PREN 4832 : DRAFT 2017
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION
Withdrawn date
12-11-2017
Published date
13-02-2017
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Technical Requirements
4 Performances
5 Quality Assurance
6 Preparation for delivery
Bibliography
Sets up the requirements for Ring locked fitting assemblies according to EN 4833 and EN 4836, for use in aircraft systems at nominal operating pressure of 35000 kPa (5080 psi) maximum and temperature range of -54 degrees C to +135 degrees C (-65 degrees F to +275 degrees F).
| DocumentType |
Draft
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DIN EN 4832:2017-11 (Draft) | Identical |
| 14/30310864 DC : 0 | BS EN 4834 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) PORT FOR RING LOCKED FITTING - INCH SERIES - GEOMETRIC CONFIGURATION |
| 14/30310863 DC : 0 | BS EN 4833 - AEROSPACE SERIES - PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING - FLARED END - INCH SERIES - WITH EXTRA FINE THREAD PITCH |
| 14/30310866 DC : 0 | BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES |
| 14/30310865 DC : 0 | BS EN 4835 - AEROSPACE SERIES - INSTALLATION AND REMOVAL REQUIREMENTS FOR RING LOCKED FITTING AND REDUCER, 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) - INCH SERIES |
| PREN 4833 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| PREN 4836 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| PREN 4834 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) PORT FOR RING LOCKED FITTING - INCH SERIES - GEOMETRIC CONFIGURATION |
| SAE AMS 2486 : 2010 | CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE |
| PREN 4833 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| SAE AMS5659S : 2016 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE AMS QQ A 225/9 : 2014 | ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AS 5620 : 2013 | TITANIUM HYDRAULIC TUBING, TI-3AL-2.5V COLD WORKED AND STRESS RELIEVED, UP TO 35000 KPA (5080 PSI), REQUIREMENTS FOR QUALIFICATION TESTING AND CONTROL |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN 3311:2009 | Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D < 110 mm |
| SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| ISO 2685:1998 | Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones |
| ISO 10583:1993 | Aerospace fluid systems — Test methods for tube/fitting assemblies |
| SAE AMS 5643 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5743 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED |
| PREN 3314 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - SOLUTION TREATED AND AGED - BAR FOR MACHINING - D <= 75 MM |
| ISO 6772:2012 | Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies |
| SAE AMS 4965 : 2014 | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED |
| SAE AMS 5734 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED |
| ISO 11218:2017 | Aerospace Cleanliness classification for hydraulic fluids |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| PREN 4836 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| EN 2424:2008 | Aerospace series - Marking of aerospace products |
| ISO 7257:2016 | Aircraft Hydraulic tubing joints and fittings Rotary flexure test |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| ISO 7137:1995 | Aircraft — Environmental conditions and test procedures for airborne equipment |
| SAE AS 5000 : 2010 | FITTING, PLUG-IN UNION, RING LOCKED, 24 DEGREE CONE, FLUID CONNECTION, 5080 PSI (35000 KPA), SPECIFICATION FOR |
| SAE AMS 4967 : 2014 | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| ISO 3161:1999 | Aerospace — UNJ threads — General requirements and limit dimensions |
| SAE AMS 4928 : 2016 | TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED |
| PREN 4834 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) PORT FOR RING LOCKED FITTING - INCH SERIES - GEOMETRIC CONFIGURATION |
| ISO 6773:1994 | Aerospace Fluid systems Thermal shock testing of piping and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.