S.R. CEN/TR 17143:2017
Current
The latest, up-to-date edition.
INTELLIGENT TRANSPORT SYSTEMS - STANDARDS AND ACTIONS NECESSARY TO ENABLE URBAN INFRASTRUCTURE COORDINATION TO SUPPORT URBAN-ITS
Hardcopy , PDF
English
01-01-2017
National Foreword
European foreword
Introduction
1 Scope
2 Terms and definitions
3 Symbols and abbreviations
4 Summary of Remit to PT1701
5 Summary of situational factors affecting the study
6 Summary of Standards framework
7 Summary of Stakeholders and structuring
8 Summary of panoptic across the board Requirements
9 Summary of communications and security requirements
10 Summary of MIS requirements
11 Summary of Traffic Management (TM) requirements
12 Summary of Urban Logistics (UL) requirements
13 Summary of architecture requirements
Annex A (informative) - Detailed Recommendations of
CEN/TC 278/PT 1701
Annex B (informative) - Objectives, strategy, philosophy
and process of the study
Annex C (informative) - Situational Factors affecting the
study
Annex D (informative) - Standards Framework
Annex E (informative) - Stakeholders and structuring
Annex F (informative) - Panoptic (Multi-category) requirements
Annex G (informative) - Multimodal Information Services (MIS)
Annex H (informative) - Traffic Management (TM)
Annex I (informative) - Urban Logistics (UL)
Annex J (informative) - Communications and Security (CS) issues
for Urban-ITS
Annex K (informative) - Urban-ITS Architecture aspects (UA)
Annex L (informative) - Other identified issues for Urban-ITS
(beyond span of CID)
Annex M (informative) - Use Cases Collated
Annex N (informative) - References
Annex O (informative) - Principal existing ITS Standards
Annex P (informative) - Outreach Responses; Outreach
contacts, contributors, and effects on Recommendations
Bibliography
Provides a pre-study providing stakeholder mapping, framework identification, gap analysis and identification of standards and related actions required to address the urban infrastructure aspects: the provision of:- a) multimodal information services; b) traffic management; c) urban logistics, that are required to support the provision of Urban-ITS.
DocumentType |
Standard
|
Pages |
644
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
CEN/TR 17143:2017 | Identical |
ISO 14817-1:2015 | Intelligent transport systems — ITS central data dictionaries — Part 1: Requirements for ITS data definitions |
EN ISO 24014-1:2015 | Public transport - Interoperable fare management system - Part 1: Architecture (ISO 24014-1:2015) |
ISO 11067:2015 | Intelligent transport systems Curve speed warning systems (CSWS) Performance requirements and test procedures |
ISO/TR 25100:2012 | Intelligent transport systems Systems architecture Harmonization of ITS data concepts |
ISO/TS 18234-2:2013 | Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 2: Syntax, semantics and framing structure (TPEG1-SSF) |
ISO/TS 17419:2014 | Intelligent transport systems Cooperative systems Classification and management of ITS applications in a global context |
ISO 17366:2013 | Supply chain applications of RFID — Product packaging |
ISO 26262-6:2011 | Road vehicles Functional safety Part 6: Product development at the software level |
ISO 11270:2014 | Intelligent transport systems Lane keeping assistance systems (LKAS) Performance requirements and test procedures |
ISO 14827-1:2005 | Transport information and control systems — Data interfaces between centres for transport information and control systems — Part 1: Message definition requirements |
ISO/IEC 15962:2013 | Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions |
ISO/TR 17185-3:2015 | Intelligent transport systems Public transport user information Part 3: Use cases for journey planning systems and their interoperation |
ISO/IEC 16022:2006 | Information technology — Automatic identification and data capture techniques — Data Matrix bar code symbology specification |
ISO/IEC 16023:2000 | Information technology International symbology specification MaxiCode |
ISO 26262-5:2011 | Road vehicles Functional safety Part 5: Product development at the hardware level |
