S.R. CEN/TR 17105:2017
Current
Current
The latest, up-to-date edition.
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - GUIDANCE ON THE USE OF ECOTOXICITY TESTS APPLIED TO CONSTRUCTION PRODUCTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2017
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Terms and definitions
3 General information on ecotoxicity assessment
4 Sampling and transport of construction products
5 Leaching procedures for ecotoxicological testing
6 Aquatic ecotoxicological testing
7 Assessment of biodegradability
8 Terrestrial ecotoxicological testing
Annex A (informative) - CEN/TC 351 workshop on
Ecotoxicity, biodegradability and construction
products on 10 April 2014 in Brussels - Conclusions
and recommendations
Annex B (informative) - Interface with information derived
from REACH
Annex C (informative) - Information on regulations and
guidelines with relevance for ecotoxicological
assessment of construction works with implications
on construction products
Annex D (informative) - Results from a European round robin
test 'Ecotoxicological characterisation of eluates from
construction products'
Annex E (informative) - Evaluation of test results
Bibliography
Provides information on existing methods to test ecotoxicity of construction products.
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| CEN/TR 17105:2017 | Identical |
| ISO 13829:2000 | Water quality Determination of the genotoxicity of water and waste water using the umu-test |
| ISO 15685:2012 | Soil quality — Determination of potential nitrification and inhibition of nitrification — Rapid test by ammonium oxidation |
| EN ISO 11348-3:2008 | Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:2007) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN ISO 11269-2:2013 | Soil quality - Determination of the effects of pollutants on soil flora - Part 2: Effects of contaminated soil on the emergence and early growth of higher plants (ISO 11269-2:2012) |
| ISO 16072:2002 | Soil quality Laboratory methods for determination of microbial soil respiration |
| EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
| CEN/TS 16637-2:2014 | Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test |
| ISO 11348-1:2007 | Water quality Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) Part 1: Method using freshly prepared bacteria |
| ISO 9439:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test |
| ISO 20079:2005 | Water quality — Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) — Duckweed growth inhibition test |
| ISO 11269-2:2012 | Soil quality — Determination of the effects of pollutants on soil flora — Part 2: Effects of contaminated soil on the emergence and early growth of higher plants |
| ISO 11348-2:2007 | Water quality Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) Part 2: Method using liquid-dried bacteria |
| 305/2011 : 2011 AMD 2 2014 | REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE) |
| ISO 8692:2012 | Water quality — Fresh water algal growth inhibition test with unicellular green algae |
| EN ISO 16072:2011 | Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002) |
| EN ISO 20079:2006 | Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test (ISO 20079:2005) |
| EN ISO 9408:1999 | Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer (ISO 9408:1999) |
| ISO 6341:2012 | Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) — Acute toxicity test |
| ISO 18187:2016 | Soil quality — Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis |
| EN ISO 11348-2:2008 | Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:2007) |
| ISO 17616:2008 | Soil quality Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials |
| ISO 11350:2012 | Water quality — Determination of the genotoxicity of water and waste water — Salmonella/microsome fluctuation test (Ames fluctuation test) |
| ISO 17126:2005 | Soil quality — Determination of the effects of pollutants on soil flora — Screening test for emergence of lettuce seedlings (Lactuca sativa L.) |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| EN ISO 11348-1:2008 | Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:2007) |
| CEN/TS 16637-1:2014 | Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps |
| ISO 940:1979 | Spices and condiments Determination of alcohol-soluble extract |
| ISO 15088:2007 | Water quality Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio) |
| ISO 7827:2010 | Water quality Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium Method by analysis of dissolved organic carbon (DOC) |
| CEN/TR 16220:2011 | Construction products - Assessment of release of dangerous substances - Complement to sampling |
| EN 16105:2011 | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| ISO 11348-3:2007 | Water quality Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) Part 3: Method using freeze-dried bacteria |
| EN ISO 7827:2012 | Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:2010) |
| EN ISO 14852:2004 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:1999) |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN ISO 9439:2000 | Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999) |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| EN ISO 14851:2004 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer (ISO 14851:1999) |
| CEN/TR 16110:2010 | Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste |
| EN ISO 8692:2012 | Water quality - Fresh water algal growth inhibition test with unicellular green algae (ISO 8692:2012) |
| ISO 16240:2005 | Water quality — Determination of the genotoxicity of water and waste water — Salmonella/microsome test (Ames test) |
| CEN/TS 16637-3:2016 | Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test |
| EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| ISO/TS 20281:2006 | Water quality — Guidance on statistical interpretation of ecotoxicity data |
| ISO 5667-16:2017 | Water quality — Sampling — Part 16: Guidance on biotesting of samples |
| EN ISO 15088:2008 | Water quality - Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio) (ISO 15088:2007) |
| ISO 17512-1:2008 | Soil quality — Avoidance test for determining the quality of soils and effects of chemicals on behaviour — Part 1: Test with earthworms (Eisenia fetida and Eisenia andrei) |
| EN ISO 5667-16:2017 | Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017) |
| ISO 14852:1999 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide |
| ISO 14851:1999 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by measuring the oxygen demand in a closed respirometer |
| EN ISO 6341:2012 | Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.