SAE AMS 2242 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TOLERANCES, CORROSION AND HEAT RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY SHEET, STRIP, AND PLATE
Available format(s)
Hardcopy , PDF
Superseded date
30-10-2020
Superseded by
Language(s)
English
Published date
01-12-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. THICKNESS
3. WIDTH
4. LENGTH
5. STRAIGHTNESS
6. FLATNESS
7. NOTES
Describes established manufacturing tolerances applicable to sheet, strip, and plate of corrosion and heat resistant steels, iron alloys, titanium, and titanium alloys ordered to inch dimensions.
| Committee |
AMS-F
|
| DevelopmentNote |
Supersedes SAE MAM 2242. (10/2007)
|
| DocumentType |
Revision
|
| Pages |
9
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS4901T | TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY PURE, ANNEALED, 70.0 KSI (485 MPA) |
| SAE AMS5524L | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE 18CR - 13NI - 2.5MO (SAE 30316) SOLUTION HEAT TREATED |
| SAE AMS4916L | TITANIUM ALLOY SHEET, STRIP, AND PLATE 8AL - 1MO - 1V DUPLEX ANNEALED |
| SAE AMS5874C | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05ZR - 0.05LA - 0.20N SOLUTION HEAT TREATED |
| SAE AMS 5546 : 1990(S2017) | STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5CR - 4.5NI - 2.9MO - 0.10N COLD ROLLED, TEMPERED |
| SAE AMS4905F | TITANIUM ALLOY, DAMAGE-TOLERANT GRADE PLATE, 6AL - 4V, BETA ANNEALED |
| SAE AMS7851D | COLUMBIUM (NIOBIUM) ALLOY FOIL, SHEET, STRIP, AND PLATE, 10W - 2.5ZR, RECRYSTALLIZED |
| SAE AMS 6945 : 2014 | TITANIUM ALLOY, SINGLE MELT, SHEET, STRIP, AND PLATE 6AL - 4V ANNEALED |
| SAE AMS7849E | TANTALUM SHEET, STRIP, AND PLATE, ANNEALED |
| SAE AMS4990C | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 6V - 2SN, SOLUTION HEAT TREATED AND AGED |
| SAE AMS5902C | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 8NI (SAE 30301), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS5223F | IRON-NICKEL ALLOY, STRIP, 49Fe 5.3Cr 42Ni 2.5Ti 0.55Al, SOLUTION HEAT TREATED, COLD ROLLED, 10% REDUCTION |
| SAE AMS7898D | Tungsten Sheet, Strip, Plate, and Foil, Pressed, Sintered, and Wrought |
| SAE AMS5503F | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 17CR (SAE 51430) ANNEALED |
| SAE AMS7852C | COLUMBIUM (NIOBIUM) ALLOY SHEET, STRIP, AND PLATE, 10HF - 1.0TI |
| SAE AMS4914F | TITANIUM ALLOY COLD ROLLED SHEET AND STRIP, 15V - 3AL - 3CR - 3SN, SOLUTION HEAT TREATED |
| SAE AMS4907K | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6.0AL - 4.0V, EXTRA LOW INTERSTITIAL, ANNEALED |
| SAE AMS5507G | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 13NI - 2.5MO (316L), SOLUTION HEAT TREATED |
| SAE AMS5903B | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 1/4 HARD, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS4941G | TITANIUM TUBING, WELDED, 40 KSI (276 MPA) YIELD STRENGTH |
| SAE AMS 6946 : 2014 | TITANIUM ALLOY, SHEET, STRIP, AND PLATE 4AL - 2.5V - 1.5FE, ANNEALED |
| SAE AMS5910B | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.2NI (SAE 30304) COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 4903 : 2015 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 4V, SOLUTION HEAT TREATED |
| SAE AMS4898D | TITANIUM ALLOY, SHEET, 6AL - 2SN - 2ZR - 2MO - 2CR - 0.15SI, ANNEALED |
| SAE AMS5906D | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength |
| SAE AMS4905G | Titanium Alloy, Damage-Tolerant Grade Plate 6Al - 4V, Extra Low Interstitial (ELI) Beta Annealed |
| SAE AMS5221E | IRON-NICKEL ALLOY STRIP 49FE - 5.3CR - 42NI - 2.5TI - 0.55AL SOLUTION HEAT TREATED |
| SAE AMS7717E | NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP, 50NI - 50FE, ANNEALED, FORMING GRADE |
| SAE AMS 6953 : 2018 | TITANIUM ALLOY SHEET, 6AL - 4SN - 3NB - 0.5MO - 0.3SI, DUPLEX ANNEALED |
