SAE AIR 2000 : 2000
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AEROSPACE FLUID SYSTEM STANDARDS, METRIC, NATIONAL AND INTERNATIONAL
Available format(s)
Hardcopy , PDF
Superseded date
11-08-2020
Superseded by
Language(s)
English
Published date
01-01-2000
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 SCOPE
2 REFERENCES
3 APPROVED METRIC FLUID SYSTEM STANDARDS
4 FLUID SYSTEM STANDARDS
5 NOTES
The purpose of this aerospace information report is to provide a listing of national and international metric standards for use in aerospace fluid systems with their equivalent SAE inch, International ISO, and European AECMA standards.
| Committee |
G 3
|
| DocumentType |
Standard
|
| Pages |
39
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AIR 5426 : 2013 | FITTING AND FITTING ASSEMBLY SELECTION, INSTALLATION, INSPECTION AND MAINTENANCE OF |
| SAE AIR 797 : 2013 | HOSE CHARACTERISTICS AND SELECTION CHART |
| ISO 2964:1985 | Aerospace — Tubing — Outside diameters and thicknesses — Metric dimensions |
| ISO 1465:1989 | Aircraft Liquid oxygen replenishment couplings Mating dimensions |
| PREN 3561 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - FERRULES WITH DYNAMIC BEAM SEAL END, WELDED AND REDUCED AT PIPE END |
| PREN 2656 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS UP TO 56000 KPA - FITTING END, WELDED - GEOMETRICAL CONFIGURATION |
| PREN 4194 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD |
| ISO 7320:1992 | Aerospace Couplings, threaded and sealed, for fluid systems Dimensions |
| ISO 8913:2006 | Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) Procurement specification |
| ISO 5884:1987 | Aerospace Fluid systems and components Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
| ISO 3174:1994 | Aircraft — Connections for checking hydraulic systems by ground appliances — Threaded type |
| PREN 4028 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, SWIVEL NUT ON RUN |
| PREN 4183 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, DOUBLE, WELDED |
| PREN 4184 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 45 DEGREE, DOUBLE, WELDED |
| ISO 4153:1981 | Aircraft — Pressure fuel dispensing system — Test procedure and limit value for shut-off surge pressure |
| PREN 3691 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG, WELDED |
| ISO 5855-1:1999 | Aerospace MJ threads Part 1: General requirements |
| PREN 4020 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES, WELDED END WITH THRUST WIRE NUT |
| PREN 2245 : 2 | AEROSPACE SERIES - PIPELINES FOR LIQUIDS AND GASES - DEFINITIONS |
| ISO 11:1987 | Aircraft — Ground pressure testing connections for pressure cabins |
| PREN 3576 : 200P2 | AEROSPACE SERIES - PTFE FLEXIBLE HOSE ASSEMBLY OF A NOMINAL PRESSURE EQUAL TO 10500 KPA WITH 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| PREN 3273 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - DYNAMIC BEAM SEAL END FOR ELBOWS, TEES AND CROSSES - GEOMETRIC CONFIGURATION |
| PREN 4030 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD RUN |
| PREN 3854 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL IN TITANIUM ALLOY TI-P64001 - FERRULES, WELDED |
| ISO 7319:1992 | Aerospace Fluid systems Interface of 24 degree cone metric couplings |
| ISO 485:1973 | Aircraft water-methanol pressure connections |
| ISO 7314:2002 | Aerospace — Fluid systems — Metal hose assemblies |
| PREN 2901 : 200P2 | AEROSPACE SERIES - CLAMPS, LOOP ("P" TYPE) WITH RUBBER CUSHIONING IN CORROSION RESISTING STEEL - DIMENSIONS - MASSES |
| PREN 3269 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - BLIND FERRULES WITH DYNAMIC BEAM SEAL END |
| PREN 3635 : 200P2 | AEROSPACE SERIES - WELD LIP - GEOMETRICAL CONFIGURATION |
| ISO 8625-2:1991 | Aerospace Fluid systems Vocabulary Part 2: General terms and definitions relating to flow |
| ISO 1034:1973 | Aircraft — Ground air-conditioning connections |
