES, FLIGHT CONTROLS MATERIALS AND SURFACE TREATMENTS |
| UNI EN 4632-006 : 2014 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 006: HOMOGENEOUS ASSEMBLIES OF TITANIUM ALLOYS |
| SAE AMS 4999 : 2016 | TITANIUM ALLOY DIRECT DEPOSITED PRODUCTS, 6AL - 4V, ANNEALED |
| SAE AS 614 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| SAE MA 4623 : 2015 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.