Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PREN 50330-1 : DRAFT 99

Current

Current

The latest, up-to-date edition.

PHOTOVOLTAIC SEMICONDUCTOR CONVERTERS - PART 1: UTILITY INTERACTIVE FAIL SAFE PROTECTIVE INTERFACE FOR PV-LINE COMMUTATED CONVERTERS - DESIGN QUALIFICATION AND TYPE APPROVAL

Published date

12-01-2013

Sorry this product is not available in your region.

1 Scope
2 Purpose
3 Normative references
4 Requirements
  4.1 General Requirements
  4.2 Specified Requirements
5 Type test
  5.1 The test for single fault safety, including the
      detection of faults entailing a blockage in accordance
      with 4.2, is effected by fault simulation
  5.2 The test circuit simulates islanding conditions
      under which the MSDs must defect the interruption of
      the mains circuit and disconnect the feed from the
      house-load generator by means of the switching devices
      from the mains in the affected external and neural
      conductors within 5 s (Figure 2):
  5.3 The procedure of the MSD test is as follows:
  5.4 In order to test the overvoltage and undervoltage
      controlling device, the inverter has to be connected
      via a transformer with a varying transformation ratio
      and operated at a rated a.c. voltage and a random
      output
  5.5 In order to test the a.c. voltage characteristics
      during short circuit condition, the inverter has to be
      operated at the rated output and a short circuit has to
      be caused at the output with a resistance of 1 W. The
      voltage drop at this resistance is to be measured on
      an oscilloscope from the time the short circuit has been
      produced up to the moment the stationary state has been
      reached
6 Routine test
7 Rechecks of automatic disconnecting facilities
8 Installation

Describes the general design principles and test procedures to a fail safe protective interface, which has to disconnect automatically the link between the power conditioning subsystem and the utility grid, if there are needs on the utility or the user side.

Committee
BTTF 86-2
DocumentType
Draft
PublisherName
European Committee for Standards - Electrical
Status
Current

Standards Relationship
99/240939 DC : DRAFT MAR 99 Identical

EN 50081-1:1992 Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry
EN 50160 : 2010 AMD 1 2015 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
IEC 60146-1-3:1991 Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors
EN 60146-1-1:2010 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
EN 61727:1995 Photovoltaic (PV) systems - Characteristics of the utility interface
IEC 61508-5:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
IEC 61727:2004 Photovoltaic (PV) systems - Characteristics of the utility interface
IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
EN 50178:1997 Electronic equipment for use in power installations
EN 60146-1-3:1993 Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors
IEC 60146-1-1:2009 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
EN 50082-2 : 95 AC 95 ELECTROMAGNETIC COMPATIBILITY - GENERIC IMMUNITY STANDARD - INDUSTRIAL ENVIRONMENT
IEC 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more