SAE AMS 2371 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK
Available format(s)
Hardcopy , PDF
Superseded date
20-12-2019
Superseded by
Language(s)
English
Published date
01-01-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGEMENT
7 REJECTIONS
8 NOTES
Specifies quality assurance sampling and testing procedures used to determine conformance to applicable material specification requirements of wrought corrosion and heat-resistant steel and alloy products and of forging stock.
| Committee |
AMS-F
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| MIL-Q-22631 Revision B:1964 | Similar to |
| SAE AMS 5524 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE 18CR - 13NI - 2.5MO (SAE 30316) SOLUTION HEAT TREATED |
| SAE AMS 5697 : 2018 | STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5895 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
| SAE AMS 5900 : 2000 | STEEL BARS, FORGINGS, AND TUBING, CORROSION RESISTANT, 14CR - 2.1MO - 0.30CB - 1.0V (1.05 - 1.15C), PREMIUM AIRCRAFT QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 5960 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT SHEET, STRIP, AND FOIL, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED |
| SAE AMS 5866 : 2016 | STEEL, CORROSION-RESISTANT, FLAT WIRE, 18CR - 9.0NI (302), SPRING TEMPER |
| SAE AMS 5843 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED |
| SAE AMS 5546 : 1990(S2017) | STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5CR - 4.5NI - 2.9MO - 0.10N COLD ROLLED, TEMPERED |
| SAE AMS 5711 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 65NI - 15.8CR - 15.2MO - 0.30AL - 0.05LA, SOLUTION HEAT TREATED |
| SAE MAM 5598 : 2000 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 72NI - 15.5CR - 0.95(CB + TA) - 2.5TI - 0.70AL - 7.0FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5553 : 2018 | NICKEL, SHEET AND STRIP, LOW (0.02 MAX) CARBON, ANNEALED |
| SAE AMS 5889 : 2015 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET AND STRIP, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE MAM 5914 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED |
| SAE AMS 5935 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 10NI - 2MO - 0.9AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5575 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5573 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 17CR - 12NI - 2.5MO (SAE 30316), SOLUTION HEAT TREATED |
| SAE AMS 5587 : 2016 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5902 : 2008 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 8NI (SAE 30301), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS 5663 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5625 : 2018 | STEEL BARS, HIGH EXPANSION, 9.5NI - 5.5MN (0.55 - 0.65C), COLD FINISHED |
| SAE AMS 5223 : 2012 | IRON-NICKEL ALLOY, STRIP, 49Fe 5.3Cr 42Ni 2.5Ti 0.55Al, SOLUTION HEAT TREATED, COLD ROLLED, 10% REDUCTION |
| SAE AMS 5704 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, FORGINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| MIL-DTL-16356 Revision E:2013 | GAUGES, DIRECT READING, OBLONG GLASS |
| SAE AMS 5709 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREE F (1079 DEGREE C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4544 H: 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 67NI - 30CU, ANNEALED |
| SAE AMS 7724 : 1987 (S2017) | ALLOY SHEET AND STRIP, SINTERED WIRE MESH, CORROSION AND HEAT RESISTANT, 30FE - 1.5MN - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB + TA) - 0.15N, POROUS |
| SAE AMS 5622 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5826 : 2017 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 15CR - 5.1NI - 0.30CB(NB) - 3.2CU |
| SAE AMS5624F:1989(S2017) | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished(STABILIZED Apr 2017) |
| SAE AS 1371 : 2015 | NUTS, SELF-LOCKING, CORROSION RESISTANT STEEL, HIGH STRENGTH, PREVAILING TORQUE, ALL METAL, 800 DEGREES F (427 DEGREES C) USE, UNJ THREAD FORM |
| SAE AMS 5649 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 13NI - 2.1MO, FREE MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5655 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12.5CR - 0.75NI - 1.0MO - 1.0W - 0.24V (0.20-0.25C) HARDENED AND TEMPERED |
| SAE AMS 5703 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5503 : 2015 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 17CR (SAE 51430) ANNEALED |
| SAE AMS 5764 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS 5.0MN - 22CR - 12.5NI - 2.2MO - 0.20CB - 0.30N - 0.20V SOLUTION HEAT TREATED |
| SAE AMS 5674 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 11.5NI - 0.70 CB (SAE 30347) SOLUTION HEAT TREATED |
| SAE AMS 5834 : 2014 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, COLD DRAWN, AND AGED |
| SAE AMS 5961 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 74NI - 15.5CR - 8.0FE, COLD REDUCED, SPRING TEMPER |
| SAE AMS5530H:1988(S2017) | ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT, 58NI - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5646 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5842 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED |
