SAE AMS 2629 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FLUID, JET REFERENCE
Available format(s)
Hardcopy , PDF
Superseded date
18-03-2020
Superseded by
Language(s)
English
Published date
01-01-2017
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Describes a mixture of liquid hydrocarbons and soluble additives.
| Committee |
AMS G9
|
| DocumentType |
Revision
|
| Pages |
7
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
| SAE AMS 3166 : 2014 | SOLVENTS, CLEANING, CLEANING PRIOR TO APPLICATION OF SEALING COMPOUNDS |
| SAE AMS 3331 : 2017 | ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 65 - 75 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
| MIL-PRF-32405 Base Document:2013 | CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
| MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE |
| SAE AMS 3281 : 2016 | SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER FOR INTEGRAL FUEL TANK AND FUEL CELL CAVITIES LOW DENSITY FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| MIL-DTL-32554 Base Document:2016 | STRAPS, TIE-DOWN, ADJUSTABLE, NON-METALLIC, CABLE BUNDLING, GENERAL SPECIFICATION FOR |
| SAE AMS 3144 : 2012 | PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
| SAE AMS 3255 : 2017 | SEALING TAPE, SHEET, OR GASKET, POLYTETRAFLUOROETHYLENE, EXPANDED (EPTFE) OIL AND WATER RESISTANT |
| SAE AMS 3379 : 2013(R2018) | SEALING COMPOUND, POLYSULFIDE RUBBER PREFORMED STRIPS FOR SEALING REMOVABLE DOORS, SKINS, AND PANELS |
| MIL-S-83318 Revision A:1991 | SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
| MIL-S-8802 Revision F:1990 | SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH ADHESION |
| SAE AMS 3263 : 1997 | SEALING COMPOUND, POLYTHIOETHER, AMBIENT CURE OR IMMEDIATE HEAT CURE FOR AIRCRAFT STRUCTURES, FUEL RESISTANT WITH INTERMITTENT USE TO 400 MDCF (204 MDCC) |
| SAE AS 5127 : 2013 | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS METHODS FOR PREPARING AEROSPACE SEALANT TEST SPECIMENS |
| SAE AMS 3276 : 2016 | SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE AMS 3102 : 2017 | SEALING COMPOUND, POLYTHIOETHER RUBBER FAST CURING, LIGHT WEIGHT (SPECIFIC GRAVITY 0.78, MAX.) FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE AMS S 83318 : 2016 | SEALING COMPOUND, POLYSULFIDE TYPE, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
| SAE ARP 81490 : 2016 | TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
| SAE AMS 3603 : 2002 | PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
| SAE AMS 3325 : 2014 | FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 55 - 65 DUROMETER TYPE 'A' HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATION OILS |
| SAE AMS 3167 : 2005 | SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
| SAE AMS 3100 : 2013 | ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS |
| SAE AMS 3265 : 2015 | SEALING COMPOUND, POLYSULFIDE (T) RUBBER, FUEL RESISTANT, NON-CHROMATED CORROSION INHIBITING, FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE AMS 3259 : 1997 | SEALING COMPOUND, POLYTHIOETHER - NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 DEGREE F (182 DEGREE C) |
| SAE AMS 3377 : 2015 | SEALING COMPOUND, ELECTRICALLY CONDUCTIVE CORROSION INHIBITING |
| SAE AMS 3376 : 2015 | SEALING COMPOUND, NON-CURING, FLUOROSILICONE GROOVE INJECTION TEMPERATURE AND FUEL RESISTANT |
| SAE AMS 3266 : 2017 | SEALING COMPOUND, POLYTHIOETHER ELASTOMERIC TWO-PART ELECTRICALLY CONDUCTIVE |
| MIL-PRF-87260 Revision B:2006 | Foam Material, Explosion Suppression, Inherently Electrostatically Conductive, for Aircraft Fuel Tanks |
| MIL-DTL-25988 Revision C:2006 | RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES |
| SAE AMS 3329 : 2017 | ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45-55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
| SAE AMS 3381 : 2014 | SEALING COMPOUND, AIRCRAFT FIREWALL, NON-SILICONE |
| SAE AS 5127/1 : 2014 | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS |
| SAE AMS C 27725 : 2016 | COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C) |
| MIL-PRF-81733 Revision D:1998 | SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
| SAE AMS 3143 : 2016 | POWDER COATING MATERIAL |
| SAE AMS 3330C : 2017 | ELASTOMER: FLUOROSILICONE (FVMQ) RUBBER FUEL AND OIL RESISTANT 45-55 FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| SAE AMS S 8802 : 2015 | SEALING COMPOUND, FUEL RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
| SAE AMS 3277 : 2015 | SEALING COMPOUND, POLYTHIOETHER RUBBER, FAST CURING FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE AMS 3284 : 2017 | SEALING COMPOUND, LOW ADHESION, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
| ASTM D 3227 : 2016 : REDLINE | Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) |
| ASTM D 156 : 2015 : REDLINE | Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
| MIL-PRF-25017 Revision H:2011 | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
| ASTM D 6379 : 2011 : REDLINE | TEST METHOD FOR DETERMINATION OF AROMATIC HYDROCARBON TYPES IN AVIATION FUELS AND PETROLEUM DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| SAE AS 5502 : 2016 | STANDARD REQUIREMENTS FOR AEROSPACE SEALANTS AND ADHESION PROMOTERS |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.