| PREN 3267 : 200P1 | AEROSPACE SERIES - WASHER, BULKHEAD IN TITANIUM ALLOY |
| ISO 3323:1987 | Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved |
| ISO 2026:1974 | Aircraft Connections for starting engines by air |
| PREN 3268 : 200P3 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| PREN 3855 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL IN TITANIUM ALLOY TI-P64001 - CAPS |
| PREN 4026 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES |
| PREN 4032 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - THRUST WIRE |
| ISO 7313:1984 | Aircraft High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) |
| PREN 2253 : 2 | AEROSPACE SERIES - FLEXIBLE HOSE ASSEMBLIES IN ELASTOMERS - TYPE 1 - TECHNICAL SPECIFICATION |
| ISO 2685:1998 | Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones |
| ISO 8775:1988 | Aerospace Gaseous oxygen replenishment connection for use in fluid systems (new type) Dimensions (Inch series) |
| TR 4053 : 1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS IN TITANIUM ALLOY - ASSEMBLY RECOMMENDATIONS |
| ISO 10583:1993 | Aerospace fluid systems — Test methods for tube/fitting assemblies |
| PREN 3566 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ADAPTERS WITH LOCKING RING |
| ISO 6771:2007 | Aerospace — Fluid systems and components — Pressure and temperature classifications |
| PREN 4019 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, WELDED |
| PREN 2900 : 200P2 | AEROSPACE SERIES - CLAMPS - TECHNICAL SPECIFICATION |
| PREN 4025 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 MINUTES, BULKHEAD |
| PREN 3867 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGES IN TITANIUM ALLOY TI-P64001 |
| PREN 3243 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - FERRULE, WELDED, WITH DYNAMIC BEAM SEAL END |
| ISO 12:1987 | Aerospace — Pipelines — Identification |
| ISO 102:1990 | Aircraft — Gravity filling orifices |
| PREN 4023 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREES |
| PREN 3631 : 200P2 | AEROSPACE SERIES - FLUID FITTINGS, FLAGED, 90 DEGREES ELBOWED - SEALING BY O-RING FOR 0,8 MM THICK TUBES |
| PREN 3247 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, WELDED |
| PREN 3245 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, REDUCER |
| PREN 3853 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, THREADED |
| ISO 4412-1:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps |
| ISO 9526:1990 | Fruits, vegetables and derived products — Determination of iron content by flame atomic absorption spectrometry |
| ISO 7315:1988 | Aerospace "P" clamps (loop clamps) for fluid systems Envelope dimensions |
| ISO 9206:2016 | Aerospace series Constant displacement hydraulic motors General specifications |
| ISO 5859:2014 | Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components |
| PREN 4031 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - NUTS FOR WELDED UNION |
| PREN 3717 : 200P1 | AEROSPACE SERIES - TUBES - SELECTION FOR ENGINES FLUID SYSTEMS |
| PREN 4022 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, WELDED |
| ISO 6772:2012 | Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies |
| ISO 11217:1993 | Aerospace Hydraulic system fluid contamination Location of sampling points and criteria for sampling |
| ISO 9634:1994 | Aerospace Fluid systems Dimensions of plastic protective caps and plugs |
| PREN 4185 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD LONG |
| PREN 4182 : 200P1 | PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEE, REDUCED |
| ISO 8625-1:1993 | Aerospace Fluid systems Vocabulary Part 1: General terms and definitions related to pressure |
| PREN 4187 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG |
| PREN 4191 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH, LONG |
| PREN 3718 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES |
| PREN 3857 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - ELBOWS 90 DEGREES, WELDED |
| PREN 4188 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG, WELDED |
| ISO 11218:2017 | Aerospace Cleanliness classification for hydraulic fluids |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| PREN 3856 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS FOR THRUST WIRE |
| PREN 3788 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - PROTECTIVE CAPS |
| ISO 7661:1984 | Aerospace — Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing — Metric series |
| ISO 5855-3:1999 | Aerospace MJ threads Part 3: Limit dimensions for fittings for fluid systems |
| ISO 7258:1984 | Polytetrafluoroethylene (PTFE) tubing for aerospace applications Methods for the determination of the density and relative density |
| PREN 3689 : 200P1 | AEROSPACE SERIES - T-RING FILLERS IN TITANIUM ALLOY FOR WELDING PIPES - 28000 KPA NOMINAL PRESSURE |
| PREN 3852 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, WELDED, THREADED |
| PREN 3264 : 200P3 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - THRUST WIRE NUTS |
| PREN 3274 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - THREAD END - GEOMETRIC CONFIGURATION |
| PREN 3246 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD |
| PREN 4186 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - CROSS UNIONS |
| TR 4052 : 1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY - ASSEMBLY RECOMMENDATIONS |
| PREN 3633 : 200P1 | AEROSPACE SERIES - INSTALLATION HOLE FOR FLUID FITTINGS, FLANGED |
| PREN 3244 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, DOUBLE ENDED |
| PREN 3789 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - PROTECTIVE PLUGS WITH EXTERNAL THREADS |
| ISO 9662:1994 | Aircraft equipment Environmental and operating conditions for airborne equipment Humidity, temperature and pressure tests |
| PREN 3688 : 200P1 | AEROSPACE SERIES - T-RING FILLERS IN TITANIUM ALLOY FOR WELDING PIPES - 14000 KPA NOMINAL PRESSURE |
| PREN 3869 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - SEALS IN FLUOROCARBON RUBBER AND ARMATURE IN ALUMINIUM ALLOY |
| PREN 3851 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS, STRAIGHT |
| PREN 3588 : 200P2 | AEROSPACE SERIES - LIGHTWEIGHT PTFE FLEXIBLE HOSE ASSEMBLY OF A NOMINAL PRESSURE EQUAL TO 28000 KPA WITH 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| PREN 2902 : 200P2 | AEROSPACE SERIES - CLAMPS, LOOP ("P" TYPE) WITH RUBBER CUSHIONING IN ALUMINIUM ALLOY - DIMENSIONS - MASSES |
| ISO 2563:2009 | Aircraft ducting and piping Profile dimensions for flanges of V-band couplings |
| PREN 2672 : 200P1 | AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION - DESIGN OF RIGID LINES |
| PREN 4189 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD BRANCH, LONG |
| ISO 9939:1994 | Aerospace Pressure re-oiling connection (new type) |
| PREN 3266 : 200P2 | AEROSPACE SERIES - PIPE COUPLING IN TITANIUM ALLOY - BULKHEAD NUTS |
| ISO 9938:1994 | Aerospace Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa Procurement specification |
| ISO 2942:2004 | Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point |
| PREN 4190 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, WITH SWIVEL NUT ON RUN |
| ISO 7257:2016 | Aircraft Hydraulic tubing joints and fittings Rotary flexure test |
| ISO 8479:1986 | Aerospace "Q" clamps (centre-mounted clamps) for fluid systems Dimensions |
| PREN 2671 : 200P1 | AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION - OUTLINE AND TERMS |
| ISO 5887:1981 | Aircraft Joints for connecting crew members' regulator masks to oxygen sources |
| ISO 10502:2012 | Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa — Technical specifications and requirements |
| PREN 3580 : 200P1 | AEROSPACE SERIES - STANDARD WEIGHT PTFE FLEXIBLE HOSE ASSEMBLY OF A NOMINAL PRESSURE EQUAL TO 21000 KPA WITH 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| PREN 3690 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG |
| PREN 3270 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - BLANKING PLUGS WITH LOCKING RING |
| PREN 4051 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY - PORT CONNECTION |
| ISO 7137:1995 | Aircraft — Environmental conditions and test procedures for airborne equipment |
| PREN 3858 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - THRUST WIRES IN STEEL FE-PA13 |
| PREN 3275 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES UP TO 28000 KPA DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION |
| PREN 2903 : 200P2 | AEROSPACE SERIES - CLAMPS - WORM DRIVE - DIMENSIONS - MASSES |
| PREN 3630 : 200P1 | AEROSPACE SERIES - FLUID FITTINGS, FLANGED, STRAIGHT - SEALING BY O-RING FOR 0,8 MM THICK TUBES |
| ISO 9538:2017 | Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test |
| ISO 8574:2004 | Aerospace Hydraulic system tubing Qualification tests for bent tubes |
| PREN 2904 : 200P2 | AEROSPACE SERIES - CLAMPS - SADDLE IN ALUMINIUM ALLOY - DIMENSIONS - MASSES |
| ISO 1023:1974 | Aircraft High pressure air charging valves |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| PREN 3868 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGE CONNECTORS, WELDED, IN TITANIUM ALLOY TI-P64001 |
| PREN 3272 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - DYNAMIC BEAM SEAL END FOR NIPPLE, WELDED - GEOMETRIC CONFIGURATION |
| ISO 45:1990 | Aircraft — Pressure refuelling connections |
| PREN 4021 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD |
| PREN 4024 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 45 DEGREE WELDED END WITH THRUST WIRE NUT |
| PREN 4029 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES BULKHEAD BRANCH |
| ISO 451:1976 | Aircraft Pressure re-oiling connection |
| PREN 3658 : 200P1 | AEROSPACE SERIES - TUBE BEND RADII, FOR ENGINE APPLICATION - DESIGNSTANDARD |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| ISO 450:1976 | Aircraft — Connection for water of drinkable quality |
| PREN 3248 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ADAPTERS, REDUCED PIPE END WITH LOCKING RING |
| ISO 8278:2016 | Aerospace series Hydraulic, pressure compensated, variable delivery pumps General requirements |
| PREN 3663 : 200P1 | AEROSPACE SERIES - PIPE COUPLING - O-RINGS IN ACRYLONITRILE-BUTADIENE ELASTOMER (NBR), 75 IRHD, TEMPERATURE RANGE: -55 DEGREES C TO 135 DEGREES C |
| PREN 2673 : 200P1 | AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION, RIGID LINES - MANUFACTURE |
| PREN 4017 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE |
| ISO 4412-2:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors |
| PREN 4027 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BRANCH WITH SWIVEL NUT |
| PREN 4192 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH |
| PREN 3572 : 200P1 | AEROSPACE SERIES - PTFE FLEXIBLE HOSE ASSEMBLY WITH CONVOLUTED INNER TUBE OF A NOMINAL PRESSURE UP TO 6800 KPA AND 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| ISO 8625-3:1991 | Aerospace Fluid systems Vocabulary Part 3: General terms and definitions relating to temperature |
| ISO 3161:1999 | Aerospace — UNJ threads — General requirements and limit dimensions |
| PREN 4018 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES WITH THRUST WIRE NUT |
| ISO 8575:2016 | Aerospace — Fluid systems — Hydraulic system tubing |
| ISO 8177:2015 | Aerospace Omega clamps (saddle clamps) for fluid systems Dimensions |
| PREN 3584 : 200P2 | AEROSPACE SERIES - LIGHTWEIGHT PTFE FLEXIBLE HOSE ASSEMBLY OF A NOMINAL PRESSURE EQUAL TO 21000 KPA WITH 8 DEGREE 30 MINUTES FITTING IN TITANIUM - PRODUCT STANDARD |
| PREN 4193 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD LONG |
| ISO 6773:1994 | Aerospace Fluid systems Thermal shock testing of piping and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.