| SAE AMS 5665 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE |
| SAE AMS 5507 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 13NI - 2.5MO (316L), SOLUTION HEAT TREATED |
| SAE AMS 5903 : 2006 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 1/4 HARD, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5618 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 5638 : 2015 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED |
| SAE AMS 5571J:2012(R2018) | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5862M:2017 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5550F :1988(S2017) | ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT, 80NI - 15.5CR - 0.62TI - 3.25AL, ANNEALED |
| SAE AMS 5734 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5916 : 2017 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 35FE - 24CR - 37NI - 0.65CB(NB) - 0.2N, ANNEALED |
| SAE AMS 5557 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |
| SAE AMS 5888C : 2009(R2015) | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, PLATE, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, ANNEALED |
| SAE AMS 5631 : 2018 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 17CR (0.60 - 0.75C) (440A) |
| SAE AMS 5715 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60.5NI - 23CR - 14FE - 1.4AL, ANNEALED |
| SAE AMS 5628 : 2015 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 16CR - 2.5NI (SAE 51431) |
| SAE AMS 5589 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C), SOLUTION HEAT TREATED |
| SAE AMS 5878 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 59NI - 22CR - 2MO - 14W - 0.35AI - 0.03LA, SOLUTION HEAT TREATED |
| SAE AMS5910B | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.2NI (SAE 30304) COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5872 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 48NI - 20CR - 20CO - 5.9MO - 2.2TI - 0.45AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED |
| SAE AMS 5719 : 2012 | STEEL BARS, WIRE, FORGINGS, TUBING, RINGS, AND EXTRUSIONS, CORROSION-RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED, VACUUM ARC OR ELECTROSLAG REMELTED |
| SAE AMS 5643 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5577 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED |
| DOT/FAA/AR-MMPDS-01 : 20030131 | METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS) |
| SAE AMS 5899 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
| SAE AMS 5614 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12CR - 0.50MO, ANNEALED |
| SAE AMS 5667 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE EQUALIZED, PRECIPITATION HARDENABLE |
| SAE AMS 5221 E: 2012 | IRON-NICKEL ALLOY STRIP 49FE - 5.3CR - 42NI - 2.5TI - 0.55AL SOLUTION HEAT TREATED |
| SAE AMS 5578 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 12CR - 8.5NI - 0.30CB - 1.1TI - 2.0CU, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5914 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED |
| SAE AMS7717E:2015(R2019) | NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP, 50NI - 50FE, ANNEALED, FORMING GRADE |
| SAE AMS 5576 : 2010 | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING - 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS 5780 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 15.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS 5874 : 2012 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05ZR - 0.05LA - 0.20N SOLUTION HEAT TREATED |
| SAE AMS 5621 : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30-0.40C) (51420), ANNEALED |
| SAE AMS 5636 : 2006 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |
| SAE MAM 5599 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 62NI - 21.5CR - 9.0MO - 3.7 (CB+TA) ANNEALED |
| SAE AMS 5782 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 20.5CR - 9.0NI - 0.50MO - 1.5W - 1.2CB - 0.20TI, VACUUM INDUCTION MELTED |
| SAE AMS 5879 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND FOIL, 62NI - 21.5CR - 9.0MO - 3.7CB (NB), COLD ROLLED AND ANNEALED |
| SAE AMS 5907 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 12NI - 2.5MO (SAE 30316), COLD ROLLED, 1/4 HARD, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5442 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5824F : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE 17CR - 7.1NI - 1.0AL |
| SAE AMS 5642 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 10.5NI - 0.60CB, FREE-MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5966 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 50NI - 20CR - 20CO - 5.9MO - 2.2TI - 0.45AI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 5515 : 2013 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 8.5NI (302), SOLUTION HEAT TREATED, HIGH DUCTILITY |
| SAE AMS5640V:2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING |
| SAE AMS 5688 : 2012 | STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER |
| SAE AMS 5743 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED |
| SAE AMS 5821 : 2011 | STEEL, CORROSION-RESISTANT, WELDING WIRE 12CR (SAE 51410 MODIFIED) FERRITE CONTROL GRADE |
| SAE AMS 5648 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS 5873 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 65NI - 15.8CR - 15.2MO - 0.30AI - 0.05LA, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED |
| SAE AMS 5629H : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5951 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE |
| SAE AMS 5796 : 2012 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 52CO - 20CR - 10NI - 15W |
| SAE AMS 5630 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C) |
| SAE AMS 6533 : 2015 | STEEL, WELDING WIRE 2.0CR - 10NI - 14CO - 1.0MO - (0.13 - 0.17C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5680 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 18.5CR - 11NI - 0.40CB (NB) (SAE 30347) |
| SAE AMS 5611 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, CONSUMABLE ELECTRODE MELTED |
| SAE AMS 5853 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED AND WORK-STRENGTHENED, 160 KSI (1103 MPA) TENSILE STRENGTH |
| SAE AMS 5875 : 2012 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, STRIP, 20CR - 15NI - 40CO - 7.0MO - 16FE, SOLUTION HEAT TREATED, COLD ROLLED, AND AGED, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5604 J: 2018 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 16.5CR - 4.0NI - 4.0CU - 0.30CB, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5750 : 2017 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, NICKEL BASE - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5846 : 2016 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 53NI - 15CR - 18.5CO - 5.0MO - 3.2TI - 4.2AL - 0.03B, DOUBLE VACUUM MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5656F : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED |
| SAE AMS 5532 : 2017 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 30FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB(NB) - 0.15N, SOLUTION HEAT TREATED |
| SAE AMS4675E : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 67NI - 30CU |
| SAE AMS 5841 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
| SAE AMS5802E : 2017 | IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 41FE - 37.5NI - 14CO - 4.8CB (NB) - 1.5TI, VACUUM MELTED, LOW EXPANSION |
| SAE AMS 7727F : 2017(S2019) | IRON-NICKEL-COBALT ALLOY, BARS AND FORGINGS, 53FE - 29NI - 17CO, LOW EXPANSION, GLASS SEALING |
| SAE AMS 5672 : 1981(S2017) | STEEL WIRE, CORROSION RESISTANT, 11.8CR - 8.5NI - 0.30(CB + TA) - 1.1TI - 2.0CU, PRECIPITATION HARDENABLE, SPRING TEMPER |
| SAE AMS5926 | STEEL, CORROSION-RESISTANT, BARS, WIRE, TUBING, AND FORGINGS 15.5CR - 1.5SI - 0.3MO - 0.1N (0.45 - 0.60C) FOR BEARING APPLICATIONS |
| SAE AMS 5564 : 2013 | STEEL, CORROSION RESISTANT, TUBING 19CR - 10NI (SAE 30304) HIGH-PRESSURE HYDRAULIC, WELDED PLUS ULTRASONICALLY TESTED OR SEAMLESS COLD DRAWN, ONE EIGHTH - HARD TEMPER |
| SAE AMS 5701 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5857 : 2013 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 19CR - 10NI (304), HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 5913 : 2014 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304), COLD ROLLED, FULL HARD, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS 5510S : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS 5870 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 60.5NI - 23CR - 14FE - 0.35TI - 1.4AL, SOLUTION HEAT TREATED |
| SAE AMS 5745 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 16.5CR - 4.5NI - 2.9MO - 0.10N EQUALIZED AND OVER-TEMPERED |
| SAE AMS 5536 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS4575F:2017 | NICKEL-COPPER ALLOY TUBING, BRAZED, CORROSION RESISTANT, 67NI - 31CU, ANNEALED |
| SAE AMS 5706 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1825 TO 1900 DEGREES F SOLUTION HEAT TREATED |
| SAE MAM 5536 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 47.5NI - 22CR - 1.5CO 9.0MO - 0.60W - 18.5FE SOLUTION HEAT TREATED |
| SAE AMS 5716 : 2016 | IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED |
| SAE AMS 5828 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 57NI - 19.5CR - 13.5CO - 4.2MO - 3.1TI - 1.4AL - 0.006B, VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED |
| SAE AMS 5755 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 64NI - 5.0CR - 24.5MO - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5931 : 2012 | STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED |
| SAE MAM 5822 : 2000 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V VACUUM INDUCTION MELTED |
| SAE AMS 5804 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.3MO - 2.2TI - 0.006B - 0.30V |
| SAE AMS 5620 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30 - 0.40C) (SAE 51420F, 51420FSE), FREE-MACHINING GRADE |
| SAE AMS 5808 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 13NI - 2.5MO, HIGH FERRITE GRADE, TRACE ELEMENT CONTROLLED |