ISO 16787:2016 | Intelligent transport systems Assisted Parking System (APS) Performance requirements and test procedures |
ISO/IEC 8825-2:2015 | Information technology ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) Part 2: |
CEN/TS 15531-5:2016 | Public transport ‐ Service interface for real‐time information relating to public transport operations ‐ Part 5: Functional service interfaces situation exchange: Situation Exchange |
ISO 24531:2013 | Intelligent transport systems — System architecture, taxonomy and terminology — Using XML in ITS standards, data registries and data dictionaries |
ISO 26262-1:2011 | Road vehicles Functional safety Part 1: Vocabulary |
ISO 14817-2:2015 | Intelligent transport systems — ITS central data dictionaries — Part 2: Governance of the Central ITS Data Concept Registry |
ISO 19147:2015 | Geographic information Transfer Nodes |
CEN/TS 16157-1:2011 | Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 1: Context and framework |
ISO/IEC 8825-3:2015 | Information technology ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) Part 3: |
ISO/TR 21707:2008 | Intelligent transport systems Integrated transport information, management and control Data quality in ITS systems |
ISO/IEC 18004:2015 | Information technology — Automatic identification and data capture techniques — QR Code bar code symbology specification |
ISO 22179:2009 | Intelligent transport systems Full speed range adaptive cruise control (FSRA) systems Performance requirements and test procedures |
EN 28701:2012 | Intelligent transport systems - Public transport - Identification of Fixed Objects in Public Transport (IFOPT) |
EN 302 895 : 1.1.1 | INTELLIGENT TRANSPORT SYSTEMS (ITS); VEHICULAR COMMUNICATIONS; BASIC SET OF APPLICATIONS; LOCAL DYNAMIC MAP (LDM) |
ISO/IEC/IEEE 21450:2010 | Information technology — Smart transducer interface for sensors and actuators — Common functions, communication protocols, and Transducer Electronic Data Sheet (TEDS) formats |
ISO/TS 18234-1:2013 | Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 1: Introduction, numbering and versions (TPEG1-INV) |
ISO/IEC 8825-1:2015 | Information technology ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) Part 1: |
ISO 14813-6:2009 | Intelligent transport systems Reference model architecture(s) for the ITS sector Part 6: Data presentation in ASN.1 |
ISO/TS 20452:2007 | Requirements and Logical Data Model for a Physical Storage Format (PSF) and an Application Program Interface (API) and Logical Data Organization for PSF used in Intelligent Transport Systems (ITS) Database Technology |
ISO/IEC 15459-4:2014 | Information technology Automatic identification and data capture techniques Unique identification Part 4: Individual products and product packages |
ISO 19136:2007 | Geographic information Geography Markup Language (GML) |
ISO 17363:2013 | Supply chain applications of RFID Freight containers |
ISO/TS 18234-7:2013 | Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 7: Parking information (TPEG1-PKI) |
ISO/TR 24529:2008 | Intelligent transport systems Systems architecture Use of unified modelling language (UML) in ITS International Standards and deliverables |
ISO/TS 21219-14:2016 | Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 14: Parking information application (TPEG2-PKI) |
CEN/TS 15531-4:2011 | Public transport - Service interface for real-time information relating to public transport operations - Part 4: Functional service interfaces: Facility Monitoring |
ISO/TR 17427-2:2015 | Intelligent transport systems Cooperative ITS Part 2: Framework overview |
ISO/IEC 8825-4:2015 | Information technology ASN.1 encoding rules: XML Encoding Rules (XER) Part 4: |
ISO 17687:2007 | Transport Information and Control Systems (TICS) General fleet management and commercial freight operations Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation |
ISO/IEC 8824-2:2015 | Information technology Abstract Syntax Notation One (ASN.1): Information object specification Part 2: |
CEN/TS 16614-2:2014 | Public transport - Network and Timetable Exchange (NeTEx) - Part 2: Public transport scheduled timetables exchange format |
