PREN 3155-061 : 200P1
Current
The latest, up-to-date edition.
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 061: CONTACTS, ELECTRICAL, COAXIAL, SIZE 12, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD
Hardcopy , PDF
English
31-03-2001
0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Required characteristics
5 Designation
6 Marking
7 Technical specification
Specifies the required characteristics, tests and tooling applicable to size 12, female coaxial, electrical contacts, type D, solder, class R, used in elements of connection according to EN 3155-002
DevelopmentNote |
To be used together with PREN 3155-001 (08/2003)
|
DocumentType |
Draft
|
Pages |
11
|
PublisherName |
Aerospace & Defence Industries Association of Europe
|
Status |
Current
|
Standards | Relationship |
DIN EN 3155-061:2007-10 | Identical |
EN 2591-306:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
EN 2591-301:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part C1: Endurance at temperature |
EN 3155-001:2016 | Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification |
EN 2591-305:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
EN 2591-213:1997 | Aeropsace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz |
EN 2591-418:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 418: Gauge insertion/extraction forces (female contacts) |
EN 2591-502:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry |
EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
EN 2591:1992 | Aerospace series - Elements of electrical and optical connection - Test methods - General |
TR 6058 : 2011 | AEROSPACE SERIES - CABLE CODE IDENTIFICATION LIST |
MS3197 Revision G:1983 | GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST |
MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
EN 2591-201:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B1: Contact resistance - Low level |
MIL-I-81969-8 Revision B:1986 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPES 1 AND LI, CLASS 2, COMPOSITION A |
EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
EN 2591-417:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection) |
EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
MIL-C-39029-75 Revision B:1985 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-C-38999 SERIES 1, 3 AND 4CONNECTORS) |
EN 2591-406:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance |
MIL-I-81969-14 Revision C:1987 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B |
EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
EN 2591-204:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B4: Discontinuity of contacts in the microsecond range |
MIL L 7870 : B | LUBRICATING OIL, GENERAL PURPOSE, LOW TEMPERATURE |
EN 2591-206:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B6: Measurement of insulation resistance |
EN 2591-210:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
PREN 2591-212 : 200P1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 212: SURFACE TRANSFER IMPEDANCE |
QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
EN 3155-060:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 060: Contacts, electrical, coaxial, size 12, male, type D, solder, class R Product standard |
SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
EN 2591-503:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping |
EN 2591-202:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B2: Contact resistance at rated current |
MIL-A-8243 Revision D:1985 | ANTI-ICING AND DEICING-DEFROSTING FLUIDS |
EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
EN 3155-002:2011 | Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts |
EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
EN 2591-207:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B7: Voltage proof test |
EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength |
EN 2591-415:2001 | Aerospace series - Elements of electrical and optical connection - Test methodsPart 415: Test probe damage (female contacts) |
MIL-I-81969 Revision B:1982 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR |
EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.