| SAE AMS 5911 : 2014 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304) COLD ROLLED, 1/2 HARD, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 5508 : 2014 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR - 2.0NI - 3.0W, ANNEALED |
| SAE AMS 5864 : 2013 | STEEL, CORROSION-RESISTANT, PLATE 13CR - 8.0NI - 2.2MO - 1.1AL VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5500 : 2002 | STEEL, CORROSION-RESISTANT, LAMINATED, SHEET SURFACE BONDED |
| SAE AMS 5519 : 2014 | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 18CR - 8NI (SAE 30301) COLD ROLLED, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS 5747 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5860 : 2012 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 12CR - 8.5NI - 0.30CB - 1.1TI - 2.0CU, MULTIPLE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5225 : 2014 | IRON-NICKEL ALLOY, STRIP, 49FE - 5.3CR - 42NI - 2.5TI - 0.55AL, SOLUTION HEAT TREATED, COLD ROLLED, 50% REDUCTION |
| SAE AMS 5568H : 2017 | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5930 : 2017 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS 13.0CR - 2.5NI - 5.5CO - 2.0MO - 0.60V (0.05 - 0.09C) VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED |
| SAE AMS 5735 : 1974 | STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT, 15CR - 26NI - 1. 3MO - 2.1TI - 0.30V, 1800 DEGREES F (982.2 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5726 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED AND WORK-STRENGTHENED, CONSUMABLE ELECTRODE REMELTED, 200 KSI (1379 MPA) TENSILE STRENGTH CAPABILITY |
| SAE AMS 5937 : 2012 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 11NI - 2MO - 1.5AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5766E:2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 21CR - 32.5NI - 0.38TI - 0.38AL - 45FE, SOLUTION HEAT TREATED |
| SAE AMS 5529 : 2012 | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED AND COLD ROLLED, PRECIPITATION HARDENABLE, 0.0015 TO 0.100 INCH (0.038 TO 2.54 MM) NOMINAL THICKNESS |
| SAE AS 7246 : 2012 | INSERTS, SCREW THREADS, HELICAL COIL 72NI-15.5CR-0.95(CB+TA)-2.5TI-0.70AL-7.0FE CORROSION AND HEAT RESISTANT ALLOY PROCUREMENT SPECIFICATION FOR |
| SAE AMS 5938 : 2011 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 10CR - 12NI - 2MO - 1.45AL - 1.15TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5891 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60NI - 22CR - 2.0MO - 14W - 0.35AL - 0.03LA, ANNEALED |
| SAE AMS 5892 : 2014 | ALLOY, SHEET AND STRIP, 42FE - 37.5NI - 14CO - 4.8CB (NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION |
| SAE AMS 5561 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC |
| SAE AMS 5653 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED |
| SAE AMS 5570 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE AMS 5845 : 2014 | ALLOY, CORROSION-RESISTANT, ROUND BARS 20CR - 35NI - 35CO - 10MO VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED |
| SAE AMS 5514 : 2012 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 18CR - 11.5NI (SAE 30305) SOLUTION HEAT TREATED |
| SAE AMS 5567 : 2015 | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5623 D :1990(S2017) | STEEL BARS AND FORGINGS, HIGH EXPANSION, 9.5NO - 5.5MN (0.55 - 0.65C) ANNEALED |
| SAE AMS 5823 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V |
| SAE AMS 6501 : 2017 | STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5934 : 2016 | STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5713K : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5886 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 50NI - 20CR - 20CO - 5.8MO - 2.2TI - 0.45AL CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 2100 DEGREES F (1149 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5772 E: 2016 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED |
| SAE AMS 5854 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED |
| SAE AMS 5800 : 2006 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 54NI - 19CR - 11CO - 10MO - 3.2TI - 1.5AL - 0.006B, VACUUM INDUCTION MELTED |
| SAE AMS 5650 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED |
| SAE AMS5751F : 1982(S2017) | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
| SAE AMS 5803 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB (NB) - 3.6CU CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 7490 : 2014 | RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS |
| SAE AMS 6466 : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE, 5.2CR - 0.55MO |
| SAE AMS 5511 : 2013 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.5NI (304L), SOLUTION HEAT TREATED |
| SAE AMS 5763E : 2016 | STEEL, CORROSION RESISTANT BARS, FORGINGS, TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.50CB (NB) - 1.5CU, SOLUTION HEAT TREATED |
| SAE AMS 5516 : 2012 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED |
| SAE AMS 5962 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS AND WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION TREATED AND WORK STRENGTHENED, PRECIPITATION HARDENABLE |