IEEE 802.11-2016 | IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications |
TS 101 556-1 : 1.1.1 | INTELLIGENT TRANSPORT SYSTEMS (ITS); INFRASTRUCTURE TO VEHICLE COMMUNICATION; ELECTRIC VEHICLE CHARGING SPOT NOTIFICATION SPECIFICATION |
ISO 17572-1:2015 | Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 1: General requirements and conceptual model |
ISO/IEC 15961:2004 | Information technology Radio frequency identification (RFID) for item management Data protocol: application interface |
CEN/TS 16157-6:2015 | Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 6: Parking Publications |
ISO/IEC 15459-5:2014 | Information technology Automatic identification and data capture techniques Unique identification Part 5: Individual returnable transport items (RTIs) |
CEN/TS 16614-1:2014 | Public transport - Network and Timetable Exchange (NeTEx) - Part 1: Public transport network topology exchange format |
ISO 6709:2008 | Standard representation of geographic point location by coordinates |
ISO/TR 17427-8:2015 | Intelligent transport systems Cooperative ITS Part 8: Liability aspects |
ISO 21210:2012 | Intelligent transport systems — Communications access for land mobiles (CALM) — IPv6 Networking |
SAE J 2735 : 2016 | DEDICATED SHORT RANGE COMMUNICATIONS (DSRC) MESSAGE SET DICTIONARY |
ISO/TS 24533:2012 | Intelligent transport systems — Electronic information exchange to facilitate the movement of freight and its intermodal transfer — Road transport information exchange methodology |
ISO 14819-3:2013 | Intelligent transport systems Traffic and travel information messages via traffic message coding Part 3: Location referencing for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C |
ISO/TS 17429:2017 | Intelligent transport systems — Cooperative ITS — ITS station facilities for the transfer of information between ITS stations |
ISO 15623:2013 | Intelligent transport systems — Forward vehicle collision warning systems — Performance requirements and test procedures |
ISO/IEC 16388:2007 | Information technology — Automatic identification and data capture techniques — Code 39 bar code symbology specification |
CEN/TS 16157-5:2014 | Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publications |
ISO 14813-1:2015 | Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services |
ISO/IEC/IEEE 21451-2:2010 | Information technology — Smart transducer interface for sensors and actuators — Part 2: Transducer to microprocessor communication protocols and Transducer Electronic Data Sheet (TEDS) formats |
ISO/TR 24532:2006 | Intelligent transport systems Systems architecture, taxonomy and terminology Using CORBA (Common Object Request Broker Architecture) in ITS standards, data registries and data dictionaries |
ISO/TR 17427-10:2015 | Intelligent transport systems Cooperative ITS Part 10: Driver distraction and information display |
ISO/TS 18234-5:2006 | Traffic and Travel Information (TTI) — TTI via Transport Protocol Expert Group (TPEG) data-streams — Part 5: Public Transport Information (PTI) application |
ISO/TS 17426:2016 | Intelligent transport systems — Cooperative systems — Contextual speeds |
ISO/IEC 15424:2008 | Information technology Automatic identification and data capture techniques Data Carrier Identifiers (including Symbology Identifiers) |
ISO 7498-2:1989 | Information processing systems Open Systems Interconnection Basic Reference Model Part 2: Security Architecture |
ISO 26262-9:2011 | Road vehicles Functional safety Part 9: Automotive Safety Integrity Level (ASIL)-oriented and safety-oriented analyses |
ISO/IEC 15420:2009 | Information technology Automatic identification and data capture techniques EAN/UPC bar code symbology specification |
ISO 17267:2009 | Intelligent transport systems — Navigation systems — Application programming interface (API) |
ISO/IEC 8825-6:2015 | Information technology ASN.1 encoding rules: Registration and application of PER encoding instructions Part 6: |
ISO/IEC/IEEE 42010:2011 | Systems and software engineering — Architecture description |
EN ISO 14825:2011 | Intelligent transport systems - Geographic Data Files (GDF) - GDF5.0 (ISO 14825:2011) |
