S.R. CLC/TS 50640:2015
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
CLOTHES WASHING MACHINES FOR COMMERCIAL USE - METHODS FOR MEASURING THE PERFORMANCE
Hardcopy , PDF
23-04-2021
English
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Requirements
5 Test conditions, materials, equipment and instrumentation
6 Preparation for testing
7 Performance measurements - general requirements
8 Tests for performance
9 Assessment of performance
10 Data to be reported
Annex A (normative) - Specification of stain test strips
with standardized soiling
Annex B (normative) - Reference detergents - Reference
detergent A*
Annex C (normative) - Specifications for base load -
Cotton/synthetics base loads
Annex D (normative) - Reference machine specification -
Specification of the reference washing machines
and method of use
Annex E (normative) - Reference machine programme
Definitions
Annex F (normative) - The bone-dry method of conditioning
Annex G (normative) - Folding and loading the test load
Annex H (normative) - Measuring the bath temperature
Annex I (informative) - Performance testing of gas fired
washing machines
Annex J (normative) - Performance testing of steam heated
washing machines
Annex K (normative) - Procedure to determine test load size
when rated capacity is not declared
Annex L (informative) - Uncertainty of measurements in
the present document
Annex M (normative) - Test report - Data to be reported
Annex N (informative) - Sources of materials and supplies
Bibliography
Defines methods for measuring the performance of clothes washing machines for commercial use utilizing cold and/or hot water supply and without heating or with heating devices for electricity, steam or gas.
| DocumentType |
Standard
|
| Pages |
100
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| CLC/TS 50640:2015 | Identical |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| IEC 61121:2012 | Tumble dryers for household use - Methods for measuring the performance |
| IEC 60456:2010 | Clothes washing machines for household use - Methods for measuring the performance |
| EN ISO 3759:2011 | Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011) |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| IEC 62053-21:2003+AMD1:2016 CSV | Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) |
| EN ISO 11664-2:2011 | Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) |
| EN 60704-2-4:2012 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors |
| IEC 60704-1:2010 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements |
| EN ISO 2060:1995 | Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994) |
| IEC 60704-2-4:2011 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| IEC 60734:2012 | Household electrical appliances - Performance - Water for testing |
| IEC TR 61923:1997 | Household electrical appliances - Method of measuring performance - Assessment of repeatability and reproducibility |
| ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| ISO 4319:1977 | Surface active agents — Detergents for washing fabrics — Guide for comparative testing of performance |
| CLC/TS 50594:2015 | Tumble dryers for commercial use - Methods for measuring the performance |
| ISO 3759:2011 | Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
| EN 50229 : 2015 COR 2016 | ELECTRIC CLOTHES WASHER-DRYERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
| EN 60734:2012 | Household electrical appliances - Performance - Water for testing |
| EN 1458-2:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy |
| ISO 2060:1994 | Textiles — Yarn from packages — Determination of linear density (mass per unit length) by the skein method |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| DIN 53923:1978-01 | Testing of textiles; determination of water absorption of textile fabrics |
| IEC TR 62617:2015 | Home laundry appliances - Uncertainty reporting of measurements |
| ISO 2061:2015 | Textiles Determination of twist in yarns Direct counting method |
| EN 12953-10:2003 | Shell boilers - Part 10 : Requirements for feedwater and boiler water quality |
| EN 60704-1:2010/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010) |
| ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
| EN 12127:1997 | Textiles - Fabrics - Determination of mass per unit area using small samples |
| ISO/IEC Guide 43-2:1997 | Proficiency testing by interlaboratory comparisons Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies |
| EN ISO 2061:2015 | Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.