| SAE AMS 5586 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 57NI - 19.5CR - 13.5CO - 4.2MO - 2.9TI - 1.4AL - 0.006B - 0.08ZR, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE AMS 5641 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18.5CR - 10NI - 0.22SE (303SE), FREE-MACHINING; SWAGING OR UPSETTING SOLUTION HEAT TREATED |
| SAE AMS 5637 : 2012 | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5632 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.50MO (0.95 - 1.20C) (440F), FREE-MACHINING, ANNEALED |
| SAE AMS 5635 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9NI - 0.21PB (303PB), FREE-MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5583 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE TO 170 KSI (1172 MPA) TENSILE STRENGTH |
| SAE AMS 5555 : 2013 | NICKEL WIRE AND RIBBON 99NI |
| SAE AMS 5528 : 2012 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5844 : 2014 | ALLOY, CORROSION-RESISTANT, ROUND BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED AND WORK STRENGTHENED |
| SAE AMS 5549H:1987(S2017) | STEEL, CORROSION AND HEAT RESISTANT, PLATE 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED |
| SAE AMS 5678 : 2013 | STEEL, CORROSION RESISTANT, WIRE, 17CR - 7.1NI - 1.1AL, COLD DRAWN, PRECIPITATION-HARDENABLE |
| SAE AMS 5518 : 2014 | STEEL, CORROSION RESISTANT, SHEET AND STRIP 18CR - 8NI COLD ROLLED, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 5890 : 2015 | NICKEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND EXTRUSIONS, THORIA DISPERSION STRENGTHENED, 2.2THO[2], STRESS-RELIEVED |
| SAE AMS 5541 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET AND STRIP 73NI - 15.5CR - 2.4TI - 0.7AL - 7.0FE ANNEALED |
| SAE AMS 7719 : 2015 | NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP, 50NI - 50FE, STAMPING QUALITY, HALF-HARD TEMPER |
| SAE AMS 5501 : 2002 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND FOIL, 19CR - 9.5NI (304), COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5574 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING, 23CR - 13.5NI (SAE 30309S) SOLUTION HEAT TREATED |
| SAE AMS 5565L : 2013 | STEEL, CORROSION RESISTANT, WELDED TUBING, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5572 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 25CR - 20NI (SAE 30310S), SOLUTION HEAT TREATED |
| SAE AMS 5558H : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING 18CR - 10.5NI - 0.70CB (NB) (347) THIN WALL SOLUTION HEAT TREATED |
| SAE AMS 5762 : 2016 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 5.8MN - 17CR - 5.8NI - 2.0CU - 0.26S, FREE MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5905 : 2012 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS 5605 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 41.5NI - 16CR - 37FE - 2.9CB(NB) - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5929 : 2014 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 11.5CR -10NI - 1.0AL - 0.5TI - 1.0CU - 1.0W, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5786 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62.5NI - 5.0CR - 24.5MO - 5.5FE |
| SAE AMS 5548 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP, 16.5CR - 4.5NI - 2.9MO - 0.10N, 1850 TO 1975 DEGREES F (1010 TO 1079 DEGREES C) ANNEALED |
| SAE AMS 5525 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED |
| SAE AMS 5682 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 78NI - 20CR |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AS7245:2012 | INSERTS, SCREW THREAD, HELICAL COIL 19CR-9.2NI, CORROSION RESISTANT STEEL, PROCUREMENT SPECIFICATION FOR |
| SAE AMS 5830 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 35FE |
| SAE AMS 5668 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 7.0FE - 2.5TI - 1.0CB (NB) - 0.70AL, 2100 DEGREES F (1149 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 7493 : 2012 | RINGS, FLASH WELDED FERRITIC AND MARTENSITIC CORROSION-RESISTANT STEELS |
| SAE AMS 5837G : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62NI - 21.5CR - 9.0MO - 3.7CB(NB) |
| SAE AMS 5925 : 2012 | STEEL, CORROSION -RESISTANT, BARS, WIRE, AND FORGINGS, 15.5CR - 1.8MO - 0.20N (0.37 - 0.45C), ELECTROSLAG REMELTED |
| SAE AMS 5835 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 72NI - 3.2MN - 20CR - 2.5CB - 0.48TI, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AS 5685 : 2015 | STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR-11.5NI (UNS S30500), SOLUTION HEAT TREATED, COLD FINISHED |
| SAE AMS 5683:2012(S2017) | ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT, 75NI - 15.5CR - 8.0FE |
| SAE AMS 5738 : 2013 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9NI (SAE 30303F), FREE MACHINING, HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 5744 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 15.5CR - 4.5NI - 2.9MO - 0.10N, HEAT TREATED, 170 KSI (1172 MPA) TENSILE STRENGTH |
| SAE AMS 5627 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR (SAE 51430), ANNEALED |