| SAE AMS5907B | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 12NI - 2.5MO (SAE 30316), COLD ROLLED, 1/4 HARD, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS5515L | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 8.5NI (302), SOLUTION HEAT TREATED, HIGH DUCTILITY |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE |
| SAE AMS5604J | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 16.5CR - 4.0NI - 4.0CU - 0.30CB, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMST9046B | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP, AND PLATE |
| SAE AMS6544D | STEEL, PLATE, 2.0CR - 10NI - 8.0CO - 1.0MO (0.10 - 0.14C) (HY-180), DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED |
| SAE AMS5532H | IRON ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 30FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB(NB) - 0.15N, SOLUTION HEAT TREATED |
| SAE AMS5913B | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304), COLD ROLLED, FULL HARD, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS5510S | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS4911P | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED |
| SAE AMS5525J | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED |
| SAE AMS5911B | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304) COLD ROLLED, 1/2 HARD, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS5508F | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR - 2.0NI - 3.0W, ANNEALED |
| SAE AMS 5864 : 2013 | STEEL, CORROSION-RESISTANT, PLATE 13CR - 8.0NI - 2.2MO - 1.1AL VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS4909K | TITANIUM ALLOY, SHEET, STRIP, AND PLATE 5AL - 2.5SN, EXTRA LOW INTERSTITIAL ANNEALED |
| SAE AMS 4939C : 2017 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED |
| SAE AMS5860F | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 12CR - 8.5NI - 0.30CB - 1.1TI - 2.0CU, MULTIPLE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| MIL S 8955 : 0 | STEEL PLATE, SHEET AND STRIP PH 15-7 MO CORROSION RESISTANT, PRECIPITATION HARDENING |
| SAE AMS5225F | IRON-NICKEL ALLOY, STRIP, 49FE - 5.3CR - 42NI - 2.5TI - 0.55AL, SOLUTION HEAT TREATED, COLD ROLLED, 50% REDUCTION |
| SAE AMS4919H | TITANIUM ALLOY SHEET, STRIP, AND PLATE 6AL - 2SN - 4ZR - 2MO - 0.08SI DUPLEX ANNEALED |
| SAE AMS5595G | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 9.0MN - 20CR - 6.5NI - 0.28N, SOLUTION HEAT TREATED |
| SAE AMS 6951 : 2017 | TITANIUM ALLOY, SHEET 5AL - 4V - 0.75MO - 0.5FE ANNEALED |
| SAE AMS 5529 : 2012 | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED AND COLD ROLLED, PRECIPITATION HARDENABLE, 0.0015 TO 0.100 INCH (0.038 TO 2.54 MM) NOMINAL THICKNESS |
| SAE AMS5514G | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 18CR - 11.5NI (SAE 30305) SOLUTION HEAT TREATED |
| SAE AMS4917J | TITANIUM ALLOY SHEET, STRIP, AND PLATE 13.5V - 11CR - 3.0AL - SOLUTION HEAT TREATED |
| SAE AMS5511H | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.5NI (304L), SOLUTION HEAT TREATED |
| SAE AMS5516P | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED |
| SAE AMS5528H | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5517L | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 18CR - 8NI (301) COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS5549H | STEEL, CORROSION AND HEAT RESISTANT, PLATE 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED |
| SAE AMS5518M | STEEL, CORROSION RESISTANT, SHEET AND STRIP 18CR - 8NI COLD ROLLED, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS7719E | NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP, 50NI - 50FE, STAMPING QUALITY, HALF-HARD TEMPER |
| SAE AMS5905B | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS5548P | STEEL, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP, 16.5CR - 4.5NI - 2.9MO - 0.10N, 1850 TO 1975 DEGREES F (1010 TO 1079 DEGREES C) ANNEALED |
| SAE AMS5501E | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND FOIL, 19CR - 9.5NI (304), COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 4940 : 2017 | TITANIUM SHEET, STRIP, AND PLATE COMMERCIALLY PURE ANNEALED, 25.0 KSI (172 MPA) YIELD STRENGTH |