ISO/IEC 19501:2005 | Information technology — Open Distributed Processing — Unified Modeling Language (UML) Version 1.4.2 |
ISO 17365:2013 | Supply chain applications of RFID — Transport units |
ISO 14813-5:2010 | Intelligent transport systems Reference model architecture(s) for the ITS sector Part 5: Requirements for architecture description in ITS standards |
ISO/IEC 8824-4:2015 | Information technology Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications Part 4: |
ISO/TR 17427-9:2015 | Intelligent transport systems Cooperative ITS Part 9: Compliance and enforcement aspects |
CEN/TS 16157-2:2011 | Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 2: Location referencing |
IEC 61375-1:2012 | Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture |
ISO 28219:2017 | Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols |
ISO 26684:2015 | Intelligent transport systems (ITS) Cooperative intersection signal information and violation warning systems (CIWS) Performance requirements and test procedures |
EN 302 665 : 1.1.1 | INTELLIGENT TRANSPORT SYSTEMS (ITS); COMMUNICATIONS ARCHITECTURE |
ISO/TR 17427-3:2015 | Intelligent transport systems Cooperative ITS Part 3: Concept of operations (ConOps) for 'core' systems |
ISO/TR 26999:2012 | Intelligent transport systems — Systems architecture — Use of process-oriented methodology in ITS International Standards and other deliverables |
ISO 19116:2004 | Geographic information Positioning services |
ISO/TR 17427-6:2015 | Intelligent transport systems Cooperative ITS Part 6: 'Core system' risk assessment methodology |
ISO 19101:2002 | Geographic information Reference model |
ISO/IEC 8825-7:2015 | Information technology ASN.1 encoding rules Part 7: Specification of Octet Encoding Rules (OER) |
ISO/TR 25102:2008 | Intelligent transport systems System architecture 'Use Case' pro-forma template |
ISO 26262-2:2011 | Road vehicles Functional safety Part 2: Management of functional safety |
ISO 17572-2:2015 | Intelligent transport systems (ITS) Location referencing for geographic databases Part 2: Pre-coded location references (pre-coded profile) |
ISO 15622:2010 | Intelligent transport systems Adaptive Cruise Control systems Performance requirements and test procedures |
CEN ISO/TS 19091:2017 | Intelligent transport systems - Cooperative ITS - Using V2I and I2V communications for applications related to signalized intersections (ISO/TS 19091:2017) |
EN 15531-2:2015 | Public transport - Service interface for real-time information relating to public transport operations - Part 2: Communications |
TS 101 556-3 : 1.1.1 | INTELLIGENT TRANSPORT SYSTEMS (ITS); INFRASTRUCTURE TO VEHICLE COMMUNICATIONS; PART 3: COMMUNICATIONS SYSTEM FOR THE PLANNING AND RESERVATION OF EV ENERGY SUPPLY USING WIRELESS NETWORKS |
IEC 62580-1:2015 | Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General architecture |
ISO/IEC 15459-1:2014 | Information technology Automatic identification and data capture techniques Unique identification Part 1: Individual transport units |
ISO/IEC/IEEE 21451-4:2010 | Information technology — Smart transducer interface for sensors and actuators — Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formats |
ISO 15394:2017 | Packaging — Bar code and two-dimensional symbols for shipping, transport and receiving labels |
ISO 14819-2:2013 | Intelligent transport systems Traffic and travel information messages via traffic message coding Part 2: Event and information codes for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C |
ISO/IEC 8824-1:2015 | Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation Part 1: |
ISO 17572-3:2015 | Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 3: Dynamic location references (dynamic profile) |
TS 101 539-3 : 1.1.1 | INTELLIGENT TRANSPORT SYSTEMS (ITS); V2X APPLICATIONS; PART 3: LONGITUDINAL COLLISION RISK WARNING (LCRW) APPLICATION REQUIREMENTS SPECIFICATION |
ISO 17364:2013 | Supply chain applications of RFID — Returnable transport items (RTIs) and returnable packaging items (RPIs) |
ISO 24102:2010 | Intelligent transport systems Communications access for land mobiles (CALM) Management |