| SAE AMS 5932 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS AND TUBING 14.5CR - 2.3NI - 12.5CO - 4.0MO - 0.60V - 0.03CB(NB), CARBURIZING, PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED |
| SAE AMS 5517 : 2010 | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 18CR - 8NI (301) COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5544 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 57NI - 19.5CR - 13.5CO - 4.2MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE AMS 4731 : 2012 | NICKEL-COPPER ALLOY WIRE AND RIBBON, CORROSION-RESISTANT, 67NI - 31CU, ANNEALED |
| SAE AMS 5612 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, ANNEALED |
| SAE AMS 5504 : 2018 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12.5Cr (410) Annealed |
| SAE AMS 5596 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, FOIL AND PLATE, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5597 : 2016 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5547 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP, 15.5CR - 4.5NI - 2.9MO - 0.10N, SOLUTION HEAT TREATED |
| SAE AMS 5915 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE |
| SAE AMS 5671 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5556 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED |
| SAE AMS 5940 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 34CO - 3.0CR - 28NI - 3.0CB(NB) - 5.5AL - 0.008B - 25.5FE MULTIPLE MELTED, HIGH TEMPERATURE, OXIDATION-RESISTANT, LOW EXPANSION SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| MIL-N-62418 Base Document:1992 | NICKEL BASE ALLOY, SHEET & PLATE CORROSION & HEAT RESISTANT, SOLUTION HEAT TREATED (HAYNES 230) (METRIC) |
| SAE AMS 4730 : 2017 | NICKEL-COPPER ALLOY WIRE, CORROSION-RESISTANT, 67NI - 31CU ANNEALED (400) |
| SAE AMS5659S : 2016 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE AMS 5749 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING 14.5CR - 4.0MO - 1.2V (1.10-1.20C) PREMIUM QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 5689 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
| SAE AMS 5664 : 2017 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5810 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, FLAT WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED, COLD DRAWN OR COLD ROLLED AND AGED, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5708 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE FORGINGS, AND RINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREES F (1079 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5887 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE AMS 5746 : 2012 | ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5831 : 2015 | ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05ZR - 0.05LA - 0.20N |
| SAE AMS 5912 : 2014 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS 5884 : 2016 | IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS, 42FE - 37.5NI - 14CO - 4.8CB(NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION |
| SAE AMS 5607 E: 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 73NI - 7.0CR - 16.5MO, SOLUTION HEAT TREATED |
| SAE AMS 5964 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED |
| SAE AMS 5608 : 2016 | COBALT ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED |
| SAE AMS 5784 : 2011 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 29CR - 9.5NI |
| SAE AMS 5812 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 7.1NI - 2.4MO - 1.0AL, VACUUM INDUCTION MELTED |
| SAE AMS 5774 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS 5759M : 2015 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGING STOCK, FORGINGS, AND RINGS 52CO - 20CR - 10NI - 15W |
| SAE AMS 5513 : 2015 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.2NI (SAE 30304), SOLUTION HEAT TREATED |
| SAE AMS 5817 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 13CR - 2.0NI - 3.0W |
| SAE AMS 5692 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 12.5NI - 2.5MO |
| SAE AMS 5687N : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 74NI - 15.5CR - 8.0FE, ANNEALED |
| SAE AMS 5825 : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB(NB) - 3.6CU |
| SAE AMS 5662 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5869 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE 62NI - 21.5CR - 9.0MO - 3.7CB SOLUTION HEAT TREATED |
| SAE AMS 5904 : 2012 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 1/2 HARD, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 5540 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 74NI - 15.5CR - 8.0FE, ANNEALED |
| SAE AMS 5789 : 2014 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE 54CO - 25.5CR - 10.5NI - 7.5W |
| SAE AMS 5776 : 2008(R2015) | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR (SAE 51410) |
| SAE AMS 5829 : 2011 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 56NI - 19.5CR - 16.5CO - 2.5TI - 1.5AL, VACUUM INDUCTION MELTED |
| SAE AMS 5818 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 9.0MN - 20CR - 6.2NI - 0.20N |