| SAE AMS5504N | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12.5Cr (410) Annealed |
| SAE AMS 5547 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP, 15.5CR - 4.5NI - 2.9MO - 0.10N, SOLUTION HEAT TREATED |
| SAE AMS4908G | TITANIUM ALLOY, SHEET AND STRIP 8MN ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH |
| SAE AMS5912B | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS4915M | TITANIUM ALLOY SHEET, STRIP, AND PLATE 8AL - 1V - 1MO SINGLE ANNEALED |
| SAE AMS4897D | TITANIUM ALLOY, SHEET AND STRIP, 15MO - 3.0AL - 2.8CB - 0.20SI |
| SAE AMS 4989 : 2014 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 3AL - 2.5V, ANNEALED |
| SAE AMS5513J | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.2NI (SAE 30304), SOLUTION HEAT TREATED |
| SAE AMS4918N | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 6V - 2SN, ANNEALED |
| SAE AMS 4904 : 2015 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 4V, SOLUTION HEAT TREATED AND AGED |
| SAE AMS5904B | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 1/2 HARD, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 7847D : 2015 | TANTALUM ALLOY SHEET, STRIP, AND PLATE, 90TA - 10W |
| SAE AMS4910R | TITANIUM ALLOY, SHEET, STRIP, AND PLATE 5AL - 2.5SN ANNEALED |
| SAE AMS5506G | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR (0.30 - 0.40C) (420), ANNEALED |
| SAE AMS5862M | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS5863E | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 6.5NI - 0.75MO - 0.60CB - 1.5CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 7717 : 2015 | NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP, 50NI - 50FE, ANNEALED, FORMING GRADE |
| SAE AMS5593G | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 4988 : 2014 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 6V - 2SN, SOLUTION HEAT TREATED |
| SAE AMS5519N | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 18CR - 8NI (SAE 30301) COLD ROLLED, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS5505F | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 12CR (410 MODIFIED), FERRITE CONTROLLED, ANNEALED |
| SAE AMS5858D | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, MULTIPLE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
| SAE AMS4900P | TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY PURE, ANNEALED, 55.0 KSI (379 MPA) YIELD STRENGTH |
| SAE AMS5906C | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, FULL HARD, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS5859D | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 6.5NI - 0.75MO - 0.30CB - 1.5CU, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS4902K | TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY-PURE, ANNEALED 40.0 KSI (276 MPA) YIELD STRENGTH |
| SAE AMS7850E | COLUMBIUM (NIOBIUM) SHEET, STRIP, AND FOIL |
| SAE AMS4899D | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 4.5AI - 3V - 2FE - 2MO, ANNEALED |
| SAE AMS 5901B:2008 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 8NI (SAE 30301), SOLUTION HEAT TREATED |
| SAE AMS6949 | TITANIUM ALLOY, SHEET AND STRIP, 4AL - 2.5V - 1.5FE, ELECTRON BEAM SINGLE MELTED. ANNEALED |
| SAE AMS5512L | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 10.5NI - 0.80CB (SAE 30347), SOLUTION HEAT TREATED |
| SAE AMS5592F | IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 44FE - 18.5CR - 35NI - 1.15SI, SOLUTION HEAT TREATED |
| SAE AMS4990D | Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated and Aged |
| SAE AMS6949A | Titanium Alloy, Sheet and Strip 4Al - 2.5V - 1.5Fe Electron Beam Single Melted. Annealed |
| SAE AMS6949B:2024 | Titanium Alloy, Sheet and Strip, 4Al - 2.5V - 1.5Fe, Electron Beam Single Melted. Annealed |
| SAE AMS5903D | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.