CEN/TS 16157-4:2014 | Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 4: Variable Message Sign (VMS) Publications |
EN 12896:2006 | Road transport and traffic telematics - Public transport - Reference data model |
ISO 26262-7:2011 | Road vehicles Functional safety Part 7: Production and operation |
EN 15531-3:2015 | Public transport - Service interface for real-time information relating to public transport operations - Part 3: Functional service interfaces |
ISO/IEC 8825-5:2015 | Information technology ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 Part 5: |
ISO/TS 18234-4:2006 | Traffic and Travel Information (TTI) — TTI via Transport Protocol Expert Group (TPEG) data-streams — Part 4: Road Traffic Message (RTM) application |
ISO 21217:2014 | Intelligent transport systems Communications access for land mobiles (CALM) Architecture |
IEEE 1362-1998 | IEEE Guide for Information Technology - System Definition - Concept of Operations (ConOps) Document |
ISO/TS 21219-22:2017 | Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 22: OpenLR location referencing (TPEG2-OLR) |
ISO 26262-10:2012 | Road vehicles Functional safety Part 10: Guideline on ISO 26262 |
PREN 12896-3 : DRAFT 2015 | INTELLIGENT TRANSPORT SYSTEMS - REFERENCE DATA MODEL - PART 3: TIMING INFORMATION AND VEHICLE SCHEDULING |
ISO/TR 17427-7:2015 | Intelligent transport systems Cooperative ITS Part 7: Privacy aspects |
ISO 26262-4:2011 | Road vehicles Functional safety Part 4: Product development at the system level |
IEEE 1609.3-2010 REDLINE | IEEE Standard for Wireless Access in Vehicular Environments (WAVE) - Networking Services |
ISO 14296:2016 | Intelligent transport systems — Extension of map database specifications for applications of cooperative ITS |
ISO 26262-8:2011 | Road vehicles Functional safety Part 8: Supporting processes |
CEN/TS 16157-3:2011 | Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 3: Situation Publication |
ISO/TS 19091:2017 | Intelligent transport systems Cooperative ITS Using V2I and I2V communications for applications related to signalized intersections |
ISO/IEC 8824-3:2015 | Information technology Abstract Syntax Notation One (ASN.1): Constraint specification Part 3: |
ISO/TS 21219-23:2016 | Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 23: Roads and multimodal routes (TPEG2-RMR) |
CEN/TS 16614-3:2016 | Public transport - Network and Timetable Exchange (NeTEx) - Part 3: Public transport fares exchange format |
ISO 26262-3:2011 | Road vehicles Functional safety Part 3: Concept phase |
ISO/TR 17427-4:2015 | Intelligent transport systems Cooperative ITS Part 4: Minimum system requirements and behaviour for core systems |
TS 101 539-1 : 1.1.1 | INTELLIGENT TRANSPORT SYSTEMS (ITS); V2X APPLICATIONS; PART 1: ROAD HAZARD SIGNALLING (RHS) APPLICATION REQUIREMENTS SPECIFICATION |
ISO/IEC 15418:2016 | Information technology Automatic identification and data capture techniques GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance |
ISO 14819-1:2013 | Intelligent transport systems Traffic and travel information messages via traffic message coding Part 1: Coding protocol for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C |
ISO 17438-1:2016 | Intelligent transport systems — Indoor navigation for personal and vehicle ITS station — Part 1: General information and use case definition |
SAE J 2945/9 : 2017 | VULNERABLE ROAD USER SAFETY MESSAGE MINIMUM PERFORMANCE REQUIREMENTS |
ISO 22742:2010 | Packaging — Linear bar code and two-dimensional symbols for product packaging |
ISO 17367:2013 | Supply chain applications of RFID — Product tagging |
EN 15531-1:2015 | Public transport - Service interface for real-time information relating to public transport operations - Part 1: Context and framework |
ISO/IEC 15438:2015 | Information technology Automatic identification and data capture techniques PDF417 bar code symbology specification |
ISO/TS 17423:2014 | Intelligent transport systems Cooperative systems ITS application requirements and objectives for selection of communication profiles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.