| SAE AMS 5769 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB+TA) - 0.15N - 32FE SOLUTION HEAT TREATED |
| SAE AMS 5563 : 2012 | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED TUBING, 19CR - 9.5NI (SAE 30304), COLD DRAWN, 1/4 HARD TEMPER |
| SAE AMS 5591 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, TUBING, SEAMLESS, 12.5CR (SAE 51410), ANNEALED |
| SAE AMS 5707 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5690 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS 5814 : 2011 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 52CO - 20CR - 20NI - 7.5TA, VACUUM MELTED |
| SAE AMS 5833 : 2014 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE SOLUTION HEAT TREATED AND COLD DRAWN |
| SAE AMS 5768 : 2018 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5876 : 2018 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, STRIP, 20CR - 15NI - 40CO - 7.0MO - 16FE, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED AND COLD ROLLED |
| SAE AMS 5542 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, ANNEALED |
| SAE AMS 5700G : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED |
| SAE AMS 5584 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS AND WELDED HYDRAULIC TUBING, 17CR - 12NI - 1.5MO - 0.03C MAX, COLD DRAWN, 1/8 HARD TEMPER |
| SAE AMS 5919 : 2013 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED, MODIFIED STRENGTH |
| SAE AMS 5645 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE AMS 5955 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 10CR - 12NI - 2MO - 1.45AL - 1.15TI VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5933 | STEEL, CORROSION RESISTANT BARS AND FORGINGS, 12.5CR - 1.0NI - 15.5CO - 2.0MO, VACUUM INDUCTION PLUS, VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5894 : 2016 | COBALT ALLOYS, BARS, SHEET, AND PLATE, 60CO - 28CR - 4.5W - 1.15C, SOLUTION HEAT TREATED |
| SAE AMS 5506 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR (0.30 - 0.40C) (420), ANNEALED |
| SAE AS 7207 : 2012 | SPRING PINS, TUBULAR, SLOTTED CORROSION AND MODERATE HEAT RESISTANT STEEL PROCUREMENT SPECIFICATION FOR |
| SAE AMS 5670 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5754 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 7726 H : 2000(S2017) | IRON-NICKEL-COBALT ALLOY, WIRE, 53FE - 2.9NI - 17CO, LOW EXPANSION, GLASS SEALING, ANNEALED |
| SAE AMS 5651 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED |
| SAE AMS 5822 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V, VACUUM INDUCTION MELTED |
| SAE AMS 5805 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.004B - 0.30V, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5702 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5441 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 7718 : 2015 | NICKEL-IRON ALLOY, MAGNETIC, BARS, RODS, TUBING, AND FORGINGS 50NI - 50FE |
| SAE AMS 4574F : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, TUBING, SEAMLESS 67NI - 31CU ANNEALED |
| SAE AMS 5794 : 2002(R2013) | IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 31FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N, ANNEALED |
| SAE AMS 5771 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 7.0CR - 16.5 MO, SOLUTION HEAT TREATED |
| SAE MAM 5706 : 2003 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4A1 - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 995 DEGREES - 1040 DEGREES C SOLUTION HEAT TREATED |
| SAE AMS 5582 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE TO 155 KSI (1069 MPA) TENSILE STRENGTH |
| SAE AMS 5863E : 2009(R2015) | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 6.5NI - 0.75MO - 0.60CB - 1.5CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5593 : 2016 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5600 : 2007 | STEEL, CORROSION-RESISTANT, SHEET, LAMINATED, EDGE BONDED |
| SAE AMS 5858 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, MULTIPLE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
| SAE AMS 5652J : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED |
| SAE AMS5922B | STEEL, CORROSION-RESISTANT, BARS, AND FORGINGS, 10CR - 5.5NI - 14CO - 2MO - 1W (0.19-0.23C), VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED, ANNEALED |
| SAE AMS 7717 : 2015 | NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP, 50NI - 50FE, ANNEALED, FORMING GRADE |
| SAE AMS 5560 : 2016 | STEEL, CORROSION RESISTANT, SEAMLESS TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5639 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| SAE AMS 5871 : 2015 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 21CR - 32.5NI - 0.38TI - 0.38AL - 45FE, SOLUTION HEAT TREATED |
| SAE AMS 5595 : 2014 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 9.0MN - 20CR - 6.5NI - 0.28N, SOLUTION HEAT TREATED |
| SAE AMS 5660 : 2015 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 34FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5699 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, SPRING TEMPER, PRECIPITATION HARDENABLE |
| SAE AMS 5832 : 2015 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB(NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 5811 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 30NI - 1.2MO - 2.2TI - 0.25AL - 0.001B - 0.030V (0.01 - 0.03C), VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5923 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS,17CR - 0.52MO (0.95 - 1.20C) (SAE 51440C), FOR BEARING APPLICATIONS |
| SAE AMS 5666H : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED |
| SAE AMS 4676 : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
| SAE AMS 5647 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
| SAE AMS 5537 : 2017 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, FOIL, AND PLATE, 52CO - 20CR - 10NI - 15W, SOLUTION HEAT TREATED |
| SAE AMS 5758 : 2014 | ALLOY, CORROSION-RESISTANT, BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
| SAE AMS 5580 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 74NI - 15.5CR - 8.0FE, ANNEALED |
| SAE AMS 5505 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 12CR (410 MODIFIED), FERRITE CONTROLLED, ANNEALED |
| SAE AMS 5898 : 2018 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 15.2CR - 1.0MO - 0.40N - (0.28 - 0.34C), CONSUMABLE ELECTRODE MELTED UNDER PRESSURE |
| SAE AMS 5559 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.40TI (SAE 30321), THIN WALL, SOLUTION HEAT TREATED |
| MIL-N-62623 Base Document:1988 | NICKEL BASE ALLOY, SHEET, CORROSION AND HEAT RESISTANT |
| SAE AMS 5790 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 20CR - 10NI - 0.75CB, HIGH FERRITE GRADE |
| SAE AMS 5606 : 2013 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5840 : 2010 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 13CR - 8.0NI - 2.3MO - 1.1AL, VACUUM MELTED |
| SAE AMS 5599 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 62NI - 21.5CR - 9.0MO - 3.7 CB (NB), ANNEALED |
| SAE AMS 5712 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5773 : 2012 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.30 CB (NB) - 1.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5598 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 72NI - 15.5CR - 0.95 (CB (NB) + TA) - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE, REMELTED OR VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5698 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, NO. 1 TEMPER, PRECIPITATION HARDENABLE |
| SAE AMS 4677 : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
| SAE AMS 5877 : 2012 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
| SAE AMS 5906C : 2018 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, FULL HARD, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS 5859 : 2012 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 6.5NI - 0.75MO - 0.30CB - 1.5CU, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS7728J : 2000(2017) | IRON-NICKEL-COBALT ALLOY, SHEET, STRIP, AND PLATE, 53FE - 29NI - 17CO, LOW EXPANSION GLASS SEALING, ANNEALED |
| SAE AMS 5661 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 42.5NI - 12.5CR - 5.8MO - 2.9TI - 0.015B - 35FE - CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5616 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 13CR - 2.0NI - 3.0W ANNEALED |
| SAE AMS 5896 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.55TI (321), SOLUTION HEAT TREATED AND COLD DRAWN, 1/8 HARD TEMPER |
| SAE AMS 5901B:2008 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 8NI (SAE 30301), SOLUTION HEAT TREATED |
| SAE AMS5554G:2016 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 16.5CR - 4.5NI - 2.9MO - 0.10N, ANNEALED |
| SAE AMS 5950 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5717 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE SOLUTION HEAT TREATED |
| SAE AMS 5918 : 2011 | COBALT ALLOY, CORROSION AND HEAT RESISTANT, BARS, 62CO - 28CR - 6MO, WARM-WORKED |
| SAE AMS 5714 : 2018 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE |
| SAE AMS 5676 : 2011 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 80NI - 20CR |
| SAE AMS 5585 : 2016 | ALLOY, CORROSION AND HEAT RESISTANT, WELDED TUBING, 32FE - 21CR - 20NI - 20CO - 3MO - 2.5W - 1.0CB (NB) - 0.15N, SOLUTION HEAT TREATED |
| SAE AMS 5718E : 2016 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED |
| SAE AMS 5686 : 2012 | STEEL, CORROSION RESISTANT, RIVET WIRE, 18CR - 11.5NI (SAE 30305), SOLUTION HEAT TREATED |
| SAE AMS 5512 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 10.5NI - 0.80CB (SAE 30347), SOLUTION HEAT TREATED |
| SAE AMS 5613 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 12.5CR (SAE 51410) ANNEALED |
| SAE AMS 5592 : 2013 | IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 44FE - 18.5CR - 35NI - 1.15SI, SOLUTION HEAT TREATED |
| SAE AMS 5920 : 2013 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED AND AGED, MODIFIED STRENGTH |
| SAE ARP 1917 : 2002 | CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS |
| SAE AMS 2374 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING CORROSION AND HEAT-RESISTANT STEEL AND ALLOY FORGINGS |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.